
Gswitch brain
MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it

PCB for MiniDexed
Minidexed is an open-source printed circuit board by handeyeco, from the handeyeco/minidexed-pcb repository on GitHub. It is a 2-layer board of 130.8 × 81.5 mm with 53 parts on 64 nets, routed with 290 tracks and 20 vias.
It is built around the 74HCT14D, H11L1 and PCM5102PW, with the 1N4148WS among its other parts. Its parts include 16 capacitors, 14 resistors, 6 connectors, 4 ICs and 4 switches.
[!CAUTION] This project was made by a JavaScript developer, not an electrical engineer.
It should be assumed that everything is wrong and the project will set your house on fire.
I am not responsible for anything ever.

Custom PCB for MiniDexed, an open-source FM synthesizer. It has:
See the writeup on my blog for a full explanation of the circuit.
Thanks to lots of folks!
Look in /gerbers/ for build files and BOMs.
Working with the MiniDexed 2024-01-16 release.
No known issues (although MIDI out is untested right now). The whole thing is about the size of a Korg NTS-1 and costs roughly $15/PCB to make (including SMT assembly and SMT parts; not including the Pi, THT components, or shipping).
Required changes to minidexed.ini:
# Sound device
SoundDevice=i2s
#SoundDevice=pwm
#SoundDevice=hdmi
# ...unchanged...
ButtonPinBack=16
ButtonActionBack=click
ButtonPinSelect=27
ButtonActionSelect=click
ButtonPinHome=26
ButtonActionHome=click
# ...unchanged...minidexed-bom-smd.csvminidexed-bottom-pos.csvMX1A-_1NW, the W is PCB mount

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C5, C7, C9, C16 |
| 5 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R10, R11, R13, R14 |
| 4 | 10uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C10, C13 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R5 |
| 3 | 22 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9 |
| 3 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R4, R12 |
| 3 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3 |
| 2 | 10nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 2.2nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C15 |
| 2 | 2.2uf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C8 |
| 1 | 10k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 3.3V Analog DAC | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | 3.3V Digital DAC | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | 5V Analog DAC | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | 74HCT14 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U3 |
| 1 | A3.3V ME6211C33 | Package_TO_SOT_SMD:TSOT-23-5 | U1 |
| 1 | Audio Out | sparkfun 3.5mm:sparkfun_3.5mm_trs | J1 |
| 1 | B1 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | B2 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW3 |
| 1 | B3 | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW4 |
| 1 | Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | GND TP | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | H11L1 | SOP-6_6.5x7.12mm_P2.54mm:SOP-6_6.5x7.12mm_P2.54mm | U4 |
| 1 | MIDI In | sparkfun 3.5mm:sparkfun_3.5mm_trs | J2 |
| 1 | MIDI Out | sparkfun 3.5mm:sparkfun_3.5mm_trs | J5 |
| 1 | MIDI Thru | sparkfun 3.5mm:sparkfun_3.5mm_trs | J4 |
| 1 | PCM5102 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Raspberry_Pi_2_3 | raspberry-pi_rpi_hat:raspberry-pi_rpi_hat | J3 |
| 1 | WC1602A | Display:WC1602A | DS1 |

MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it



GeekFunkLabs/squishbox
Software and design files for a Raspberry Pi sound module enclosure
xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice


bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)

It measures 130.8 × 81.5 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the 74HCT14D, H11L1, PCM5102PW and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the handeyeco/minidexed-pcb repository on GitHub, at the commit this page was made from: the board is minidexed.kicad_pcb and its schematic minidexed.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask handeyeco before reusing the design.