2 layers100 × 100 mm
Langpie
langpie/langpie
An Opensource Raspberry Pi Based Smart Car Project (ORPSC Project) - 树莓派开源智能车项目
80 parts48
2 layers40.6 × 17.8 mm
DRV8833-PCB-KiCad-DATA
- Size
- 40.6 × 17.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 22
- Pads
- 57
- Tracks, vias
- 122, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 28 Mar 2024
- Updated
- 5 Jun 2024
Overview
Drv8833 is an open-source printed circuit board by iotengineer22, from the iotengineer22/PCB-DRV8833-TEST repository on GitHub. It is a 2-layer board of 40.6 × 17.8 mm with 11 parts on 22 nets, routed with 122 tracks and 11 vias.
It is built around the DRV8833PWP. Its parts include 4 connectors, 3 capacitors, 3 resistors and 1 IC.
Main components
1README
README.mdPCB-DRV8833-TEST
DRV8833-PCB-KiCad-DATA
Schematics
Artwork
BOM-List
Motor-Driver-PCB --- Original-PCB
Motor-Driver-IC(U1) --- DRV8833PWPR
Resistor_SMD(R1) --- 0603_1608Metric_10k
Resistor_SMD(R2.R3) --- 0603_1608Metric_0 (or short-bar)
Capacitor_SMD(C1) --- 0603_1608Metric_2.2u
Capacitor_SMD(C2) --- 0603_1608Metric_10u
Capacitor_SMD(C3) --- 0603_1608Metric_0.1u
PinHeader_2x06(J1) -- 2x06_P2.54mm_Horizontal
PinHeader_1x02(J2,J3,J4) --- 1x02_P2.54mm_Vertical
PCB specifications
Zip the "drv8833-pcb" folder and send it to any PCB fabrication company (e.g., PCBGOGO).
The PCB specifications match the default settings of most fabrication companies. Just enter the dimensions and proceed with the order.
PCB Size: 17.78mm x 40.64mm
Layers: 2
Material: FR-4
FR4-TG: TG150-160
Thickness: 1.6mm
Min track/spacing: 6/6mil
Minimum hole size: 0.3mm
Solder mask: Green
Silkscreen: White
DEMO
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2, J3, J4 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | DRV8833PWP | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U1 |
Questions
How big is the Drv8833 PCB?
It measures 40.6 × 17.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Drv8833 use?
11 parts, built around the DRV8833PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drv8833 KiCad files?
From the iotengineer22/PCB-DRV8833-TEST repository on GitHub, at the commit this page was made from: the board is drv8833-pcb/drv8833.kicad_pcb and its schematic drv8833-pcb/drv8833.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drv8833 design in my own project?
Its repository states no licence, so its author keeps all rights: ask iotengineer22 before reusing the design.
Similar boards
- 4 layers110 × 50 mm
OpenHand v1
AleksaHeler/OpenHand
Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics
214 parts13MIT - 2 layers70 × 90 mm
- 4 layers117 × 107 mm
Mainboard dual battery
shurik179/yozh
Small robot based on Pololu's Zumo chassis but programmable in CircuitPython
121 parts8MIT - 4 layers29.9 × 32 mm
Models heart rev1.1
KushlaVR/models-heart
Можливості: Керування через WIFI з телефона або ПК 5 незалежних каналів (світлодіоди/сервомотори) 1 Н-міст для підключення мотора (піковий струм до 3А) Вмонтована BMS 1S та контроллер заряду Li-Ion акумулятора з…
106 parts7GPL-3.0 - 2 layers200 × 100 mm
Mobo
opulo-inc/lumenpnp-archive
This repository is a public archive of the LumenPnP Pick and Place (formerly Index) source material from the beginning in mid-2020 until May 2022. The current source can be found at https://github.com/opulo-inc/lumenpnp
88 parts6GPL-3.0 - 4 layers91.2 × 100.3 mm
- 4 layers66 × 83.1 mm
Zumo PiZero
wallComputer/PiZumo_Robot
Git Folder to share hardware and software files for PiZumo Robot.
117 parts3GPL-2.0