Ironman-007/Thermal_controlDue to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this.
TEMP ctrl is an open-source printed circuit board by Ironman-007, from the Ironman-007/Thermal_control repository on GitHub. It is a 2-layer board of 82.3 × 52.5 mm with 64 parts on 41 nets, routed with 191 tracks and 288 vias.
It is built around the LMC6484IM, AP2112K-3.3 and IRLZ44N, with the DMN2056U among its other parts. Its parts include 28 resistors, 15 capacitors, 11 connectors, 5 transistors and 4 ICs.
Due to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this. I made this for my personal usage, with 4 channels of RTD to measure temeprature and 4 channels of heater control.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 10kΩ | PCM_JLCPCB:R_1206 | R3, R4, R8, R9, R13, R14, R16, R17, R23, R24, R25, R26 |
| 9 | 10nF | PCM_JLCPCB:C_1206 | C6, C7, C8, C9, C11, C12, C13, C14, C15 |
| 6 | 100nF | PCM_JLCPCB:C_1206 | C1, C2, C3, C4, C5, C10 |
| 4 | 10Ω | PCM_JLCPCB:R_1206 | R19, R20, R21, R22 |
| 4 | 1kΩ | PCM_JLCPCB:R_1206 | R2, R7, R11, R12 |
| 4 | 4.99kΩ | PCM_JLCPCB:R_1206 | R5, R6, R27, R28 |
| 4 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q4, Q5 |
| 3 | 0Ω | PCM_JLCPCB:R_1206 | R1, R10, R15 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_4.0x4.0mm | J5, J6 |
| 2 | LMC6484 | PCM_JLCPCB:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U1, U4 |
| 1 | 102010388 | Mylib:MODULE_102010388 | U2 |
| 1 | 49.9kΩ | PCM_JLCPCB:R_1206 | R18 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | CH1 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | CH2 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J2 |
| 1 | CH3 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J3 |
| 1 | CH4 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J4 |
| 1 | DMN2056U | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Heater1 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J9 |
| 1 | Heater2 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J11 |
| 1 | Heater3 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J10 |
| 1 | Heater4 | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J12 |
| 1 | LCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | LOGO | LOGO | G*** |
It measures 82.3 × 52.5 mm and has 2 copper layers, 1.6 mm thick.
64 parts, built around the LMC6484IM, AP2112K-3.3, IRLZ44N and DMN2056U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ironman-007/Thermal_control repository on GitHub, at the commit this page was made from: the board is PCB/TEMP_ctrl/TEMP_ctrl.kicad_pcb and its schematic PCB/TEMP_ctrl/TEMP_ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ironman-007 before reusing the design.
Ironman-007/Thermal_control
Due to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this.
Biswajitpattanaik07/6_Axis_Robot_Controller
Axion is an open-source controller board for a 6-axis articulated robot arm. It is built around an STM32F103C8T6 and combines six servo outputs, six per-joint IMU inputs, and three ways to talk to the outside world…
SkullKill/Toy-Ikea-MicrowaveController-PCB
PCB for Microwave Controller for Ikea Kitchen DUKTIG
SkullKill/RDMA-PCB
Rpi Dead Man Alarm - PCB and 3D case - Occupancy Monitoring - Raspberry Pi hat
Ironman-007/PCBPT
This is a system that can help directly connect the schematic of the PCB design with test equipment (oscilloscope. etc,).
