
Isw geode pcb
is-watering/isw_geode
This is a gaming macro pad designed primarily for playing Minecraft.

An orthoish keyboard with offset clusters.
Isw oozy pcb is an open-source printed circuit board by is-watering, from the is-watering/isw_oozy repository on GitHub, published under the MIT licence. It is a 2-layer board of 277 × 120 mm with 151 parts on 100 nets, routed with 1,097 tracks and 41 vias.
It is built around the VAL02 and VAL12. Its parts include 71 diodes, 58 switches, 1 IC and 1 connector. It belongs with the RP2040 and AVR (ATmega, ATtiny) boards of this library.
| Name | Material | Thickness | Notes |
|---|---|---|---|
| Switch plate A | - | 1.6mm or 2.0mm | |
| Switch plate B | - | 1.6mm or 2.0mm | |
| Bottom plate | - | 1.2mm - 2.0mm | |
| Cover plate for AZ1UBALL | FR4 | 1.0mm - 1.2mm | |
| Cover plate for StickPointV | - | 1.6mm or 2.0mm |

| Qty | Value | Footprint | References |
|---|---|---|---|
| 59 | D | kbd_Parts:Diode_TH_SMD | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +43 |
| 56 | SW_Push | kbd_SW:CherryMX_Hotswap_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +40 |
| 12 | LED_SK6812MINI-E | kbd_Parts:LED_SK6812MINI-E_BL | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12 |
| 2 | SW_Push | kbd_SW:CherryMX_Hotswap_1.5u | SW52, SW53 |
| 1 | LOGO | isw-logo:logomark_m | G*** |
| 1 | OLED-128x32 | isw-kbd:AZ1UBALL | J1 |
| 1 | ProMicro_RP2040 | isw-kbd:ProMicro_RP2040 | U1 |
| 1 | RotaryEncoder_Switch | BrownSugar_KBD:RotaryEncoder_EVQWGD001 | RE_SW1 |
| 1 | Val01 | kbd_Hole:m2_Spacer_Hole | Ref01 |
| 1 | Val02 | kbd_Hole:m2_Spacer_Hole | Ref02 |
| 1 | Val03 | kbd_Hole:m2_Spacer_Hole | Ref03 |
| 1 | Val04 | kbd_Hole:m2_Spacer_Hole | Ref04 |
| 1 | Val05 | kbd_Hole:m2_Spacer_Hole | Ref05 |
| 1 | Val06 | kbd_Hole:m2_Spacer_Hole | Ref06 |
| 1 | Val07 | kbd_Hole:m2_Spacer_Hole | Ref07 |
| 1 | Val08 | kbd_Hole:m2_Spacer_Hole | Ref08 |
| 1 | Val09 | kbd_Hole:m2_Spacer_Hole | Ref09 |
| 1 | Val10 | kbd_Hole:m2_Spacer_Hole | Ref10 |
| 1 | Val11 | kbd_Hole:m2_Spacer_Hole | Ref11 |
| 1 | Val12 | kbd_Hole:m2_Spacer_Hole | Ref12 |
| 1 | Val13 | kbd_Hole:m2_Spacer_Hole | Ref13 |
| 1 | Val14 | kbd_Hole:m2_Spacer_Hole | Ref14 |
| 1 | Val15 | kbd_Hole:m2_Spacer_Hole | Ref15 |
| 1 | Val16 | kbd_Hole:m2_Spacer_Hole | Ref16 |
| 1 | Val17 | kbd_Hole:m2_Spacer_Hole | Ref17 |
| 1 | Val18 | kbd_Hole:m2_Spacer_Hole | Ref18 |

is-watering/isw_geode
This is a gaming macro pad designed primarily for playing Minecraft.

PiTracLM/PiTrac
Launch monitor using low-cost raspberry pi and camera hardware to determine ball launch speed, angles and spin. See https://discord.gg/vGuyAAxXJH (permalink)


cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.




andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
It measures 277 × 120 mm and has 2 copper layers, 1.6 mm thick.
151 parts, built around the VAL02 and VAL12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the is-watering/isw_oozy repository on GitHub, at the commit this page was made from: the board is hardware/pcb/isw-oozy-pcb.kicad_pcb and its schematic hardware/pcb/isw-oozy-pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).