

Sprocket
Put your circuits on your plastic bricks of choice
- Size
- 47 × 15 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 38
- Pads
- 153
- Tracks, vias
- 466, 67
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jan 2021
- Updated
- 22 Apr 2022
Overview
Sprocket is an open-source printed circuit board by jamesmunns, from the jamesmunns/brick-mount repository on GitHub. It is a 4-layer board of 47 × 15 mm with 35 parts on 38 nets, routed with 466 tracks and 67 vias.
It is built around the STM32G031G8U6, AP2210N-3.3TRG1 and B5819W, with the NX7002BKR among its other parts. Its parts include 7 capacitors, 7 resistors, 6 diodes, 5 connectors and 2 ICs. It belongs with the STM32 boards of this library.
Main components
4STM32G031G8U6
UFQFPN-28(4x4)-40℃~+85℃ 1.7V~3.6V 12bit 26 32 Bit 64KB 64MHz 8KB ARM Cortex-M0+ Built-in+External FLASH UFQFPN-28(4x4) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AP2210N-3.3TRG1
SOT-23-40℃~+125℃@(Tj) 1 13.2V 1uA 250mV@(300mA) 3.3V 300mA 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsB5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky DiodesNX7002BKR
SOT-23-55℃~+150℃ 1 N-channel 1nC@10V 2.1V 2.8Ω@10V 23.6pF 270mA 310mW 3pF 60V SOT-23 MOSFETs ROHSNexperiaMOSFETs
README
README.mdBrick Boards

Boards designed to be compatible with LEGO and other plastic building blocks.
There are KiCAD footprints for a variety of different brick arrangements in the parts folder. I've also included a number of personal projects using these footprints in the boards/ folder.
LICENSE
The contents of the parts/brick-4_9id-6_0od.pretty/ folder are licensed under a CC0 license.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R8 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C6, C7 |
| 3 | LED | Diode_SMD:D_0603_1608Metric | D4, D5, D6 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | Conn_01x02 | brick-4_9id-6_0od:brick-1x2 | MH1, MH2 |
| 2 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J4, J6 |
| 2 | Conn_01x04_MountingPin | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J5, J7 |
| 2 | SW_Push | Everything:K2-1808SN-A4SW-01 | SW1, SW2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4 |
| 2 | TC3838RGB | Everything:TC3838RGB | D2, D3 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | AP2210N-3.3TRG1 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | NX7002BKR | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SPROCKET-CONN | Everything:sprocket-pins | J1 |
| 1 | STM32G031G8U6 | footprints:STM32G031G8U6 | U1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
More from jamesmunns/brick-mount
12- 4 layers97 × 87 mm

- 2 layers97 × 99 mm

Proto quarter panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
188 parts40 - 2 layers95.5 × 127.5 mm

- 4 layers34 × 47.5 mm

- 2 layers97 × 95 mm

Proto half cables panel
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
116 parts40 - 4 layers15.5 × 47.5 mm

- 2 layers47 × 47 mm

- 2 layers63.5 × 95.5 mm

- 2 layers47 × 95 mm

- 2 layers79 × 47 mm

Black pill breakout
jamesmunns/brick-mount
Put your circuits on your plastic bricks of choice
27 parts40 - 2 layers47 × 31 mm

- 2 layers47.5 × 63.5 mm

Similar boards
- 2 layers47.4 × 44.4 mm

- 2 layers64 × 55.2 mm

- 2 layers35.5 × 35.3 mm

- 2 layers53.4 × 84.4 mm

PCB business cards
ExcessiveOverkill/PCB-business-cards
Everything needed to make your own persistence of vision business cards
70 parts3 - 4 layers49 × 34 mm

C92 decoder A1
slonket/c92-decoder
An MM1/MM2/Lenz decoder for classic Märklin locomotives and the pre-mfx digital systems.
93 partsCERN-OHL-S-2.0 - 2 layers38 × 44.6 mm

M3-V5
tomrodinger/servomotor
Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.
71 parts17MIT - 4 layers18.7 × 19.5 mm

- 2 layers45 × 29.4 mm
/ControlPanelSTM32QFN28/ControlPanelSTM32QFN28.kicad_pcb.jpg?size=s&soon)
Questions
How big is the Sprocket PCB?
It measures 47 × 15 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Sprocket use?
35 parts, built around the STM32G031G8U6, AP2210N-3.3TRG1, B5819W and NX7002BKR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sprocket KiCad files?
From the jamesmunns/brick-mount repository on GitHub, at the commit this page was made from: the board is boards/sprocket/sprocket.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sprocket design in my own project?
Its repository states no licence, so its author keeps all rights: ask jamesmunns before reusing the design.