Skip to the content
123

DMN2056U

Diodes Incorporated

20V, 4A, N-Channel Enhancement Mode MOSFET

Part id
diodes/DMN2056U
Category
Uncategorised
Package
SOT23-3
Pins
3
Used on
16 open-source boards

Overview

The DMN2056U is an uncategorised made by Diodes Incorporated in a SOT23-3 package with 3 pins. 20V, 4A, N-Channel Enhancement Mode MOSFET.

PCBKit's library has its KiCad symbol (Transistor_FET:DMN2056U, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-3, from KiCad's library), ready for a KiCad board. 16 open-source boards in 11 repositories on GitHub use it.

Symbol

123
Transistor_FET:DMN2056UFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23-3From KiCad's library

Pinout

3
The pins of the DMN2056U
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

16See all 16
  • 4 layers60 × 96 mmDMM Module, the printed circuit board in 3D

    DMM Module

    AryeIs/DMM_Module

    123 parts1
  • 2 layers75.6 × 65.2 mmRoProp, the printed circuit board in 3D

    RoProp

    Biswajitpattanaik07/6_Axis_Robot_Controller

    Axion is an open-source controller board for a 6-axis articulated robot arm. It is built around an STM32F103C8T6 and combines six servo outputs, six per-joint IMU inputs, and three ways to talk to the outside world…

    92 parts1
  • 2 layers65 × 56 mmToy Ikea MicrowaveController, the printed circuit board in 3D

    Toy Ikea MicrowaveController

    SkullKill/Toy-Ikea-MicrowaveController-PCB

    PCB for Microwave Controller for Ikea Kitchen DUKTIG

    73 parts1GPL-3.0
  • 2 layers65 × 56 mmRDMA, the printed circuit board in 3D

    RDMA

    SkullKill/RDMA-PCB

    Rpi Dead Man Alarm - PCB and 3D case - Occupancy Monitoring - Raspberry Pi hat

    92 partsGPL-3.0
  • 2 layers13 × 14.5 mmServo Signal V shifter, the printed circuit board in 3D

    Servo Signal V shifter

    Ironman-007/PCBPT

    This is a system that can help directly connect the schematic of the PCB design with test equipment (oscilloscope. etc,).

    5 parts11
  • 2 layers130.3 × 63.5 mmPower board, the printed circuit board in 3D

    Power board

    SCFormulaElectric/USC-Electrical-Systems

    29 parts9
  • 2 layers90 × 30 mmRML-26, the printed circuit board in 3D

    RML-26

    SCFormulaElectric/USC-Electrical-Systems

    31 parts9

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DMN2056U?

Yes. The symbol is Transistor_FET:DMN2056U and the footprint Package_TO_SOT_SMD:SOT-23-3, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMN2056U?

SOT23-3, with 3 pins. Its footprint is drawn on this page.

What can replace the DMN2056U?

Parts like it in the library: the JTD78L05CA by JTD, the ESD752DBZ by Texas Instruments, the MG78L05AT3 by Megain and the MCP111-300E/TT by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMN2056U?

16 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.