
Emc flyback
ChengminLi/AI-PCB-layout
AI agent skill for designing and reviewing power-electronics PCBs, with a human review gate after every step

A KiCAD circuit board for embedding an Arduino Nano V3 and breaking out the I/O pins for GRBL.
Nano grbl is an open-source printed circuit board by jcalcote, from the jcalcote/nano-grbl repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 100 × 50 mm with 21 parts on 34 nets, routed with 115 tracks and 4 vias.
It is built around the LTV-817S. Its parts include 9 connectors, 6 resistors, 3 ICs and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A KiCAD circuit board for embedding an Arduino Nano V3 and breaking out the I/O pins for GRBL.
This KiCAD project is a simple pcb allowing the embedding of an entire Arduino Nano along side minimal additional hardware for breaking out and labling I/O pins for the GRBL gcode interpreter software package.

To use this KiCAD project, you should also clone my KiCAD parts library and add it to your clone of this project. See https://github.com/jcalcote/KiCAD-footprints.
Creative Commons Zero 1.0 - Use at will and please enjoy.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 3 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U1, U2, U3 |
| 1 | 12V Power In | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J4 |
| 1 | 3.3V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | LOGO | nano-grbl:nano-grbl-logo | G*** |
| 1 | SW_SPST | Switech-SW-TS3545:SW_SPST_MOMENTARY_3x6_SMD | SW1 |
| 1 | Serial I/O | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Stepper Driver | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J5 |
| 1 | System Control | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J1 |
| 1 | X Limit | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J7 |
| 1 | Y Limit | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J8 |
| 1 | Z Limit | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J9 |

ChengminLi/AI-PCB-layout
AI agent skill for designing and reviewing power-electronics PCBs, with a human review gate after every step


anway0404/Arduino_OpenTherm_shield
Arduino hardware shield to send and receive data from Opentherm devices

max-verem/stm32_ltc_encoder
STM32 based SMPTE Linear Timecode Generator/Reader, isolated input/output


CarletonURocketry/hybrid-valve-board
KiCAD board project that keeps hybrid rocket valves open during flight.

inoa-io/satellite
Satellite Hardware Project and Documentation

48productions/Perpetual-Free-Credits-PCB
A reversible, non-destructive arcade cabinet addon board to keep your games fully credited up at all times.
It measures 100 × 50 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the LTV-817S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jcalcote/nano-grbl repository on GitHub, at the commit this page was made from: the board is nano-grbl.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).