

Initial driver
Easily PCBA-able BLDC driver
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 95
- Pads
- 161
- Tracks, vias
- 2, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 7 Jan 2024
- Updated
- 7 Sep 2024
Overview
Initial driver is an open-source printed circuit board by jediminer543, from the jediminer543/animated-robot repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 8 parts on 95 nets, routed with 2 tracks and 0 vias.
It is built around the ESP32-S3-WROOM-1-N8, TPS54260DRC and PT5616A. Its parts include 4 ICs, 3 transistors and 1 connector. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesTPS54260DRC
VSON-10-EP(3x3)-40℃~+150℃@(TJ) 1 100kHz~2.5MHz、581kHz 138uA 2.5A 3.5V~60V Adjustable Buck Buck Built-in No VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersPT5616A
SOP-28-300mil-40℃~+125℃ 11V~18V 120ns 1mA 2.5V 200mA 400mA 480ns 500ns 50ns 6 800mV Full-Bridge、Three Phase IGBT、MOSFET Under Voltage Protection、Over Current Protection、Overtemperature protection (OTP) SOP-28-300mil Gate Drivers ROHSPTCBrushless DC (BLDC) Motor Driver
README
README.mdanimated-robot
Easily PCBA-able BLDC driver
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | TPS54260 | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm | U2, U3 |
| 1 | ESP32-S3-WROOM-1 | PCM_Espressif:ESP32-S3-WROOM-1 | U1 |
| 1 | PT5616A | Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm | U4 |
| 1 | UFET | Missing_Symbols:PDFN8L | Q1 |
| 1 | USB_C | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J4 |
| 1 | VFET | Missing_Symbols:PDFN8L | Q2 |
| 1 | WFET | Missing_Symbols:PDFN8L | Q3 |
More from jediminer543/animated-robot
1- 4 layers67.2 × 90.4 mm

Similar boards
- 2 layers85 × 115 mm

OSO BOOK B1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.
76 parts8.1kCC-BY-SA-4.0 - 2 layers299 × 82.5 mm

PixelWave
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
663 parts915 - 4 layers56.5 × 99.8 mm

BitaxeGamma
bitaxeorg/bitaxeGamma
Bitaxe based on the BM1370 from the S21 Pro
147 parts432CERN-OHL-S-2.0 - 2 layers129.5 × 50.8 mm

- 4 layers84.5 × 129.5 mm

- 2 layers110 × 115 mm

Esp32 keyboard v0.1
hhuysqt/esp32s3-keyboard
USB/BLE keyboard driver based on ESP32S3-WROOM-1
230 parts168GPL-3.0 - 2 layers35.1 × 36.6 mm

BinNanoFOC
katbinaris/nanofoc_devkit
Compact All-In-One BLDC Controler featuiring ESP32-S3, TMC6300 and Magalpha sensors. Small 35x35mm footprint.
76 parts146 - 2 layers148 × 81 mm

Communicator pcb
Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge
58 parts107MIT
Questions
What parts does the Initial driver use?
8 parts, built around the ESP32-S3-WROOM-1-N8, TPS54260DRC and PT5616A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Initial driver KiCad files?
From the jediminer543/animated-robot repository on GitHub, at the commit this page was made from: the board is hardware/initial-driver/initial-driver.kicad_pcb and its schematic hardware/initial-driver/initial-driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Initial driver design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).