
InspireFly EPS
inspireFly-VT/inspireFly-EPS
inspireFly's custom EPS made for development of an open CubeSat architecture.
Diodes IncorporatedExtended
-55℃~+150℃ 1 Independent 460mV@5A 500uA@60V 5A 60A 60V SMA Schottky Diodes ROHS
The SDT5A60SA is a schottky Diode made by Diodes Incorporated in a SMA package with 2 pins. -55℃~+150℃ 1 Independent 460mV@5A 500uA@60V 5A 60A 60V SMA Schottky Diodes ROHS.
PCBKit's library has its KiCad symbol (Device:D_Schottky, from KiCad's library) and its footprint (Diode_SMD:D_SMA, from KiCad's library), ready for a KiCad board. 5,564 are in stock at JLCPCB (part C3024223). 2 open-source boards in 2 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| VRRM VRRM | TA = +25°C | max 60 V | 1 |
| IO IO | TA = +25°C | max 5 A | 1 |
| VF(MAX) VF | TA = +25°C | max 0.52 V | 1 |
| IR(MAX) IR | TA = +25°C | max 0.5 mA | 1 |
| Peak Repetitive Reverse Voltage VRRM | TA = +25°C, unless otherwise specified | max 60 V | 2 |
| Working Peak Reverse Voltage VRWM | TA = +25°C, unless otherwise specified | max 60 V | 2 |
| DC Blocking Voltage VRM | TA = +25°C, unless otherwise specified | max 60 V | 2 |
| Average Rectified Output Current IO | TA = +25°C; single phase, half wave, 60Hz, resistive or inductive load; for capacitive load, derate current by 20% | max 5 A | 2 |
| Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM | TA = +25°C | max 60 A | 2 |
| Thermal Resistance Junction to Ambient (Note 6) RJA | FR-4 substrate, 1"*1", 2oz, single-sided, PC boards with 0.56"*0.73" copper pad | typ 56 °C/W | 2 |
| Thermal Resistance Junction to Case (Note 6) RJC | FR-4 substrate, 1"*1", 2oz, single-sided, PC boards with 0.56"*0.73" copper pad | typ 27 °C/W | 2 |
| Operating and Storage Temperature Range TJ, TSTG | min -55 · max 150 °C | 2 | |
| Forward Voltage Drop VF | IF = 5.0A, TJ = +25°C | typ 0.46 · max 0.52 V | 2 |
| Forward Voltage Drop VF | IF = 5.0A, TJ = +125°C | typ 0.39 · max 0.45 V | 2 |
| Leakage Current (Note 7) IR | VR = 60V, TJ = +25°C; short duration pulse test used to minimize self-heating effect | max 0.5 mA | 2 |
| Leakage Current (Note 7) IR | VR = 60V, TJ = +125°C; short duration pulse test used to minimize self-heating effect | typ 50 mA | 2 |

inspireFly-VT/inspireFly-EPS
inspireFly's custom EPS made for development of an open CubeSat architecture.

Yes. The symbol is Device:D_Schottky and the footprint Diode_SMD:D_SMA, both drawn on this page. PCBKit places them on a board for you when you design with it.
SMA, with 2 pins. Its footprint is drawn on this page.
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C3024223, with 5,564 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SS56 by hongjiacheng, the SS510 by MDD, the SS510 by hongjiacheng and the SS56 by MDD. Check their datasheets: a part that fits the footprint may still differ in its ratings.
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.