

Linkodrive08
Easily PCBA-able BLDC driver
- Size
- 67.2 × 90.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 161
- Nets
- 129
- Pads
- 525
- Tracks, vias
- 1,842, 2,411
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Jan 2024
- Updated
- 7 Sep 2024
Overview
Linkodrive08 is an open-source printed circuit board by jediminer543, from the jediminer543/animated-robot repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 67.2 × 90.4 mm with 161 parts on 129 nets, routed with 1,842 tracks and 2,411 vias.
It is built around the CH32V203G6U6, SN65HVD230D and LGS5145, with the XL1509-ADJ, ES2JW and JMTK80N06A among its other parts. Its parts include 53 resistors, 38 capacitors, 19 connectors, 16 diodes and 6 transistors. It belongs with the RISC-V boards of this library.
Main components
7CH32V203G6U6
QFN28X4Others QFN28X4 Microcontrollers (MCU/MPU/SOC) ROHSWCH (Nanjing Qinheng Microelectronics)Microcontrollers (MCU/MPU/SOC)SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversLGS5145
SOT-23-6-40℃~+105℃@(TJ) 1 1.2MHz 150uA 1A 4.5V~55V Adjustable Buck Buck Built-in No SOT-23-6 DC-DC Converters ROHSLegend-SiDC-DC ConvertersXL1509-ADJ
SOIC-8-40℃~+125℃ 1 1.23V~37V 150kHz 2A 2mA 4.5V~40V Adjustable Buck Buck Built-in No SOIC-8 DC-DC Converters ROHSUMWDC-DC ConvertersES2JW
SOD-123FL-55℃~+150℃ 1 Independent 1.68V@2A 2A 35ns 50A 5uA@600V 600V SOD-123FL Fast Recovery / High Efficiency Diodes ROHSShandong Jingdao MicroelectronicsFast Recovery / High Efficiency DiodesJMTK80N06A
TO-252-4R-55℃~+175℃ 1 N-channel 108W 257pF 4.136nF 4V 60V 7mΩ@10V 80A 90nC TO-252-4R MOSFETs ROHSJiangsu JieJie MicroelectronicsMOSFETsDSK310
SOD-123FLSchottky Diodeshongjiacheng
README
README.mdanimated-robot
Easily PCBA-able BLDC driver
Parts
161| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R4, R7, R26, R28, R41, R48, R49, R50, R51, R52, R53 |
| 11 | NT | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3, NT4, NT5, NT6, NT7, NT8, NT9, NT10, NT11 |
| 8 | Rs | Resistor_SMD:R_0603_1608Metric | R21, R22, R23, R24, R38, R39, R46, R47 |
| 6 | 10R | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R18, R35, R36 |
| 6 | 51R | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14, R33, R34 |
| 6 | Cg | Capacitor_SMD:C_0603_1608Metric | C11, C12, C13, C14, C30, C31 |
| 6 | ES2JW | Diode_SMD:D_SOD-123F | D5, D6, D7, D8, D10, D11 |
| 6 | JMTK80N06A | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C7, C8, C9, C34 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C10, C26 |
| 4 | 1n | Capacitor_SMD:C_0603_1608Metric | C2, C21, C22, C35 |
| 4 | 39k | Resistor_SMD:R_0603_1608Metric | R6, R25, R27, R40 |
| 4 | 5m | Resistor_SMD:R_2512_6332Metric | R19, R20, R31, R37 |
| 4 | Cs | Capacitor_SMD:C_0603_1608Metric | C18, C19, C33, C38 |
| 4 | DSK310 | Diode_SMD:D_SOD-123F | D3, D4, D9, D12 |
| 3 | 100u | Capacitor_SMD:C_Elec_10x10.2 | C20, C23, C24 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R29, R45 |
| 3 | 470n | Capacitor_SMD:C_0805_2012Metric | C5, C6, C28 |
| 3 | 4R7 | Resistor_SMD:R_0603_1608Metric | R9, R10, R32 |
| 3 | LED_Y | LED_SMD:LED_0603_1608Metric | D14, D15, D16 |
| 2 | 18p | Capacitor_SMD:C_0402_1005Metric | C16, C17 |
| 2 | 2u2 | Capacitor_SMD:C_0805_2012Metric | C32, C37 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C15, C36 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 0R | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | R8 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C27 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C25 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C29 |
| 1 | 10uH | Inductor_SMD:L_Changjiang_FNR5040S | L2 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric | R44 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R43 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R42 |
| 1 | 47u | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | CAN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J8 |
| 1 | CH32V203G6U6 | Package_DFN_QFN:QFN-28-1EP_4x4mm_P0.4mm_EP2.6x2.6mm_ThermalVias | U3 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | D_Clamp | Diode_SMD:D_SOD-123 | D13 |
| 1 | ENC | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J10 |
| 1 | GATE_DRIVE | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | GND | TestPoint:TestPoint_Plated_Hole_D4.0mm | J19 |
| 1 | HALL | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J13 |
| 1 | LED_G | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LED_R | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LGS5145 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | LKS32MC086NxQx | missing_symbols:QFN-52-1EP_6x6mm_P0.4mm_EP4.5x4.5mm_ThermalVias | U1 |
| 1 | LKS_3V3TST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3 |
| 1 | LKS_I2C | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J11 |
| 1 | LKS_IO | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J6 |
| 1 | LKS_RX | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6 |
| 1 | LKS_SIF | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | LKS_SPI | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | LKS_SWD | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J12 |
| 1 | LKS_TX | TestPoint:TestPoint_Pad_1.5x1.5mm | TP5 |
| 1 | LKS_VTST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP4 |
| 1 | LOGIC_POWER | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | MOT_U | TestPoint:TestPoint_Plated_Hole_D4.0mm | J14 |
| 1 | MOT_V | TestPoint:TestPoint_Plated_Hole_D4.0mm | J15 |
| 1 | MOT_W | TestPoint:TestPoint_Plated_Hole_D4.0mm | J16 |
| 1 | RX_JP | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP2 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TX_JP | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 1 | VBAT_MES | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1 |
| 1 | VBUS | TestPoint:TestPoint_Plated_Hole_D4.0mm | J1 |
| 1 | VBUS_ISO | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP3 |
| 1 | VDrive_ISO | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP4 |
| 1 | WCH_GPIO | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J17 |
| 1 | WCH_SWD | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J9 |
| 1 | WCH_UART_ALT | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J18 |
| 1 | WCH_VTST | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2 |
| 1 | XL1509-ADJ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
More from jediminer543/animated-robot
1- 2 layers

