
Minimidi v1 panellized 4x
bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)

Controller is an open-source printed circuit board by bjonnh, from the bjonnh/2024_emmg_workshop_midi repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 97.3 × 120.4 mm with 56 parts on 68 nets, routed with 455 tracks and 48 vias.
It is built around the 74HC4051, H11L1 and SJ-3524-SMT-TR, with the 1N4148WS among its other parts. Its parts include 20 resistors, 4 ICs, 2 connectors, 1 capacitor and 1 diode. It belongs with the RP2040 boards of this library.
Work in progress
More explanations here: https://www.bjonnh.net/project/emmg_midi_synth_controller/
Inspired by: https://github.com/todbot/eight_by https://github.com/todbot/picoslidertoy https://github.com/todbot/pico_test_synth
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1M | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 |
| 12 | TOUCHPADA | MIDI_projects:PAD_Touch_bjo | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 8 | 10K | MIDI_projects:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8 |
| 3 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | Hole1, Hole2, Hole3 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric | R3, R6 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | DR1, DT1 |
| 2 | SJ-3524-SMT | MIDI_projects:CUI_SJ-3524-SMT | J1-I1, J11-O1 |
| 1 | 10 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 1N4148WS | Diode_SMD:D_SOD-323 | D1 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 33 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 74HC4051 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | DISPLAY-OLED-128X64-I2CTOD | MIDI_projects:DISPLAY-OLED-128X64-I2C-TOD | DISP1 |
| 1 | H11L1 | Package_DIP:SMDIP-6_W9.53mm | U1 |
| 1 | I2S_PCM_51XX_SOUNDCARD | MIDI_projects:I2S_PCM_5100_SOUNDCARD | U4 |
| 1 | MountingHoles are 3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | Hole4 |
| 1 | Pico | MIDI_projects:RPi_Pico_SMD_TH | U3 |
| 1 | SW_Omron_B3FS | Button_Switch_SMD:SW_SPST_Omron_B3FS-101xP | SW1 |

bjonnh/dinoctopus
A MIDI router and USB interface using a Raspberry PICO (RP2040)

todbot/synthiota
Pico/Pico2-based board for playing with synthesizers in CircuitPython

xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice




MarkWestbroek/MusicBrain
A central brain running on teensy or a lighter MCU to process any control signals (MIDI, CV, our own) into the same but adding logic, ADSRs, DCOs, CV matrices etc. to it
It measures 97.3 × 120.4 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the 74HC4051, H11L1, SJ-3524-SMT-TR and 1N4148WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bjonnh/2024_emmg_workshop_midi repository on GitHub, at the commit this page was made from: the board is controller/controller/controller.kicad_pcb and its schematic controller/controller/controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).