Skip to the content
4 layersLamp, the printed circuit board in 3D

A bike lamp design

Copper layers
4
Thickness
1.6 mm
Parts
38
Nets
43
Pads
122
Tracks, vias
205, 25
Pours
6
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
12 Jul 2019
Updated
29 Jul 2025

Overview

Lamp is an open-source printed circuit board by bgamari, from the bgamari/lamp repository on GitHub. It is a 4-layer board with 38 parts on 43 nets, routed with 205 tracks and 25 vias.

It is built around the STM32G071GBU6, INA186A3IDDF and ZXGD3002E6TA, with the TPS7A0533PDBV, ERJ-3RQF1R0V and RL1220T-R010-J among its other parts. Its parts include 10 capacitors, 10 resistors, 7 connectors, 4 ICs and 3 diodes. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

12

Parts

38
QtyValueFootprintReferences
6Conn_01x01_FemaleConnector_Wire:SolderWirePad_1x01_Drill1mmJ1, J3, J4, J5, J6, J7
4100nCapacitor_SMD:C_0603_1608MetricC1, C9, C11, C16
31kResistor_SMD:R_0603_1608MetricR3, R8, R10
24.7uCapacitor_SMD:C_0603_1608MetricC4, C5
11Resistor_SMD:R_0603_1608MetricR15
1100Resistor_SMD:R_0603_1608MetricR7
1100kResistor_SMD:R_0603_1608MetricR14
110mResistor_SMD:R_0805_2012MetricR13
110nCapacitor_SMD:C_0603_1608MetricC12
110uCapacitor_Tantalum_SMD:CP_EIA-3528-12_Kemet-TC8
115VDiode_SMD:D_SOD-123D2
11uCapacitor_SMD:C_0603_1608MetricC17
12.2uInductor_SMD:L_7.3x7.3_H4.5L1
1220kResistor_SMD:R_0603_1608MetricR2
122uCapacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-WC14
1470kResistor_SMD:R_0603_1608MetricR4
1680kResistor_SMD:R_0603_1608MetricR1
1Conn_ARM_JTAG_SWD_10Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ8
1DDiode_SMD:D_SMAD3
1DMG2302UPackage_TO_SOT_SMD:SOT-23Q2
1GREENLED_SMD:LED_0603_1608MetricD1
1INA186A3Package_TO_SOT_SMD:SOT-23-8U2
1Jumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1SIA483DJ-T1-GE3‎Package_TO_SOT_SMD:Vishay_PowerPAK_SC70-6L_SingleQ1
1STM32G071GxUlamp:QFN-28_4.3x4.3_Pitch0.5mmU1
1TPS7A0533PDBVPackage_TO_SOT_SMD:SOT-23-5U5
1ZXGD3002E6Package_TO_SOT_SMD:SOT-23-6U4

More from bgamari/lamp

1
  • 4 layersLamp, the printed circuit board in 3D

    Lamp

    bgamari/lamp

    A bike lamp design

    47 parts1

Similar boards

  • 2 layers91.4 × 56.1 mmSmart Motor Driver, the printed circuit board in 3D

    Smart Motor Driver

    Mustafa614/Smart-Motor-Driver

    This Driver Works With 12v to 24v able to programming with stlink and pcb provides 2 connectors for uı and collecting the motor data's and controll's motor softness 20A peak

    76 parts
  • 4 layers50 × 45 mmMainControl, the printed circuit board in 3D

    MainControl

    Bergi84/GrowOMatic

    128 parts
  • 2 layers160 × 100 mmPm1p8V pm5V 5Vref 5Vlaser, the printed circuit board in 3D

    Pm1p8V pm5V 5Vref 5Vlaser

    scular-HCC/DualLaserPDHDriver

    Dual laster Pound-Dreaver-Hall driver setup. 1550 nm DFBs. Q=10^-5. Less than 20 GHz difference

    103 parts
  • 4 layers53.5 × 53.5 mmMiniTULPAR, the printed circuit board in 3D

    MiniTULPAR

    ErdemHtyl/Tulpar_Mini_FCB

    This project is under active development. The table below shows what is finished and what is still in progress:

    92 partsBSD-3-Clause
  • 6 layers200 × 170 mmMicrowave Beamer, the printed circuit board in 3D

    Microwave Beamer

    levisawatz/Microwave_beam_kicad

    474 parts
  • 4 layers45 × 45 mmRuuvitag gas, the printed circuit board in 3D

    Ruuvitag gas

    Sharki-66/womo-home-esp32

    Caravan Smart Home Display with esp32

    66 partsMIT
  • 4 layers30 × 21 mmReward port, the printed circuit board in 3D

    Reward port

    stef1029/trilab-floating-platform

    Head-fixed floating platform for studying sensory-guided spatial orienting in mice — hardware, firmware and control software.

    60 parts1

Questions

What parts does the Lamp use?

38 parts, built around the STM32G071GBU6, INA186A3IDDF, ZXGD3002E6TA and TPS7A0533PDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lamp KiCad files?

From the bgamari/lamp repository on GitHub, at the commit this page was made from: the board is board/v2/lamp.kicad_pcb and its schematic board/v2/lamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lamp design in my own project?

Its repository states no licence, so its author keeps all rights: ask bgamari before reusing the design.