Skip to the content
6 layers80 × 67 mmLITHIUM BOARD, the printed circuit board in 3D
Size
80 × 67 mm
Copper layers
6
Thickness
1.63 mm
Parts
124
Nets
129
Pads
450
Tracks, vias
560, 599
Pours
69
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 May 2026
Updated
24 Jul 2026

Overview

LITHIUM BOARD is an open-source printed circuit board by tommy2002t, from the tommy2002t/LITHIUM_BOARD repository on GitHub. It is a 6-layer board of 80 × 67 mm with 124 parts on 129 nets, routed with 560 tracks and 599 vias.

It is built around the STM32G0B1CET6N, BQ25750RRVR and BQ7694204PFBR, with the CDBMT2100-HF, XT30PW-M and ACT45B-101-2P-TL003 among its other parts. Its parts include 43 resistors, 42 capacitors, 9 transistors, 7 diodes and 7 connectors. It belongs with the STM32 boards of this library.

Main components

12

README

README.md

LITHIUM_BOARD

LITHIUM_BOARD

Parts

124
QtyValueFootprintReferences
1210kRC0603FR-0710KL:RESC1608X55NR12, R15, R16, R17, R18, R22, R26, R28, R32, R33, R35, R43
8LOGOLOGOG***, G***, G***, G***, G***, G***, G***, G***
8SIR870ADP-T1-GE3SIR870ADP-T1-GE3:POWERPAK-SO-8Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8
60.1uFCC0603KRX7R9BB104:CAPC1608X90NC4, C5, C15, C21, C27, C28
64.7uFUMJ325AB7475KMHP:CAPC3225X280NC11, C12, C14, C16, C17, C31
4100nF [HV]C0603C104K1RACAUTO:CAPC1608X95NC2, C3, C20, C29
4100ΩRC0603FR-07100RL:RESC1608X55NR42, R44, R49, R50
410ΩRC0603FR-0710RL:RESC1608X55NR2, R3, R5, R9
41uFC2012X7R1H105K125AB:CAPC2012X145NC26, C36, C40, C42
4220nFC0805C224K5RACTU:C0805C37, C38, C43, C44
44.7uF [HV]KAM32LR72A475KU:CAPC3225X94NC18, C19, C22, C30
31kRC0603FR-071KL:RESC1608X55NR24, R31, R34
20.1μFCC0603KRX7R9BB104:CAPC1608X90NC10, C13
2100kRC0603FR-07100KL:RESC1608X55NR8, R19
21N4148WQ-7-F1N4148WQ-7-F:SOD3716X145ND3, D4
22.2uF [HV]CL31B225KCHSNNE:CAPC3216X180NC1, C7
22ΩRC0603FR-072RL:RESC1608X55NR4, R27
24.7kRC0603FR-074K7L:RESC1608X55NR13, R14
260R4ERJ-2RKF60R4X:ERJ2RKD1004XR29, R30
2CDBMT2100-HFCDBMT2100-HF:SODFL3516X100ND2, D5
2XT30PW-MXT30PW-M:XT30PWMJ1, J3
10.47μFC0805X474K5RECAUTO:C0805C9
1100nFGRM155R71H104KE14J:GRM15xC25
1100pFC0603C101J5GACTU:CAPC1608X87NC35
1100ΩRC0603FR-07100KL:RESC1608X55NR41
110MΩRC0603FR-0710ML:RESC1608X55NR46
110uHSRP1038A-100M:INDPM110100X400NL1
1150pFC0603C151J5GACTU:CAPC1608X87NC39
1150uFEEH-ZL1E151P:EEEHP1H4R7PC8
1150ΩRC0603FR-07150RL:RESC1608X55NR47
11MΩVT1206BRD071ML:RESC3116X65NR6
12.2uFC1206C225K5RACTU:C1206C45
122nFC0603C223K5RACTU:C0603C41
1249kΩRT0603BRD07249KL:RESC1608X55NR11
12mΩPMR18EZPFV2L00:RESC3216X59NR1
130.1kRC0603FR-0730K1L:RESC1608X55NR21
134.8kRC0603FR-0734K8L:RESC1608X55NR23
135.2kΩRT0603BRD0735K2L:RESC1608X55NR25
1390uFEEE-TP1K391V:EEEFK0J682AVC23
1470nF [HV]CGA5L2X7R2A474K160AA:CAPC3216X190NC6
14n7GRM188R72A472KA01D:CAPC1608X90NC24
15.23kRC0603FR-075K23L:RESC1608X55NR20
15mΩPMR100HZPFU5L00:RESC6432X67NR7
180.6kRC0603FR-0780K6L:RESC1608X55NR10
1ACT45B-101-2P-TL003ACT45B-101-2P-TL003:ACT45B1012PTL003FL1
1BQ25750RRVRBQ25750RRVR:QFN50P500X600X100-37N-DIC1
1BQ7694204PFBRBQ7694204PFBR:QFP50P900X900X120-48NIC6
1Conn_01x04Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ7
1Conn_01x06Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_VerticalJ6
1ESDCAN24-2BLYESDCAN24-2BLY:SOT95P255X125-3ND1
1LTST-C190KGKTLTST-C190KGKT:LEDC1608X80NLED1
1LTST-C190KRKTLTST-C190KRKT:LEDC1608X80NLED2
1MCP1792T-3302H_DBMCP1792T-3302H_DB:SOT230P700X180-4NIC2
1MMBT5551LT1GMMBT5551LT1G:SOT96P237X111-3NQ10
1S3B-XH-SM4-TB_LF__SN_S3B-XH-SM4-TB_LF__SN_:S3BXHSM4TBLFSNJ4
1STM32G0B1CET6NSTM32G0B1CET6N:QFP50P900X900X160-48NIC4
1SZBZX84C15LT3GSZBZX84C15LT3G:SOT96P237X111-3NZ1
1TCAN3414DDFRTCAN3414DDFR:INA190A2NDDFREPIC3
1TSW-105-07-G-STSW-105-XX-YY-S:TSW-105-XX-YY-SJ5
1XT30PW-FXT30PW-F:XT30PWFJ2

