itstoomuchbutter/edge_detector1Edge detector is an open-source printed circuit board by itstoomuchbutter, from the itstoomuchbutter/edge_detector repository on GitHub. It is a 2-layer board of 43 × 20 mm with 50 parts on 61 nets, routed with 530 tracks and 38 vias.
It is built around the ESP32-C3-MINI-1-N4, HX710C and CSD85301Q2, with the AP2112K-3.3, MCP73831-2ACI/OT and BAT54CDW among its other parts. Its parts include 19 resistors, 13 capacitors, 6 ICs, 3 switches and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100 | Resistor_SMD:R_0402_1005Metric | R5, R7, R9, R10, R20, R21 |
| 5 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C9, C10, C14, C15 |
| 5 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R8, R11, R12, R18 |
| 4 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C11 |
| 4 | 4k7 | Resistor_SMD:R_0402_1005Metric | R1, R13, R14, R15 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R16, R17 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C7, C8 |
| 2 | C544396 | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2, U6 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | A+ | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | A- | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | C134406 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D6 |
| 1 | C2286 | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | C2838502 | Espressif:ESP32-C3-MINI-1 | U5 |
| 1 | C424093 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | Deflate | Button_Switch_SMD:SW_SPST_PTS645 | SW2 |
| 1 | E+ | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4 |
| 1 | E- | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | HX710C | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | Mode | Button_Switch_SMD:SW_SPST_PTS645 | SW3 |
| 1 | Power | Connector_Molex:Molex_PicoBlade_53048-1210_1x12_P1.25mm_Horizontal | J1 |
| 1 | Program | Button_Switch_SMD:SW_SPST_PTS645 | SW1 |
| 1 | ~ | Sensor_Pressure:MPRLS0015PA0000SA | MPRLS1 |
XuanTrace/half-bridge-load-cells-board
Open-source half-bridge load cell PCB design featuring the HX710A/B/C ADC chip. Supports SMD with castellation (half-hole), pin headers, and XH2.45 4-pin connectors.
CoreElectronics/CE-Makerverse-Load-Cell-ADC-HX710C
This is the repo for the Core Electronics Makerverse Load Cell ADC.
ponderononon/IEMU_DevBoards
Kicad Schematic Files for the BASE and SENSOR Development Boards (Layout in Progress)
saihibbkaura/saihibb-kaura.github.io
This project implements the board recorded in the engineering portfolio: STM32WB55 MCU, USB-C power/data, single-cell LiPo charging, 3.3 V regulation, I2C environmental sensing, external SPI flash and BLE/RF access.
It measures 43 × 20 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the ESP32-C3-MINI-1-N4, HX710C, CSD85301Q2 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the itstoomuchbutter/edge_detector repository on GitHub, at the commit this page was made from: the board is edge_detector.kicad_pcb and its schematic edge_detector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask itstoomuchbutter before reusing the design.