Similar boards
- 4 layers84.3 × 93.1 mm

- 4 layers99 × 99 mm

Twin GaN VESC
NovaPrime18/Twin-GaN
Twin motordriver with GaN powerstages, compatible with VESC-Tool
325 partsCERN-OHL-S-2.0 - 2 layers191 × 125.5 mm

Xcku5p board
sjbar03/XCKU5P-Development-Notes
Notes while learning how to develop with the Xilinx Ultrascale+ XCKU5P FPGA. Also notes on PCB design.
96 parts3 - 6 layers40 × 100 mm

Digi
cookiemonsternz/Eurorack-DIGI
DIGI utilises an ice40UP5K fpga chip, featuring 5280 luts and a 48Mhz clock. This is accompanied by a USB-SPI interface for easy programming.
139 parts - 4 layers98 × 58 mm

Edf esc
iamdarshg/edf-esc
Open hardware and firmware for a compact 98 mm × 58 mm, four-layer board with two independent 6S sensorless BLDC/EDF controller channels.
99 partsMIT - 2 layers121.8 × 88 mm

- 2 layers105 × 24 mm

CL pcb xL
ybzwork/CareDose_Healthcare
This repository documents the hardware and embedded-systems work carried out during a 2-month internship at CareDose Health-Tech Pvt. Ltd., a health-tech startup building intelligent medication-packaging systems.
26 parts - 2 layers80 × 47 mm
/terminal.kicad_pcb.jpg?size=s&soon)
Questions
How big is the Linkodrive08 PCB?
It measures 67.2 × 90.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Linkodrive08 use?
161 parts, built around the CH32V203G6U6, SN65HVD230D, LGS5145 and XL1509-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Linkodrive08 KiCad files?
From the jediminer543/animated-robot repository on GitHub, at the commit this page was made from: the board is hardware/linkodrive08/linkodrive08.kicad_pcb and its schematic hardware/initial-driver/initial-driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Linkodrive08 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).