

InspireFly EPS
inspireFly's custom EPS made for development of an open CubeSat architecture.
- Size
- 88 × 94.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 126
- Pads
- 438
- Tracks, vias
- 671, 89
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 Mar 2025
- Updated
- 1 Nov 2026
Overview
InspireFly EPS is an open-source printed circuit board by inspireFly-VT, from the inspireFly-VT/inspireFly-EPS repository on GitHub. It is a 4-layer board of 88 × 94.5 mm with 123 parts on 126 nets, routed with 671 tracks and 89 vias.
It is built around the STM32U575RIT6, TPS63070RNMR and MAX77504AAFC+T, with the BQ25750RRVR, BK-18650-PC4 and SDT5A60SA among its other parts. Its parts include 50 capacitors, 32 resistors, 9 transistors, 7 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
7STM32U575RIT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 160MHz 2MB 32 Bit 51 784KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)TPS63070RNMR
VQFN-15-HR(2.5x3)-40℃~+125℃@(TJ) 1 2.4MHz 2.5V~9V 2A 2V~16V 50uA Adjustable Buck-Boost Buck-Boost Built-in Yes VQFN-15-HR(2.5x3) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMAX77504AAFC+T
FC2QFN-12(2.5x2.5)-40℃~+125℃@(TA) 1 1.5MHz 10uA 2.6V~14V 3A 600mV~6V Adjustable Buck Buck Built-in Yes FC2QFN-12(2.5x2.5) DC-DC Converters ROHSMaxim Integrated (Analog Devices)DC-DC ConvertersBQ25750RRVR
VQFN-36-EP(6x5)Battery ManagementTexas InstrumentsBK-18650-PC4
插件插件 Button And Strip Battery Connector ROHSMPDButton And Strip Battery ConnectorSDT5A60SA
SMA-55℃~+150℃ 1 Independent 460mV@5A 500uA@60V 5A 60A 60V SMA Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesSQJ123ELP-T1_GE3
PowerPAK-SO-8-55℃~+175℃ 1 P-Channel 1.5V 11.68nF 12V 180nC@4.5V 238A 3.982nF 375W 4.443nF 6.4mΩ@2.5V P-Channel PowerPAK-SO-8 MOSFETs ROHSVishay IntertechnologyMOSFETs
README
README.mdinspireFly-EPS
inspireFly's custom EPS made for development of an open CubeSat architecture.
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3, C4, C5, C8, C9, C14, C18, C19, C24, C25, C27, C29, C39, C46 |
| 12 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31, C34, C35, C36, C40, C41, C42, C43, C47, C48, C49, C50 |
| 8 | SQJA62EP-T1_GE3 | inspireFly-EPS-footprints:TRANS_SQJA62EP-T1_GE3 | Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 6 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R6, R7, R22, R24 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21, R33, R34, R35, R36 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30, C37, C38, C44, C45 |
| 4 | 40k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R27, R28, R30 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C21, C22 |
| 3 | 5m | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R5, R16 |
| 2 | 1.5uH | inspireFly-EPS-footprints:WE-MAPI_4020 | L2, L3 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C11 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R18, R19 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C26, C51 |
| 2 | 2.2uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13, C23 |
| 2 | 2.2uH | inspireFly-EPS-footprints:WE-MXGI_4020 | L1, L4 |
| 2 | 200k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8, R32 |
| 2 | 210k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R29, R31 |
| 2 | 47nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C15, C16 |
| 2 | BK-18650-PC4 | inspireFly-EPS-footprints:BAT_BK-18650-PC4 | BT1, BT2 |
| 2 | DFLS130L-7 | inspireFly-EPS-footprints:DFLS130L7 | D4, D5 |
| 2 | SW_Push | inspireFly-EPS-footprints:SW_PTS810_SJM_250_SMTR_LFS | SW1, SW2 |
| 2 | TPS63070RNMR | inspireFly-EPS-footprints:VREG_TPS63070RNMR | U8, U9 |
| 1 | +3V | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | +9V | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 115k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R25 |
| 1 | 12.5k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 120 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | TR1 |
| 1 | 180k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R26 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7 |
| 1 | 2 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C33 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C32 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R20 |
| 1 | 44.8k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C20 |
| 1 | 470nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | 47uF | inspireFly-EPS-footprints:CAP_EEEFN1J470L | C17 |
| 1 | BAT_ENABLE | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | BQ25750RRVR | inspireFly-EPS-footprints:VQFN36_RRV_TEX | U2 |
| 1 | Conn_01x02_Pin | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Crystal_GND2 | inspireFly-EPS-footprints:XTAL_TSX-3225_16.0000MF18X-AC0 | Y1 |
| 1 | DRV_SUP | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | INA180A3IDBVT | inspireFly-EPS-footprints:SOT95P280X145-5N | U6 |
| 1 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | LOGO | inspireFly-EPS-footprints:inspireFly_Logo_long | G*** |
| 1 | MAX77504AAFC+T | inspireFly-EPS-footprints:21-100406_F122A2F&plus_2_MXM | U4 |
| 1 | SDT5A60SA | inspireFly-EPS-footprints:SDT5A60SA13 | D2 |
| 1 | SQJ123ELP-T1_GE3 | inspireFly-EPS-footprints:TRANS_SQJA62EP-T1_GE3 | Q1 |
| 1 | STM32U575RIT6 | inspireFly-EPS-footprints:LQFP64-10x10mm_STM | U1 |
| 1 | TCAN332DCNR | Package_TO_SOT_SMD:SOT-23-8 | U3 |
| 1 | USB4085-GF-A_REVB | inspireFly-EPS-footprints:GCT_USB4085-GF-A_REVB | J1 |
| 1 | V_BAT | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | V_COMBINED | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | V_PROTECTED | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
Similar boards
- 2 layers25 × 18 mm

- 6 layers48 × 36 mm

Tinyml platforms
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
74 parts8MIT - 4 layers65.1 × 70.2 mm

Standalone BQ25750 charger
loubnayesref/TI-s-BQ25750-Standalone-Charger
A kicad project for a charging module for a 3s of 4.2V li-ion battries, Based on TI's BQ25750 IC
67 parts - 6 layers80 × 67 mm

- 2 layers103.5 × 41.4 mm

- 2 layers80 × 80 mm

Kubisat power v2
gredzikk/kubisat
Hardware and software of cubesat model for engineering thesis
82 parts2MIT - 2 layers54 × 100 mm

Chatter charger
Racer159/chatter-charger
A LiIon/LiFePo/NiMH Charger Backpack for the CircuitMess Chatter v2
30 parts1 - 2 layers204 × 78 mm

Questions
How big is the InspireFly EPS PCB?
It measures 88 × 94.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the InspireFly EPS use?
123 parts, built around the STM32U575RIT6, TPS63070RNMR, MAX77504AAFC+T and BQ25750RRVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the InspireFly EPS KiCad files?
From the inspireFly-VT/inspireFly-EPS repository on GitHub, at the commit this page was made from: the board is inspireFly-EPS.kicad_pcb and its schematic inspireFly-EPS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the InspireFly EPS design in my own project?
Its repository states no licence, so its author keeps all rights: ask inspireFly-VT before reusing the design.