2 layers77.5 × 34.3 mm Lan64usb, the printed circuit board in 3D

Lan64usb

Diese Hard- und Software ermöglicht den Transfer von Programmen vom PC zum Commodore 64 (C64).

Size: 77.5 × 34.3 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 19
Nets: 41
Pads: 92
Tracks, vias: 219, 5
Pours: 2
Routed: Yes
KiCad: KiCad 4
Created: 15 Apr 2018
Updated: 27 May 2018

Overview

Lan64usb is an open-source printed circuit board by ThKattanek, from the ThKattanek/lan64usb repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 77.5 × 34.3 mm with 19 parts on 41 nets, routed with 219 tracks and 5 vias.

It is built around the ATMEGA8-16PU. Its parts include 5 capacitors, 5 resistors, 3 diodes, 3 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

ATMEGA8-16PU
DIP-28-40℃~+85℃ 10bit 16MHz 1KB 23 4.5V~5.5V 512Byte 8 Bit 8KB AVR Built-in FLASH DIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)

README

README.md

Lan64USB

Diese Hard- und Software ermöglicht den Transfer von Programmen vom PC zum Commodore 64 (C64).

Hardware / Schaltplan / Treiber

Die Hardware wurde mit KiCad entwickelt. Version 4.0.7 unter Ubuntu.

Mit diesem Tool wird das Treiber Setup Programm erstellt. (LibUSB-Win32)

https://sourceforge.net/projects/libusb-win32/files/libusbK-release/

Screenshot

Anleitung ist hier nur für Linux User !

Vorraussetzungen

Wird noch ergänzt !!

Komplettes Repositorie auf dem PC laden

bash

cd ~
git clone https://github.com/ThKattanek/lan64usb.git

Erstellen der PC Anwendung "Lan64Tool"

bash

cd ~/lan64usb/pc-software/lan64tool
mkdir build
cd build
qmake ..
make

Erstellen des Konsolentools lan64-send"

bash

cd ~/lan64usb/pc-software/konsolen_tools/lan64_send
mkdir build
cd build
qmake ..
make

AVR Firmware erstellen und flashen

bash

cd ~/lan64usb/firmware
make hex        // Erstellt das Binary
make program    // Flasht das Binary auf den avr mit avrdude (evtl. anpassen an eueren Programmer)
make clean      // Alles wieder aufräumen

Category and platform

AVR (ATmega, ATtiny)

Project files

Show this board on your page

https://pcbkit.io/boards/ThKattanek/lan64usb

The board's own page, for a message or a post.

Source

Repository: ThKattanek/lan64usb
Board file: hardware/lan64usb.kicad_pcb
Commit: 44b3150
Licence: GPL-2.0

Parts

Qty	Value	Footprint	References
2	100n	Capacitors_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm	C4, C5
2	22p	Capacitors_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm	C2, C3
2	68	Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R2, R3
2	ZD 3,6	Diodes_THT:D_DO-35_SOD27_P7.62mm_Horizontal	D2, D3
1	100	Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R1
1	10k	Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R4
1	10µ	w_capacitors:CP_5x11mm	C1
1	2,2k	Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R5
1	ATMEGA8-16PU	w_pth_circuits:dil_28-300_socket	U1
1	C64_Userport	ka_c64:c64_userport	J3
1	Crystal 12MHz	Crystals:Crystal_HC49-4H_Vertical	Y1
1	ISP	w_conn_strip:vasch_strip_3x2	J2
1	LED	w_indicators:led_3mm_green	D1
1	LOGO	ka_logos:logo_01_7_1mm_fsilk	G***
1	USB_B	Connectors:USB_B	J1

Similar boards

2 layers54.6 × 71.8 mm
Thermostat
protaskin/AVRThermostat
A programmable thermostat on ATmega8A and DS18B20.
31 parts7MIT
2 layers68.5 × 181 mm
Nixie2
cfallin/nixie2
Circuit design and firmware for a GPS-synchronized Nixie-tube clock
51 parts1
2 layers
Avrisp
ildus/avrisp
schematic and pcb for http://www.fischl.de/usbasp/
25 parts1
2 layers80 × 80 mm
Eeprom programmer
jkreucher/eeprom-programmer
A EEPROM Programmer for my z80 stuff. Supported EEPROMS: 28C64, 28C256
23 parts1MIT
2 layers124.5 × 99.1 mm
Vetrnik power
ondras12345/vetrnik
Electronics for heating water with power from a 2 kW wind turbine
138 parts
2 layers175.5 × 94.5 mm
V2 atmega8 encoder
schmolmo/distel-hardware
Multi-Player Controller for Distel Lang
29 parts
2 layers81.3 × 62.2 mm
Step linear
dzavalishin/hardware
Misc smart house hardware
82 parts3
2 layers88.6 × 27.6 mm
Riscduino ATMEGA Adpater Rev1.0
dineshannayya/riscduino_board
Riscduino PCB Board documentation
71 parts2

Questions

How big is the Lan64usb PCB?

It measures 77.5 × 34.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lan64usb use?

19 parts, built around the ATMEGA8-16PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lan64usb KiCad files?

From the ThKattanek/lan64usb repository on GitHub, at the commit this page was made from: the board is hardware/lan64usb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lan64usb design in my own project?

Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).