
Chaac ng
alvarop/chaac
This is a work in progress for a wireless weather station project.

A portable Raspberry Pi Zero W2
PortaPi R1 is an open-source printed circuit board by JakeBoothy, from the JakeBoothy/PortaPi repository on GitHub. It is a 4-layer board of 184.3 × 131 mm with 199 parts on 259 nets, routed with 1,994 tracks and 489 vias.
It is built around the RP2040, PAM8302AADCR and BME680, with the PCAL6416AHF, TLV320AIC3101IRHBR and TPS61252DSG among its other parts. Its parts include 78 capacitors, 47 resistors, 16 ICs, 16 switches and 11 connectors. It belongs with the RP2040 boards of this library.
A portable Raspberry Pi Zero W2
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0603_1608Metric | C11, C23, C26, C28, C31, C32, C33, C34, C36, C38, C42, C44, C45, C46, C47, C50 +8 |
| 18 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C15, C16, C17, C19, C20, C21, C27, C29, C35, C37, C39, C40, C48 +2 |
| 18 | 20k | Resistor_SMD:R_0603_1608Metric | R12, R13, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R27, R28, R42, R43 +2 |
| 8 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8 |
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | C59, C60, C61, C62, C63, C64 |
| 6 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C12, C25, C30, C54, C81 |
| 6 | 22 | Capacitor_SMD:C_0402_1005Metric | R32, R33, R34, R35, R37, R38 |
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C57, C58, C65, C76, C77 |
| 4 | 100pF | Capacitor_SMD:C_0603_1608Metric | C7, C10, C18, C22 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R9, R25, R26, TH1 |
| 4 | 220pf | Capacitor_SMD:C_0603_1608Metric | C41, C43, C51, C52 |
| 4 | 5.1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R8, R10 |
| 4 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB2, FB3, FB4, FB5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 4 | SW_SPST | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx31-2LFS | SW13, SW14, SW15, SW16 |
| 4 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D5, D6, D7, D9 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R14, R40, R46 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C13, C14, C24 |
| 3 | TPS7A0533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U1, U4, U6 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R30, R31 |
| 2 | 1k | Capacitor_SMD:C_0402_1005Metric | R39, R41 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C66, C67 |
| 2 | 27pf | Capacitor_SMD:C_0402_1005Metric | C72, C73 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1, C9 |
| 2 | DF40HC3.0-30DP | DF40C-30DP:SOIC_0DP-0.4V51_HIR | J3, J9 |
| 2 | ESDA5V3SC5 | Package_TO_SOT_SMD:SOT-23-5 | D3, D4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 2 | PAM8302AAD | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U8, U10 |
| 2 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | SW10, SW11 |
| 2 | SpeakerOut | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | J6, J10 |
| 1 | 1.13k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1.18k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 1.5 A | Resistor_SMD:R_0603_1608Metric | F1 |
| 1 | 100m | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 120nF | Capacitor_SMD:C_0603_1608Metric | C70 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 1k | Capacitor_SMD:C_0603_1608Metric | R29 |
| 1 | 1uH | Inductor_SMD:L_Bourns-SRN4018 | L1 |
| 1 | 243k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 6.8nF | Capacitor_SMD:C_0603_1608Metric | C71 |
| 1 | 768k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | A | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | ABM3-12.000MHZ-D2Y-T | Crystal:Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 1 | AudioJack4 | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J7 |
| 1 | B | Button_Switch_THT:SW_PUSH_6mm | SW4 |
| 1 | BME680 | Package_LGA:Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering | U11 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U17 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P-B | SW12 |
| 1 | BQ24072RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U2 |
| 1 | Battery_Cell | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | BT1 |
| 1 | Conn_Coaxial_Small | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J11 |
| 1 | D | Button_Switch_THT:SW_PUSH_6mm | SW9 |
| 1 | DF40HC3.0-30DS-0.4V51 | DF40HC:CONN_30DS-0.4V51 | J8 |
| 1 | DF40HC4.0-30DS-0.4V51 | DF40HC:CONN_30DS-0.4V51 | J2 |
| 1 | DNF | Capacitor_SMD:C_0402_1005Metric | R36 |
| 1 | FPC 0.5mmP 18 Pin | Connector_FFC-FPC:TE_1-1734839-8_1x18-1MP_P0.5mm_Horizontal | J4 |
| 1 | FerriteBead_Small | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | L | Button_Switch_THT:SW_PUSH_6mm | SW6 |
| 1 | LTC2942 | Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm | U5 |
| 1 | PCAL6416AHF | Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm | U7 |
| 1 | R | Button_Switch_THT:SW_PUSH_6mm | SW7 |
| 1 | RAK3172 | RAK3172:RAK3172_RAK | U12 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U15 |
| 1 | Raspberry_Pi_2_3 | Module:Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles | J5 |
| 1 | SM351LT | Package_TO_SOT_SMD:SOT-23 | U13 |
| 1 | SW_Slide_DPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | TLV320AIC3101IRHBR | TI_TLV320AIC3101:RHB32_3P45X3P45 | U9 |
| 1 | TPS61252DSG | Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U3 |
| 1 | U | Button_Switch_THT:SW_PUSH_6mm | SW8 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U14 |
| 1 | X | Button_Switch_THT:SW_PUSH_6mm | SW3 |
| 1 | Y | Button_Switch_THT:SW_PUSH_6mm | SW5 |
The 197 most common of 199 parts.
It measures 184.3 × 131 mm and has 4 copper layers, 1 mm thick.
199 parts, built around the RP2040, PAM8302AADCR, BME680 and PCAL6416AHF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JakeBoothy/PortaPi repository on GitHub, at the commit this page was made from: the board is PortaPi_R1/PortaPi_R1.kicad_pcb and its schematic PortaPi_R1/PortaPi_R1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JakeBoothy before reusing the design.

alvarop/chaac
This is a work in progress for a wireless weather station project.

nathan-cannell/robotic_mice_dxarts
This repository documents the Robotic Mice project, an interactive art installation for the University of Washington's DXARTS program.

teapotlaboratories/bwlr3d
Teapot BWLR3D: Asset Tracker and Environmental Sensor with Solar Energy Harvesting