Similar boards

  • 2 layers40 × 30 mmAI KiCad Test, the printed circuit board in 3D

    AI KiCad Test

    ayberktarcin/ai-pcb-lab

    AI-assisted PCB development workspace using GPT, Claude, and other AI tools for schematic design, component selection, KiCad workflows, PCB layout, verification, and hardware engineering experiments.

    26 parts
  • 4 layers88 × 94.5 mmInspireFly EPS, the printed circuit board in 3D

    InspireFly EPS

    inspireFly-VT/inspireFly-EPS

    inspireFly's custom EPS made for development of an open CubeSat architecture.

    123 parts
  • 4 layers65.1 × 70.2 mmStandalone BQ25750 charger, the printed circuit board in 3D

    Standalone BQ25750 charger

    loubnayesref/TI-s-BQ25750-Standalone-Charger

    A kicad project for a charging module for a 3s of 4.2V li-ion battries, Based on TI's BQ25750 IC

    67 parts
  • 4 layers62 × 50 mmBattery monitor rev a, the printed circuit board in 3D

    Battery monitor rev a

    bogdan-kovalchuk/esp32-battery-charging-monitoring

    An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.

    66 partsMIT
  • 2 layers78 × 42.4 mmAnti tartre, the printed circuit board in 3D

    Anti tartre

    FredM67/Misc-Projects

    Some projects around PIC-microcontrollers

    38 partsCC-BY-4.0
  • 4 layers38.1 × 66 mmBGeigieScint, the printed circuit board in 3D

    BGeigieScint

    Safecast/bGeigieScint

    The board features an integrated boost converter + linear regulator topology for SiPM bias generation:

    100 parts2
  • 4 layers100 × 75 mmESC rev01 1, the printed circuit board in 3D

    ESC rev01 1

    irkenk8/PCBdesign_git

    181 parts
  • 6 layers58.4 × 156.2 mmLAUNCHXL F280049C KICAD, the printed circuit board in 3D

    LAUNCHXL F280049C KICAD

    MiniNugen/Custom_Inverter_Hardware

    PCBProjectNameREV1.PrjPCB | Source Documents | | PCBProjectNameREV1.SchDOC | | PCBProjectNameREV1.PcbDOC | | BOM | Settings | Libraries

    237 parts1

Questions

How big is the LITHIUM BOARD PCB?

It measures 80 × 67 mm and has 6 copper layers, 1.63 mm thick.

What parts does the LITHIUM BOARD use?

124 parts, built around the STM32G0B1CET6N, BQ25750RRVR, BQ7694204PFBR and CDBMT2100-HF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LITHIUM BOARD KiCad files?

From the tommy2002t/LITHIUM_BOARD repository on GitHub, at the commit this page was made from: the board is Lithium_Board.kicad_pcb and its schematic CANBUS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LITHIUM BOARD design in my own project?

Its repository states no licence, so its author keeps all rights: ask tommy2002t before reusing the design.