2 layers22.9 × 50.8 mm
Potentiostat featherwing
iorodeo/rodeostat_featherwing
Design files for the Rodeostat FeatherWing
20 parts4CC-BY-4.0
2 layers22.9 × 50.8 mm
Potentiostat featherwing
iorodeo/rodeostat_featherwing4Design files for the Rodeostat FeatherWing
- Size
- 22.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 37
- Pads
- 88
- Tracks, vias
- 140, 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jun 2020
- Updated
- 29 May 2023
Overview
Potentiostat featherwing is an open-source printed circuit board by iorodeo, from the iorodeo/rodeostat_featherwing repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 22.9 × 50.8 mm with 20 parts on 37 nets, routed with 140 tracks and 5 vias.
It is built around the MCP6004-E/P. Its parts include 5 capacitors, 5 resistors, 3 ICs and 3 connectors.
Main components
1README
README.mdIO Rodeo Potentiostat Feather Wing
Hardware design for IO Rodeo's Rodeostat Featherwing.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2, JP3, JP4 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4 |
| 2 | 10K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5 |
| 1 | 16.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | 56nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | ADG702 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |
| 1 | Screw_Terminal_01x03 | OST_SCREW_TERM_3:CONNBLOCK3 | J1 |
| 1 | feather_wing | feather_wing:feather_wing | U1 |
More from iorodeo/rodeostat_featherwing
2- 2 layers22.9 × 50.8 mm
Potentiostat featherwing
iorodeo/rodeostat_featherwing
Design files for the Rodeostat FeatherWing
16 parts4CC-BY-4.0
Similar boards
- 4 layers70.8 × 108 mm
- 4 layers60 × 94 mm
DaisySeedPedal125b
bkshepherd/DaisySeedProjects
A collection of hardware and software projects based around the Electro-Smith Daisy Seed
80 parts559MIT - 2 layers75 × 100 mm
Phased
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
77 parts530 - 2 layers66 × 99 mm
Nucleo32TNC
mobilinkd/NucleoTNC
The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3.
54 parts110GPL-3.0 - 2 layers171.5 × 106.7 mm
Sequencer
westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files
435 parts110 - 2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers29 × 20.9 mm
Wideband controller
mck1117/wideband
The firmware/boards directory contains configuration for each board this firmware supports.
60 parts81MIT - 2 layers248.9 × 120.7 mm
16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76
Questions
How big is the Potentiostat featherwing PCB?
It measures 22.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Potentiostat featherwing use?
20 parts, built around the MCP6004-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Potentiostat featherwing KiCad files?
From the iorodeo/rodeostat_featherwing repository on GitHub, at the commit this page was made from: the board is v0p2/potentiostat_featherwing.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Potentiostat featherwing design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).