2 layers54.6 × 71.8 mm
2 layers
Avrisp
ildus/avrisp1schematic and pcb for http://www.fischl.de/usbasp/
- Copper layers
- 2
- Thickness
- 1.5 mm
- Parts
- 25
- Nets
- 35
- Pads
- 90
- Tracks, vias
- 165, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170123)
- Created
- 21 May 2017
- Updated
- 26 May 2017
Overview
Avrisp is an open-source printed circuit board by ildus, from the ildus/avrisp repository on GitHub. It is a 2-layer board with 25 parts on 35 nets, routed with 165 tracks and 0 vias.
It is built around the ATMEGA8-16PU. Its parts include 10 resistors, 4 capacitors, 4 diodes, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 270 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6 |
| 2 | 1K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R7 |
| 2 | 22p | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 2 | 3V6 | TO_SOT_Packages_SMD:SOT-23 | D3, D4 |
| 2 | 68 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9 |
| 1 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 10K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 12MHz | Crystals:Crystal_HC50_Vertical | Y1 |
| 1 | 2.2K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | 4.7u | Capacitors_THT:CP_Radial_D4.0mm_P2.00mm | C4 |
| 1 | ATMEGA8-16PU | Housings_DIP:DIP-28_W7.62mm | U1 |
| 1 | CONN_02X05 | Connectors:IDC_Header_Straight_10pins | J4 |
| 1 | USB_A | Connectors:USB_A | J3 |
| 1 | green | LEDs:LED_1206 | D1 |
| 1 | red | LEDs:LED_1206 | D2 |
| 1 | selfprogramming | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | JP2 |
| 1 | slow sck | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | JP1 |
| 1 | vtarget | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | JP3 |
Questions
What parts does the Avrisp use?
25 parts, built around the ATMEGA8-16PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Avrisp KiCad files?
From the ildus/avrisp repository on GitHub, at the commit this page was made from: the board is avrisp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Avrisp design in my own project?
Its repository states no licence, so its author keeps all rights: ask ildus before reusing the design.
Similar boards
- 2 layers77.5 × 34.3 mm
Lan64usb
ThKattanek/lan64usb
Diese Hard- und Software ermöglicht den Transfer von Programmen vom PC zum Commodore 64 (C64).
19 parts3GPL-2.0 - 2 layers68.5 × 181 mm
- 2 layers80 × 80 mm
Eeprom programmer
jkreucher/eeprom-programmer
A EEPROM Programmer for my z80 stuff. Supported EEPROMS: 28C64, 28C256
23 parts1MIT - 2 layers124.5 × 99.1 mm
Vetrnik power
ondras12345/vetrnik
Electronics for heating water with power from a 2 kW wind turbine
138 parts - 2 layers175.5 × 94.5 mm
- 2 layers81.3 × 62.2 mm
- 2 layers88.6 × 27.6 mm
Riscduino ATMEGA Adpater Rev1.0
dineshannayya/riscduino_board
Riscduino PCB Board documentation
71 parts2