Skip to the content
2 layersOut dac, the printed circuit board in 3D

Small HiFi audio system for good sound in small rooms

Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
30
Pads
54
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 4
Created
20 Aug 2017
Updated
10 Nov 2021

Overview

Out dac is an open-source printed circuit board by janhieber, from the janhieber/small_hifi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 9 parts on 30 nets.

It is built around the PCM5102PW. Its parts include 4 capacitors, 1 IC and 1 connector. It belongs with the audio and music boards and the STM32 boards of this library.

Main components

1

README

README.md

Join the chat at https://gitter.im/small_hifi/Lobby

About

This project is about creating a small HiFi audio system.

We intend to build a two way stereo system (2 boxes, each 2 speakers) with small size (front not bigger then DIN A4 paper).

The systems purpose is providing good audio quality in small rooms.
The speakers can be places on a desk besides the computer screen for example.

System design and architecture

Master box:

  • DSP audio crossover with various input cards
  • 2 x class D amps, for each speaker one
  • Tweeter + mid-range driver

Slave Box:
Same as master box, but no crossover and input stuff.
Master box provides the ready to use audio signal and a data link for slave via SPDIF.

Master box should run in mono mode when slave is not present.

system architecture Edit system_architecture.xml on draw.io

Technical

  • Controlboard
    • Input electronics (USB, BT, analog, ...)
    • STM32 controller (for DSP and other stuff)
    • DAC and volume control
    • Small high quality power supply
  • Amplifier
    • Class D amplifier
    • High power (switching?) supply
  • Box
    • Mid-range driver
    • Tweeter
    • Chassis

Tools

We try to use free tools when possible.

Contributing

Most small things may be done in master branche.
For change/redesign use a dedicated branch!

Example, if you develop a new input board, you can do this on master. But if you decide to redesign a board or part of a board, make a branch for it and merge it to master when its finished and proven.

If you are tired of merging in master you can always make a branch for yourself and merge your work into master when finshed.

We have some good knowledge on making this real, but of course we don't know everything and we don't want to spend years making this perfect. So if you want to contribute, feel free to contact us.

Parts

9
QtyValueFootprintReferences
4100nCapacitors_SMD:C_0603C1, C6, C8, C9
3jumperPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmJP1, JP2, JP3
1CONN_01X20Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mmJ1
1PCM5102Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mmU1

Similar boards

  • 2 layers53.5 × 101.8 mmSony scopeman, the printed circuit board in 3D

    Sony scopeman

    lucysrausch/sony-scopeman

    Hardware Design files of a replacement mainboard for the Sony Watchman FD-10. This turns it into a bluetooth and WiFi-enabled vector display.

    135 parts69
  • 2 layersT41-Main+RF board V012, the printed circuit board in 3D

    T41-Main+RF board V012

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    255 parts66
  • 4 layers55 × 97 mmMelodio SelfMate V2, the printed circuit board in 3D

    Melodio SelfMate V2

    zeeblaze/Melodio-SelfMate

    Your Ultimate Portable Music Companion For Home Automation.

    121 parts53
  • 2 layers80 × 65 mmSquishbox8, the printed circuit board in 3D

    Squishbox8

    GeekFunkLabs/squishbox

    Software and design files for a Raspberry Pi sound module enclosure

    35 parts51MIT
  • 2 layers150.5 × 127 mmEurorack engine, the printed circuit board in 3D

    Eurorack engine

    sinneb/esp32-hvcc

    Heavy compiler (hvcc) sources running on ESP32-DevKitC powered eurorack module

    81 parts29
  • 2 layers130.8 × 81.5 mmMinidexed, the printed circuit board in 3D

    Minidexed

    handeyeco/minidexed-pcb

    PCB for MiniDexed

    53 parts23
  • 2 layers39.9 × 54.6 mmSimplecodec3, the printed circuit board in 3D

    Simplecodec3

    cyberomusubi/simplecodec3

    Audio input/output board for Raspberry Pi, Jetson Nano (PCM5102A+PCM1808)

    44 parts19
  • 2 layers99.1 × 72.9 mmTone ale, the printed circuit board in 3D

    Tone ale

    lxschwalb/tone_ale

    rp2040 based guitar pedal

    57 parts19

Questions

What parts does the Out dac use?

9 parts, built around the PCM5102PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Out dac KiCad files?

From the janhieber/small_hifi repository on GitHub, at the commit this page was made from: the board is controlboard/out_dac/out_dac.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Out dac design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).