

ProbeBoardPublicV5
HW/SW solution for Fluke 9010 mainframe emulation
- Size
- 114 × 56.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 111
- Pads
- 306
- Tracks, vias
- 574, 45
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Apr 2022
- Updated
- 16 Feb 2025
Overview
ProbeBoardPublicV5 is an open-source printed circuit board by novintic, from the novintic/FlukeEmu-FluCom repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 114 × 56.6 mm with 76 parts on 111 nets, routed with 574 tracks and 45 vias.
It is built around the SN74LV1T34DBV, JFE2140D and BSS138, with the TP1 among its other parts. Its parts include 27 resistors, 18 capacitors, 6 ICs, 6 connectors and 4 transistors. It belongs with the RP2040 boards of this library.
Main components
4SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversJFE2140D
SOIC-8-55℃~+150℃ 1.5V 13pF 2 N-Channel 40V SOIC-8 JFETs ROHSTexas InstrumentsJFETsBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsTP1
-- Test leads ROHSFLUKEUncategorised
README
README.mdFlukeEmu-FluCom
A HW/SW solution for Fluke 9010 mainframe emulation
The Idea is to use a Raspberry Pi to run a Fluke 9010a emulator in software and interface with the hardware (pods) by means of an add on board/hat (basically to shift the levels and provide power to the pod). So far we have progressed from a proof of concept to a pretty solid and stable emulation.
The advantages of using an approach like this are many, amongst them:
- cheap Fluke 9010a mainframe replacement using modern technology and thereby adding stuff like network capability, wireless LAN, remote access/VNC, bluetooth etc ‚for free‘
- the interface board can supply all the power rails to the pod so only one 12V wall adapter is needed to power the RaspberryPi and the pods
- the whole setup is portable and compact, you could in theory put the whole thing inside your cabinet/UUT and comfortably use VNC to remote control the Fluke. You could also run the thing ‚headless‘ making it even smaller.
For further instruction on the fluCom board, please check: FlukeEmu-FluCom/fluCom/readme.md
For further instruction on the flukeEmuWx software, please check: FlukeEmu-FluCom/flukeEmuWx/readme.md
Credits
We would like to credit Adam Courchesne (@onecircuit) for coming up with the idea of a Fluke emulator and hardware combination and of course for being the first one to actually write one and make it available.
See also
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C53, C58, C59, C60, C61, C62, C71 |
| 6 | 1N4448 | Diode_SMD:D_SOD-123 | CR3, CR4, CR5, CR6, CR7, CR13 |
| 5 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R10, R11, R39 |
| 4 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R15, R16 |
| 4 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4, Q5 |
| 3 | 200R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22, R23, R41 |
| 2 | .001uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C54, C55 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 2.2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R30, R31 |
| 2 | 300R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 6.8uF 35V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | LM361 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U2, U3 |
| 2 | SN74LV1T34DBV | Package_TO_SOT_SMD:SOT-23-5 | U4, U6 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R52 |
| 1 | 100R(1%) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C3 |
| 1 | 10K? 5K? | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25 |
| 1 | 15K(1%) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R26 |
| 1 | 2-10pF | Capacitor_SMD:C_1210_3225Metric | C51 |
| 1 | 200R(1%) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
| 1 | 2040 Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U5 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32 |
| 1 | 22uF 15V Tant | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C56 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 4420R(1%) | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | 5-50pF | Capacitor_SMD:C_1210_3225Metric | C52 |
| 1 | 510R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R56 |
| 1 | 750R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R38 |
| 1 | 9010A Probe | Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J1 |
| 1 | Cap_Adj1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Cap_Adj2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Ext LED | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | FluCom3 | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP2 |
| 1 | JFE2140 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | JFET_IN | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP4 |
| 1 | LED GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | LED RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | MBR120(520?) | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | PULSE PH9084 | Transformer_SMD:Pulse_P0926NL | TR2 |
| 1 | Polyfuse | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | F1 |
| 1 | TP1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | TP8 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP8 |
| 1 | Trig Out | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J10 |
More from novintic/FlukeEmu-FluCom
1- 2 layers114 × 56.7 mm

Similar boards
- 6 layers150 × 100 mm

- 6 layers140 × 100 mm

- 4 layers160 × 100 mm

- 4 layers160 × 100 mm

LNA v1
Verdefluox/Eurocard_LNA
A general purpose AC/DC low noise preamplifier on Eurocard format PCB
178 partsMIT - 4 layers106 × 63.5 mm

- 4 layers81.2 × 81.2 mm

- 4 layers65 × 56 mm

I2S Hat
raptorlightning/I2S-Hat
An SPDIF Hat for the Raspberry Pi 2-X for SPDIF Communication
98 parts19GPL-3.0 - 4 layers165 × 43.5 mm

1U Backplane
kaysond/1U-DiskShelf
A 3D-Printable 1U Disk Shelf (4 bays) With Custom SATA Backplane
36 parts16
Questions
How big is the ProbeBoardPublicV5 PCB?
It measures 114 × 56.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ProbeBoardPublicV5 use?
76 parts, built around the SN74LV1T34DBV, JFE2140D, BSS138 and TP1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ProbeBoardPublicV5 KiCad files?
From the novintic/FlukeEmu-FluCom repository on GitHub, at the commit this page was made from: the board is ProbeBoard/KiCAD8/ProbeBoardPublic/ProbeBoardPublicV5.kicad_pcb and its schematic FluCom/KiCAD8/FluCom5.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ProbeBoardPublicV5 design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).