Skip to the content
2 layers50.8 × 22.9 mmAdalogger featherwing, the printed circuit board in 3D

Adalogger featherwing

iffycodes/Genesis2

Genesis Board design

Size
50.8 × 22.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
24
Nets
34
Pads
111
Tracks, vias
111, 10
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Apr 2025
Updated
18 Jun 2025

Overview

Adalogger featherwing is an open-source printed circuit board by iffycodes, from the iffycodes/Genesis repository on GitHub. It is a 2-layer board of 50.8 × 22.9 mm with 24 parts on 34 nets, routed with 111 tracks and 10 vias.

It is built around the PCF8523T and CR1220-2. Its parts include 4 resistors, 2 capacitors, 2 crystals, 1 IC and 1 switch.

Main components

2

README

README.md

Genesis

Genesis Board design

Change history

  • Removed Stemma QT connectors. Left second LDO (AP2112-3.3). It looks to only be powering the neopixel on GPIO0. Need to figure out if I can just use the main one.
  • Removed voltage divider used for LiPo monitoring. Provided A13_I35 that went to I35 on the ESP.
  • Removed LiPo charging circuit. VBUS is now only supplied by USB-C connector. Removed DMG3415U transistor in upper left of Page 2. Removed JST battery connector.
  • Removed extra reset switches.
  • Add initial annotation.
  • Rename +3V3 net on RTC page to match 3.3V global net name.
  • Rename MISO nets on Ethernet page so global MISO net can go to buffer
  • Remove second LDO. Power Neopixel from main regulator.
  • Start adding heirarchical labels. Add notes to check sub-feather jumpers.
  • Remove feather headers and ESP model from ETH and RTC pages.

Parts

24
QtyValueFootprintReferences
3adalogger featherwing:1X01_ROUNDINT1, JP3, SDCS0
210Kadalogger featherwing:0603-NOR1, R2
210uFadalogger featherwing:0805-NOC1, C2
2FIDUCIAL_1MMadalogger featherwing:FIDUCIAL_1MMFID1, FID2
1adalogger featherwing:FEATHERLOGOU$2
1adalogger featherwing:PCBFEAT-REV-040U$5
1adalogger featherwing:1X16_ROUNDJP2
1adalogger featherwing:SOLDERJUMPER_CLOSEDWIRESJ1
1adalogger featherwing:ADALOGGER_LOGOU$3
1adalogger featherwing:ADAFRUIT_3.5MMU$4
1adalogger featherwing:1X11_ROUNDJP1
1100Kadalogger featherwing:0603-NOR3
11Kadalogger featherwing:0603-NOR4
132khzadalogger featherwing:CRYSTAL_8X3.8Y1
1FEATHERWING_NODIMadalogger featherwing:FEATHERWING_NODIMMS1
1KMR2adalogger featherwing:BTN_KMR2_4.6X2.8SW1
1PCF8523Tadalogger featherwing:SOIC8_150MILIC1
1cr1220adalogger featherwing:CR1220-2B1
1microsdadalogger featherwing:MICROSDX4

More from iffycodes/Genesis

2

Similar boards

  • 2 layers68.6 × 53.3 mmPIDheaterUnoShield, the printed circuit board in 3D

    PIDheaterUnoShield

    diegodierick/Heater-shield

    This repository contains code and design files for a four channel Arduino based heater.

    40 parts1
  • 4 layers81.4 × 60 mmMKRZero V5.0, the printed circuit board in 3D

    MKRZero V5.0

    newdigate/samd21g-midi-tool

    kicad design for samdg21 arm cortex m0

    58 partsMIT
  • 2 layers44 × 50 mmRadioSupport, the printed circuit board in 3D

    RadioSupport

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    25 parts35Unlicense
  • 2 layers25.4 × 25.4 mmProject -R2, the printed circuit board in 3D

    Project -R2

    aspro648/KiCad

    My design files. Abandon all hope ye who enter here.

    11 parts33
  • 2 layers19 × 106 mmPetRockMain1, the printed circuit board in 3D

    PetRockMain1

    jsenzel1/petrock

    Eurorack components and footprints for KiCad.

    117 parts48
  • 2 layers158 × 85 mmPiPLC Mainboard, the printed circuit board in 3D

    PiPLC Mainboard

    Chrismettal/PiPLC

    Glorified breakout board + DIN rail case for Pis

    154 parts19
  • 2 layers36 × 29.3 mmBle mvp 1b rev0, the printed circuit board in 3D

    Ble mvp 1b rev0

    saewoonam/ble_adv_covid

    Repo to implement the advertise and scanner portion for bluetooth to enable encounter/exposure tracing (e.g. Apple/Google / TCN / etc...) on a nRF52840 based battery powered dongle/device

    71 parts10
  • 2 layers115 × 100 mmCog1, the printed circuit board in 3D

    Cog1

    diegodemarco/cog1

    cog1 is an open-source industrial IoT gateway (hardware and software) built as a motherboard hosting an Orange Pi Zero 3 Linux SBC.

    133 parts6MIT

Questions

How big is the Adalogger featherwing PCB?

It measures 50.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adalogger featherwing use?

24 parts, built around the PCF8523T and CR1220-2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adalogger featherwing KiCad files?

From the iffycodes/Genesis repository on GitHub, at the commit this page was made from: the board is kicad-import/adafruit-datalogger/adalogger featherwing.kicad_pcb and its schematic kicad-import/adafruit-datalogger/adalogger featherwing.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adalogger featherwing design in my own project?

Its repository states no licence, so its author keeps all rights: ask iffycodes before reusing the design.