
LNA v1 BACKUP
Verdefluox/Eurocard_LNA
A general purpose AC/DC low noise preamplifier on Eurocard format PCB

A general purpose AC/DC low noise preamplifier on Eurocard format PCB
LNA v1 is an open-source printed circuit board by Verdefluox, from the Verdefluox/Eurocard_LNA repository on GitHub, published under the MIT licence. It is a 4-layer board of 160 × 100 mm with 178 parts on 93 nets, routed with 830 tracks and 317 vias.
It is built around the ADA4622-1ARZ, OPA828ID and DG419BDY-E3, with the JFE2140D, LT1763CDE and 74HC123D among its other parts. Its parts include 55 capacitors, 42 resistors, 23 ICs, 7 transistors and 7 switches.
A general purpose AC/DC low noise preamplifier on Eurocard format PCB
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115 +14 |
| 15 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16 |
| 14 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42 |
| 11 | TestPoint | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP27, TP29, TP30 |
| 8 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R6, R7, R8, R9, R10, R11 |
| 5 | DG419BDY | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7, U9, U10, U14, U17 |
| 5 | MMBT3904 | Package_TO_SOT_SMD:SOT-23W | Q1, Q2, Q3, Q4, Q5 |
| 4 | ADA4622-1ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8, U11, U12, U13 |
| 4 | Battery | LNA_v1:14500_Keystone53 | BT1, BT2, BT3, BT4 |
| 4 | C | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C22, C23, C24, C25 |
| 4 | JFE2140 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H1, H2, H3, H4 |
| 4 | TestPoint_2Pole | TestPoint:TestPoint_2Pads_Pitch5.08mm_Drill1.3mm | TP25, TP26, TP28, TP31 |
| 3 | SW_SPDT | LNA_v1:100AWSPXTXBXMXXX | SW2, SW3, SW4 |
| 2 | 1.69k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R21, R25 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28, R30 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C17 |
| 2 | 16.5k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22, R26 |
| 2 | 19.6k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20, R24 |
| 2 | 1Meg | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14, R17 |
| 2 | 1u | Capacitor_THT:C_Rect_L16.5mm_W7.3mm_P15.00mm_MKT | C2, C4 |
| 2 | 1u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13, C16 |
| 2 | 2.15k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R23 |
| 2 | 2.2u X7R | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C19, C21 |
| 2 | 22u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C15, C18 |
| 2 | 49.9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R18 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 2 | Conn_Coaxial | Connector_Coaxial:BNC_Amphenol_B6252HB-NPP3G-50_Horizontal | J1, J2 |
| 2 | G6KU-2 | Relay_SMD:Relay_DPDT_Omron_G6K-2F-Y | K1, K2 |
| 2 | LT1763 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U18, U19 |
| 2 | MMBF4117 | Package_TO_SOT_SMD:SOT-23 | Q6, Q7 |
| 2 | OPA991S | Package_TO_SOT_SMD:SOT-23-6 | U15, U16 |
| 2 | R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27, R29 |
| 2 | RF_Shield_One_Piece | RF_Shielding:Wuerth_36103305_30x30mm | J3, J4 |
| 2 | SW_DPDT_x2 | LNA_v1:100DPXTXBXMXXX | SW1, SW5 |
| 1 | 1.3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 100 | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C20 |
| 1 | 2.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
| 1 | 220p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | 22n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10 |
| 1 | 3.3n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11 |
| 1 | 300 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 33p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C7 |
| 1 | 6.8n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9 |
| 1 | 680p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 68n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | 68p | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 74HC123 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U22 |
| 1 | AD8033-ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | LP2985-5.0 | Package_TO_SOT_SMD:SOT-23-5 | U20 |
| 1 | OPA828 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | SN74LV123 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U21 |
| 1 | TLV3702 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U23 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |

Verdefluox/Eurocard_LNA
A general purpose AC/DC low noise preamplifier on Eurocard format PCB




novintic/FlukeEmu-FluCom
HW/SW solution for Fluke 9010 mainframe emulation

stefaweb/Q17-Amplifier
The Q17 is an error correction HIFI amplifier based on the QUAD405 current dumping principle.

philipturner/transimpedance-amplifier
Objective: Gather as much data as possible about the TIA sensor of an STM, using both theory and experiment.

lucask07/covg_clamp
kicad schematic and layout for COVG bath and guard clamps

It measures 160 × 100 mm and has 4 copper layers, 1.6 mm thick.
178 parts, built around the ADA4622-1ARZ, OPA828ID, DG419BDY-E3 and JFE2140D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Verdefluox/Eurocard_LNA repository on GitHub, at the commit this page was made from: the board is LNA_v1.kicad_pcb and its schematic LNA_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).