4 layers121.9 × 44.4 mm
2 layers121.3 × 110 mm
FlowerBed
jacklpayne/FlowerBed1Development board for the Daisy Seed
- Size
- 121.3 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 50
- Pads
- 168
- Tracks, vias
- 226, 19
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 May 2026
- Updated
- 15 May 2026
Overview
FlowerBed is an open-source printed circuit board by jacklpayne, from the jacklpayne/FlowerBed repository on GitHub. It is a 2-layer board of 121.3 × 110 mm with 28 parts on 50 nets, routed with 226 tracks and 19 vias.
It is built around the PAM8302AASCR. Its parts include 8 switches, 6 connectors, 4 capacitors, 3 resistors and 1 IC.
Main components
1Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | SW_SPST | Button_Switch_THT:SW_PUSH-12mm | SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 |
| 4 | R_Potentiometer_US | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | POT0, POT1, POT2, POT3 |
| 2 | 1k | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 47uf | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | AudioJack3_SwitchTR | Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_Horizontal | J2, J3 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10K trim | Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical | VR1 |
| 1 | Conn_01x02 | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | J1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J5 |
| 1 | Electrosmith_Daisy_Seed_Rev4 | Module:Electrosmith_Daisy_Seed | A1 |
| 1 | PAM8302AASCR | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
Questions
How big is the FlowerBed PCB?
It measures 121.3 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FlowerBed use?
28 parts, built around the PAM8302AASCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FlowerBed KiCad files?
From the jacklpayne/FlowerBed repository on GitHub, at the commit this page was made from: the board is FlowerBed.kicad_pcb and its schematic FlowerBed.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FlowerBed design in my own project?
Its repository states no licence, so its author keeps all rights: ask jacklpayne before reusing the design.
Similar boards
- 4 layers25.3 × 35.1 mm
Agb hifi audio pcb
cajunpanda/gameboy-hifi-audio
A HiFi audio mod for various Game Boy models
66 parts25MIT - 2 layers81 × 55 mm
- 4 layers54.7 × 78.5 mm
DisplayModule PONSv71
MasaoC/GPS-TFT-Map_PONS
鳥人間コンテストに特化したGNSS誘導システム。人力飛行機のパイロットが使いやすいことを目標にした航法装置です。ハードとソフトをオープンソースで開発しています。
151 parts14MIT - 2 layers82.5 × 136.7 mm
Gameboy dmg
alxhoff/gameboy-dmg-pcb
PCB for Gameboy DMG with audio and GPIO expander to provide I2C interface to push buttons
95 parts4GPL-3.0 - 4 layers182 × 150 mm
- 2 layers58 × 44 mm
Button
birkenfeld/stm_button_rust
Using nightly Rust and cargo, just do a cargo build --release.
40 parts3 - 4 layers70 × 90 mm
