Skip to the content
2 layers75 × 75 mmPixo esp, the printed circuit board in 3D

PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32

Size
75 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
54
Nets
61
Pads
261
Tracks, vias
355, 40
Pours
6
Routed
Yes
KiCad
KiCad 4
Created
18 Jan 2018
Updated
30 Oct 2018

Overview

Pixo esp is an open-source printed circuit board by idlehandsdev, from the idlehandsdev/pixopixel repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 75 × 75 mm with 54 parts on 61 nets, routed with 355 tracks and 40 vias.

It is built around the ESP32-S3, FT230XS-R and BAT20J. Its parts include 10 capacitors, 10 resistors, 5 diodes, 4 connectors and 3 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.

Main components

3

README

PCB/pixel/README.md

ESPEverywhere

ESP8266 Special Make/100 Kickstarter Edition

ESP Everywhere

Check out why this board exists here: https://www.youtube.com/watch?v=67Kh_ikb-ds

The ESP Everywhere was made to take part in the Kickstarter Make/100 Campaign You can get 1 of 100 boards assembled by me. Or you can Make your own. Kickstarter is here: https://www.kickstarter.com/projects/idlehandsdev/esp-everywhere-kickstarter-special-make-100

Parts

54
QtyValueFootprintReferences
61KResistors_SMD:R_0805R4, R6, R7, R8, R11, R12
30.1uFCapacitors_SMD:C_0805C1, C7, C8
210KResistors_SMD:R_0805R2, R5
210uFCapacitors_SMD:C_0805C9, C10
21uFCapacitors_SMD:C_0805C2, C11
227RResistors_SMD:R_0805R9, R10
247pFCapacitors_SMD:C_0805C4, C5
2BAT20Jidlehands_footprints:sod323D2, D6
12.2uFCapacitors_SMD:C_0805C3
1500mAidlehands_footprints:c_1206F1
1ACCPin_Headers:Pin_Header_Straight_1x08J2
1AP2112K-3.3VTO_SOT_Packages_SMD:SOT-23-5U1
1ESP-32SESP32:ESP-32SU4
1FBResistors_SMD:R_0805L1
1FT230XSHousings_SSOP:SSOP-16_3.9x4.9mm_Pitch0.635mmU3
1GPIOPin_Headers:Pin_Header_Straight_1x12P2
1GPIO0idlehands_footprints:PTS-LFSSW2
1LOGOidlehands_footprints:OSHLogoG***
1LOGOidlehands_footprints:SH_LOGOcuG***
1LOGOidlehands_footprints:SH_LOGOG***
1LOGOidlehands_footprints:IdlehandsdevLogoG***
1PIXO_CONNConnectors_JST_PH:Connectors_JST_S4B-PH-SM4-TBJ1
1PWRidlehands_footprints:Led_0603D1
1RESETidlehands_footprints:PTS-LFSSW3
1RXidlehands_footprints:Led_0603D3
1TXidlehands_footprints:Led_0603D4
1USB_OTGConnect:USB_Micro-BP1

The 40 most common of 54 parts.

More from idlehandsdev/pixopixel

3
  • 2 layers75 × 75 mmPixel 6pin, the printed circuit board in 3D

    Pixel 6pin

    idlehandsdev/pixopixel

    PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32

    282 parts65GPL-3.0
  • 2 layers75 × 75 mmPixel, the printed circuit board in 3D

    Pixel

    idlehandsdev/pixopixel

    PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32

    282 parts65GPL-3.0
  • 2 layers60 × 12 mmPixoTester, the printed circuit board in 3D

    PixoTester

    idlehandsdev/pixopixel

    PIXO Pixel is a 16 x 16 RGB LED display that runs off of an ESP32

    4 parts65GPL-3.0

Similar boards

  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 2 layers18 × 22 mmHccg, the printed circuit board in 3D

    Hccg

    idlehandsdev-backup/samd_hcc_mod

    A SAMD21G18 based easy to solder module.

    26 parts75GPL-3.0
  • 2 layers224.8 × 174.4 mmInkplate10 Soldered panel, the printed circuit board in 3D

    Inkplate10 Soldered panel

    SolderedElectronics/Soldered-Inkplate-10-hardware-design

    Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-10 designed by Soldered Electronics.

    319 parts18
  • 4 layers42 × 50 mmSimpleFC G, the printed circuit board in 3D

    SimpleFC G

    wangyeee/OpenHardware

    Collections of hardware design related to my drone project.

    134 parts10BSD-3-Clause
  • 2 layers35 × 50 mmImu rc hand unit, the printed circuit board in 3D

    Imu rc hand unit

    DimitriOnLSD/imu-rc

    Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.

    76 parts7MIT
  • 2 layers66.8 × 104.8 mmKicad project geiger, the printed circuit board in 3D

    Kicad project geiger

    IRNAS/bGeigieIntegrated

    Integrated version of Safecast bGeigie device

    93 parts6
  • 4 layers150 × 168 mmSoldered Inkplate 4 TEMPERA with glass panel panel, the printed circuit board in 3D

    Soldered Inkplate 4 TEMPERA with glass panel panel

    SolderedElectronics/Soldered-Inkplate-4-TEMPERA-with-glass-panel-hardware-design

    Inkplate 4 TEMPERA is an easy-to-use, all-in-one device that puts the power of e-paper technology in the palm of your hand.

    1,348 parts5
  • 2 layers294.8 × 119.8 mmInkplate 6 SS panel, the printed circuit board in 3D

    Inkplate 6 SS panel

    SolderedElectronics/Soldered-Inkplate-6-hardware-design

    Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6 designed by Soldered Electronics.

    660 parts5

Questions

How big is the Pixo esp PCB?

It measures 75 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Pixo esp use?

54 parts, built around the ESP32-S3, FT230XS-R and BAT20J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pixo esp KiCad files?

From the idlehandsdev/pixopixel repository on GitHub, at the commit this page was made from: the board is PCB/esp32_only/pixo_esp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pixo esp design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).