
IIT 5dof arm
izsoandras/IIT_5dof_robotarm
Controller board and software for an old 5 degree of freedom robotarm

Controller board and software for an old 5 degree of freedom robotarm
IIT 5dof arm IO is an open-source printed circuit board by izsoandras, from the izsoandras/IIT_5dof_robotarm repository on GitHub. It is a 2-layer board of 100 × 85 mm with 112 parts on 67 nets, routed with 471 tracks and 24 vias.
It is built around the ATMEGA328P-AU, MAX3232ID and BSS84, with the SMAJ12A, 1812L050PR and SMAJ5.0A among its other parts. Its parts include 35 resistors, 26 capacitors, 17 diodes, 14 switches and 6 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Foun an old 5 degree of freedom robotarm (Kalms&Mürb teach-robot) on my department. Decided to give it a new life. here is my progression.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R15, R16, R23, R24, R25, R26, R27, R28, R29, R31, R32, R33, R34, R35 +1 |
| 15 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 |
| 13 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R20 |
| 13 | LED | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D14 |
| 12 | SW_Push | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | SW1, SW2, SW3, SW4, SW5, SW6, SW9, SW10, SW11, SW12, SW13, SW14 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0.33uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C13, C14 |
| 3 | BSS84 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 160 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R19 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C9 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R21, R22 |
| 2 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2, J4 |
| 2 | SMAJ12A | Diode_SMD:D_SMA | D16, D17 |
| 1 | 0.047uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | 1812L050PR | IIT_5dof_arm_IO:1812L050PR__1.78mm_3.15mm_3.45mm | F1 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Buzzer | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | BZ1 |
| 1 | Conn_01x04 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x05 | Connector_Molex:Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_02x03_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D13 |
| 1 | DE9_Plug_MountingHoles | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J6 |
| 1 | LOGO | IIT_5dof_arm:IIT_logo_15x15mm | G*** |
| 1 | MAX3232 | Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm | U2 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA | D15 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_FSMSM | SW8 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW15 |

izsoandras/IIT_5dof_robotarm
Controller board and software for an old 5 degree of freedom robotarm



arihant-o/IEM-Electronics
GitHub repository for the electronics projects within IEM.





CodeByMika/technikerarbeit2026-hardwarepruefadapter
Im Schuljahr 2025/2026 wurde im Rahmen der Ausbildung zum staatlich geprüften Techniker diese Technikerarbeit in Zusammenarbeit mit der Gottlieb Daimler Schule 2 in Sindelfingen sowie der SOTEC GmbH & Co KG in…
It measures 100 × 85 mm and has 2 copper layers, 1.6 mm thick.
112 parts, built around the ATMEGA328P-AU, MAX3232ID, BSS84 and SMAJ12A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the izsoandras/IIT_5dof_robotarm repository on GitHub, at the commit this page was made from: the board is PCB/IIT_5dof_arm_IO/IIT_5dof_arm_IO.kicad_pcb and its schematic PCB/IIT_5dof_arm/IIT_5dof_arm.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask izsoandras before reusing the design.