
GPSDOMonitor
sergeyvfx/GPSDOMonitor
A tiny module which is connecting to a databus of GPSDO modules with the goal to visualize when the PLL is locked, GPS time is stabilized and things like this.

KiCAD board project that keeps hybrid rocket valves open during flight.
Hybrid valve board is an open-source printed circuit board by CarletonURocketry, from the CarletonURocketry/hybrid-valve-board repository on GitHub. It is a 2-layer board of 68 × 79 mm with 54 parts on 31 nets, routed with 244 tracks and 16 vias.
It is built around the ATTINY85-20PU, LTV-817S and CRCW080510K0FKEAC, with the HSMG-C170, SDR10EZPJ152 and RBR3LAM60BTR among its other parts. Its parts include 14 resistors, 10 diodes, 10 connectors, 7 transistors and 4 ICs. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.

This board keeps the 3 flight valves powered in flight when disconnected from the ground systems in order to not dump nitrous oxidizer anywhere except the combustion chamber. Otherwise, we don't fly very long.
The board is mainly controlled by an ATTiny85 MCU, and is powered using a Li-Ion battery as well as a 24V (between 20-24V) rail for supplying the solenoids. It is essentially a fancy switch.
You can view the PCB using KiCanvas here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R6, R7, R12, R13, R14 |
| 4 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R11 |
| 4 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D7, D8, D9, D10 |
| 4 | ~ | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10 |
| 3 | Backflow | Diode_SMD:D_SOD-128 | D1, D2, D3 |
| 3 | Flyback | Package_TO_SOT_SMD:TO-263-2 | D4, D5, D6 |
| 3 | LTV-817S | Package_DIP:SMDIP-4_W9.53mm | U2, U3, U4 |
| 3 | NMOS | Package_TO_SOT_SMD:SOT-23-3 | Q5, Q6, Q7 |
| 3 | PMOS | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q3 |
| 3 | XV In | MiniFitJR:1726480102 | J3, J4, J5 |
| 3 | XV Out | MiniFitJR:1726480102 | J7, J8, J9 |
| 2 | 100u | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | ARM | MiniFitJR:1726480102 | J10 |
| 1 | ATtiny85-20P | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | Continuity | MiniFitJR:1726480102 | J6 |
| 1 | LOGO | hybrid-valve-board:fed-logo-40mm | G*** |
| 1 | LOGO | hybrid-valve-board:inspace-logo-20mm | G*** |
| 1 | MCU Supply | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | PMOS | Package_TO_SOT_SMD:SOT-23-3 | Q4 |
| 1 | XV Supply | MiniFitJR:1726480102 | J1 |

sergeyvfx/GPSDOMonitor
A tiny module which is connecting to a databus of GPSDO modules with the goal to visualize when the PLL is locked, GPS time is stabilized and things like this.


kkrizka/powerboard_mass_test_adapter_active
Active Part of the Mass Test Board for ITk Strips PowerBoard





alessandrocardelli/filament-dryer-monitor
ESP32 controller for eSUN eBOX Lite. main is the non-heating SAFE BRING-UP reference; its heater output remains locked OFF.
It measures 68 × 79 mm and has 2 copper layers, 1.6 mm thick.
54 parts, built around the ATTINY85-20PU, LTV-817S, CRCW080510K0FKEAC and HSMG-C170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CarletonURocketry/hybrid-valve-board repository on GitHub, at the commit this page was made from: the board is hybrid-valve-board.kicad_pcb and its schematic hybrid-valve-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CarletonURocketry before reusing the design.