Skip to the content
2 layers40 × 30 mmAI KiCad Test, the printed circuit board in 3D

AI-assisted PCB development workspace using GPT, Claude, and other AI tools for schematic design, component selection, KiCad workflows, PCB layout, verification, and hardware engineering experiments.

Size
40 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
45
Pads
107
Tracks, vias
130, 32
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Oct 2026
Updated
9 Oct 2026

Overview

AI KiCad Test is an open-source printed circuit board by ayberktarcin, from the ayberktarcin/ai-pcb-lab repository on GitHub. It is a 2-layer board of 40 × 30 mm with 26 parts on 45 nets, routed with 130 tracks and 32 vias.

It is built around the STM32G031K8T6, TMP102AIDRLR(UMW) and TLV75533PDBVR-MS, with the RC0603FR-071KL, LTST-C190KRKT and TSW-105-07-G-S among its other parts. Its parts include 7 resistors, 6 capacitors, 3 ICs, 2 diodes and 2 connectors. It belongs with the STM32 boards of this library.

Main components

7

Parts

26
QtyValueFootprintReferences
34.7k 1%Resistor_SMD:R_0603_1608MetricR3, R4, R7
2100n / 16VCapacitor_SMD:C_0603_1608MetricC3, C5
21u / 16VCapacitor_SMD:C_0603_1608MetricC1, C2
25.1k 1%Resistor_SMD:R_0603_1608MetricR1, R2
1+3V3TestPoint:TestPoint_Pad_D1.5mmTP2
110n / 50VCapacitor_SMD:C_0603_1608MetricC6
11kResistor_SMD:R_0603_1608MetricR5
11k (DNP)Resistor_SMD:R_0603_1608MetricR6
14.7u / 6.3VCapacitor_SMD:C_0603_1608MetricC4
1GNDTestPoint:TestPoint_Pad_D1.5mmTP3
1I2C1_SCLTestPoint:TestPoint_Pad_D1.5mmTP4
1I2C1_SDATestPoint:TestPoint_Pad_D1.5mmTP5
1REDLED_SMD:LED_0603_1608MetricD1
1RED (DNP)LED_SMD:LED_0603_1608MetricD2
1RESETButton_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFSSW1
1STM32G031K8T6Package_QFP:LQFP-32_7x7mm_P0.8mmU1
1SWD 1x5Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1TLV75533PDBVRPackage_TO_SOT_SMD:SOT-23-5U3
1TMP102AIDRLRPackage_TO_SOT_SMD:SOT-563U2
1USB4105-GF-AConnector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_HorizontalJ1
1USB_5VTestPoint:TestPoint_Pad_D1.5mmTP1

Similar boards

  • 4 layers100 × 100 mmFarmMesh Node, the printed circuit board in 3D

    FarmMesh Node

    chinawrj/FarmMesh-Node

    Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.

    164 parts
  • 6 layers80 × 67 mmLITHIUM BOARD, the printed circuit board in 3D

    LITHIUM BOARD

    tommy2002t/LITHIUM_BOARD

    124 parts
  • 4 layers65 × 56 mmCanary pwr, the printed circuit board in 3D

    Canary pwr

    danbrunski/canary

    Four 25 F cells in series for CANary-PWR's LTC3350 hold-up, on a lead (design record: docs/CANary-PWR-Spec.md §P4). The board has no active parts: four cells, an NTC, two Kelvin net ties and a Micro-Fit 2 × 5 header.

    132 parts
  • 4 layers61.3 × 44.1 mmAt86rf215-design block, the printed circuit board in 3D

    At86rf215-design block

    oresat/oresat-kicad

    All things KiCAD for OreSat; libraries, tools, settings, etc.

    80 parts6
  • 4 layers85.9 × 85.9 mmPd1180-epr r0.3, the printed circuit board in 3D

    Pd1180-epr r0.3

    techmannih/pd1180-epr

    PD1180-EPR — NEMA 34 Smart Motor-Mounted Stepper Controller with USB-C PD 3.1 EPR

    277 parts
  • 4 layers140 × 70 mmSensor board, the printed circuit board in 3D

    Sensor board

    TrendBit/SMBR-hardware

    Design file for SMBR hardware modules in KiCAD.

    258 partsGPL-3.0
  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 4 layers144 × 112 mmQuadcuber, the printed circuit board in 3D

    Quadcuber

    gonewx/quadcuber

    本目录是 A1 电子源目录。打开 quadcuber.kicadpro,包含原生可编辑原理图和四层 PCB、本地符号/封装库。本设计为单块PCB,RP2040、QSPI Flash、晶振、USB-C、驱动和电源均直接焊接在板上;A0的Pico H插装已移除。马达使用EV3裸插座。接线定义仍从 ../wiring/spec.py 导入,固件未改动,也没有把 R/L 固件描述成已支持四臂控制。

    200 parts

Questions

How big is the AI KiCad Test PCB?

It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AI KiCad Test use?

26 parts, built around the STM32G031K8T6, TMP102AIDRLR(UMW), TLV75533PDBVR-MS and RC0603FR-071KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AI KiCad Test KiCad files?

From the ayberktarcin/ai-pcb-lab repository on GitHub, at the commit this page was made from: the board is AI_KiCad_Test/kicad/AI_KiCad_Test.kicad_pcb and its schematic AI_KiCad_Test/kicad/AI_KiCad_Test.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AI KiCad Test design in my own project?

Its repository states no licence, so its author keeps all rights: ask ayberktarcin before reusing the design.