

Buck converter negative voltage
- Size
- 60 × 30 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 8
- Pads
- 40
- Tracks, vias
- 27, 11
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 15 Jul 2023
- Updated
- 26 Nov 2024
Overview
Buck converter negative voltage is an open-source printed circuit board by ilkercosar, from the ilkercosar/Hardware-Desing repository on GitHub. It is a 4-layer board of 60 × 30 mm with 16 parts on 8 nets, routed with 27 tracks and 11 vias.
It is built around the LM2596S-ADJ, ES1J and SMAJ36A, with the SS34 among its other parts. Its parts include 5 diodes, 4 capacitors, 3 resistors, 2 connectors and 1 IC. It belongs with the power boards of this library.
Main components
4LM2596S-ADJ
TO-263-5-40℃~+125℃@(TA) 1 1.2V~37V 150kHz 3A 40V 80uA Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSUMWDC-DC ConvertersES1J
SMA(DO-214AC)-55℃~+150℃ 1 Independent 1.7V@1A 1A 35ns 5uA@600V 600V SMA Fast Recovery / High Efficiency Diodes ROHSMDDDiodes - Rectifiers - Fast RecoverySMAJ36A
DO-214AC(SMA)-65℃~+150℃ 1uA 36V 400W@10/1000us 44.2V 58.1V 6.9A@10/1000us TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdFuture Hardware-Desing
- 4-6 layer mipi csi to serializer board
- Usb camera controler board
- Luckfox Pico RV1103 I/0 board
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 47K | Resistor_SMD:R_0603_1608Metric | R1, R3, R4 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 100uF | Capacitor_SMD:C_1210_3225Metric | C3 |
| 1 | 33uH | Inductor_SMD:L_Bourns_SRR1208_12.7x12.7mm | L1 |
| 1 | 47uF | Capacitor_SMD:C_1210_3225Metric | C6 |
| 1 | 68uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | D-X-1A | Diode_THT:D_DO-15_P5.08mm_Vertical_AnodeUp | D4 |
| 1 | ES1J | ES1J-mod:DIOM4325X250N | D3 |
| 1 | IN-SOCKET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LM2596S-ADJ | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | OUT-SOCKET | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SMAJ36A | ES1J-mod:DIOM4325X250N | D1 |
| 1 | SS34 | Diode_SMD:D_SOD-123 | D2 |
More from ilkercosar/Hardware-Desing
2- 2 layers80 × 80 mm

- 2 layers26 × 25 mm

Similar boards
- 2 layers81 × 85 mm

Citofono vintage
michele88pg/citofono-vintage
Scheda open hardware ESP32-S3 che trasforma un telefono a disco d'epoca in citofono smart: apri con il disco, notifiche e apertura remota via ESPHome/Home Assistant.
64 parts - 4 layers128 × 60 mm

- 2 layers78.7 × 58.4 mm

- 2 layers40 × 60 mm

Scaner v1
Aleksei327/ESP32-C5-OBD2-Scanner
DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.
34 parts2 - 6 layers100.5 × 101.5 mm

Custom ESC
0BitsnBytes/McQueen
an overpowered rc car that poses a danger to my safety :)
192 parts1GPL-3.0 - 2 layers43 × 21.3 mm

- 2 layers39.1 × 68.9 mm

BaseChipOnly
ZonatedCord/Yggdrasill
Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.
34 parts1 - 2 layers60 × 30 mm

LM259
IKGB105/LM2596-Adjustable-Buck-Converter
Adjustable LM2596 buck converter — KiCad PCB + COMSOL thermal validation, documented as an honest engineering logbook
13 partsMIT
Questions
How big is the Buck converter negative voltage PCB?
It measures 60 × 30 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Buck converter negative voltage use?
16 parts, built around the LM2596S-ADJ, ES1J, SMAJ36A and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buck converter negative voltage KiCad files?
From the ilkercosar/Hardware-Desing repository on GitHub, at the commit this page was made from: the board is buck-converter-negative-voltage/main/main.kicad_pcb and its schematic air-machine-motherboard/button-line.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buck converter negative voltage design in my own project?
Its repository states no licence, so its author keeps all rights: ask ilkercosar before reusing the design.