4 layers51.4 × 61 mm
2 layers22.9 × 48.3 mm
EZ FD
indigolemon/EZ-FD9Allow standard PC floppy drives to be used with an Amiga
- Size
- 22.9 × 48.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 23
- Pads
- 81
- Tracks, vias
- 132, 22
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 10 Feb 2022
- Updated
- 10 Feb 2022
Overview
EZ FD is an open-source printed circuit board by indigolemon, from the indigolemon/EZ-FD repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 22.9 × 48.3 mm with 8 parts on 23 nets, routed with 132 tracks and 22 vias.
It is built around the 74LVC1G32Z. Its parts include 2 capacitors, 2 connectors, 1 resistor and 1 diode. It belongs with the retro computing and games boards of this library.
Main components
1README
README.mdEZ-FD
Allow standard PC floppy drives to be used with an Amiga
A small PCB designed to sit between the Amiga motherboard and the floppy drive. Based on the same idea as the EZ-DF0 that was sold by Eyetech many years ago.
Testing shows it works well, though ATK shows a fluctuating RDY signal.
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1N4148 | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | 74LVC1G32 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | OR1 |
| 1 | Amiga Floppy Port | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | CN1 |
| 1 | C100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2 |
| 1 | CP4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1 |
| 1 | FDD Cable | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Vertical | CN2 |
| 1 | LOGO | aaa_logo:aaa_logo_small | G*** |
| 1 | R115K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
Similar boards
- 2 layers92 × 94.5 mm
- 2 layers132.5 × 38 mm
Emfi
Ledger-Donjon/silicon-toaster
SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:
81 parts60LGPL-3.0 - 4 layers47 × 39.5 mm
Stealthburner Toolhead PCB
acha666/RP2040_ToolheadPCB_SB
A Toolhead PCB for VORON StealthBurner based on RP2040
145 parts43GPL-3.0 - 4 layers88.9 × 20.3 mm
- 2 layers51 × 60.7 mm
DMG KGDU-10+
Mhouranix1125/DMG-KGDU-10-Plus-FRAM-Upgraded-PCB
First: Shoutout to HDR. His work was extremely vital in completing this project. Take a look at his github and check out some of the cool projects he has worked on!
25 parts34 - 2 layers
RPM411
TjarkG/RPM411
Reverse Engineering of the Vaisala RPM411 Pressur Sensor for the RS41 Radiosonde
88 parts13 - 2 layers200 × 120 mm
Questions
How big is the EZ FD PCB?
It measures 22.9 × 48.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EZ FD use?
8 parts, built around the 74LVC1G32Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EZ FD KiCad files?
From the indigolemon/EZ-FD repository on GitHub, at the commit this page was made from: the board is EZ-FD.kicad_pcb and its schematic EZ-FD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EZ FD design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).