2 layers66 × 16 mm
2 layers39.3 × 65 mm
Phone
istoocold/sage- Size
- 39.3 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 45
- Pads
- 88
- Tracks, vias
- 189, 10
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 15 Oct 2026
- Updated
- 25 Oct 2026
Overview
Phone is an open-source printed circuit board by istoocold, from the istoocold/sage repository on GitHub. It is a 2-layer board of 39.3 × 65 mm with 14 parts on 45 nets, routed with 189 tracks and 10 vias.
It is built around the TP1 and TPS1. Its parts include 4 switches, 1 resistor, 1 IC and 1 connector. It belongs with the ESP32 boards of this library.
Main components
2Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | A1 | solderwirepad_1_02_SMD:SolderWirePad_1x07_SMD_2x6mm | A1 |
| 1 | B_RAW | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_2x6mm | B_RAW1 |
| 1 | ESP32-38_pins | XIAO_ESP32C3:MODULE_ESP32_NODEMCU | U1 |
| 1 | J1 | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_2x6mm | J1 |
| 1 | M1 | solderwirepad_1_02_SMD:SolderWirePad_1x06_SMD_2x6mm | M1 |
| 1 | OLED | solderwirepad_1_02_SMD:SolderWirePad_1x07_SMD_2x6mm | OLED1 |
| 1 | PWR | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_2x6mm | PWR1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | RotaryEncoder_Switch | solderwirepad_1_02_SMD:SolderWirePad_1x05_SMD_2x6mm | SW4 |
| 1 | SW1 | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_2x6mm | SW1 |
| 1 | SW2 | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_2x6mm | SW2 |
| 1 | SW3 | solderwirepad_1_02_SMD:SolderWirePad_1x02_SMD_2x6mm | SW3 |
| 1 | TP1 | solderwirepad_1_02_SMD:SolderWirePad_1x04_SMD_2x6mm | TP1 |
| 1 | TPS1 | solderwirepad_1_02_SMD:SolderWirePad_1x03_SMD_2x6mm | TPS1 |
More from istoocold/sage
1Similar boards
- 4 layers75.5 × 62 mm
Bspd
chithigun23/ANUFS-BSPD-2026
ANUFS's BSPD for 2026 Formula SAE ICE Car. The goal of this project is to be AEC-Q100/Q101/Q200 compliant.
120 parts1 - 2 layers163 × 75.8 mm
- 4 layers58.9 × 48.4 mm
Apppd
chithigun23/ANUFS-APPPD
An update to the Accelerator Pedal Position Plausibility Device to remain compliant with the use of a paddle shift system.
103 parts - 2 layers114 × 56.6 mm
ProbeBoardPublicV5
novintic/FlukeEmu-FluCom
HW/SW solution for Fluke 9010 mainframe emulation
76 parts27GPL-2.0 - 2 layers60 × 100 mm
- 2 layers95 × 67 mm
1e3c0a280b22034a487261aa2451d276e8631e8a0f44761d6a49a571b81d7071
autonomous-ai/autonomous-circuit
Chat with AI, get a verified PCB and a fab packet you can order.
51 parts14MIT - 2 layers100 × 120 mm
Dcc station
cc90202/DCC-esp32
DCC command station for ESP32-C6 — NMRA-compliant model railroad controller in Rust
82 parts12 - 4 layers43 × 66 mm
Questions
How big is the Phone PCB?
It measures 39.3 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Phone use?
14 parts, built around the TP1 and TPS1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Phone KiCad files?
From the istoocold/sage repository on GitHub, at the commit this page was made from: the board is phone/phone.kicad_pcb and its schematic phone/button/button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Phone design in my own project?
Its repository states no licence, so its author keeps all rights: ask istoocold before reusing the design.