2 layers77 × 77 mm
2 layers18 × 22 mm
A SAMD21G18 based easy to solder module.
- Size
- 18 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 47
- Pads
- 165
- Tracks, vias
- 501, 70
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 May 2018
- Updated
- 30 Nov 2018
Overview
Hccg is an open-source printed circuit board by idlehandsdev-backup, from the idlehandsdev-backup/samd_hcc_mod repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 18 × 22 mm with 26 parts on 47 nets, routed with 501 tracks and 70 vias.
It is built around the BAT20J. Its parts include 8 capacitors, 5 connectors, 4 diodes, 3 resistors and 3 ICs. It belongs with the SAM D and SAM boards of this library.
Main components
1README
demo_boards/Cherry MX Board/README.mdSAMD21 Bridge Module
An easy to solder Arduino compatible surface mount module aimed to bridge the gap between using "off the shelf" microcontrollers to creating custom PCBs.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | TEST_1P | idlehands_footprints:TESTP_1_5 | J1, J2, J3, J4, J5 |
| 4 | 0.1uF | Capacitors_SMD:C_0402 | C3, C5, C11, C12 |
| 2 | 15pF | Capacitors_SMD:C_0402 | C2, C4 |
| 2 | 1k | Resistors_SMD:R_0402 | R8, R9 |
| 2 | 1uF | Capacitors_SMD:C_0402 | C8, C9 |
| 2 | BAT20J | agg:SOD-323 | D3, D4 |
| 1 | 10k | Resistors_SMD:R_0402 | R3 |
| 1 | AP2112K-3.3V | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | Crystal_Small | idlehands_footprints:crystal_smd_3.20x1.50mm2 | Y1 |
| 1 | GLED | LEDs:LED-0603 | D1 |
| 1 | LOGO | idlehands_footprints:SH_LOGO_2P5mm | G*** |
| 1 | SAMD21G18 | idlehands_footprints:QFN-48-EP-ST_NoVia | U2 |
| 1 | SAMD21_MOD | idlehands_footprints:SAMD21G18_MOD | U4 |
| 1 | SW_PUSH | idlehands_footprints:switch_kmr2 | SW4 |
| 1 | YLED | LEDs:LED-0603 | D2 |
More from idlehandsdev-backup/samd_hcc_mod
6- 2 layers75 × 45 mm
- 2 layers53.3 × 57.6 mm
Hcc arduino
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers60 × 55 mm
Programming jig
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
15 parts75GPL-3.0 - 2 layers18 × 7 mm
Lipo charge mod
idlehandsdev-backup/samd_hcc_mod
A SAMD21G18 based easy to solder module.
9 parts75GPL-3.0 - 2 layers70 × 35 mm
Similar boards
- 2 layers192.4 × 50 mm
- 2 layers224.8 × 174.4 mm
Inkplate10 Soldered panel
SolderedElectronics/Soldered-Inkplate-10-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-10 designed by Soldered Electronics.
319 parts18 - 4 layers42 × 50 mm
SimpleFC G
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
134 parts10BSD-3-Clause - 2 layers35 × 50 mm
Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
76 parts7MIT - 2 layers66.8 × 104.8 mm
- 4 layers150 × 168 mm
Soldered Inkplate 4 TEMPERA with glass panel panel
SolderedElectronics/Soldered-Inkplate-4-TEMPERA-with-glass-panel-hardware-design
Inkplate 4 TEMPERA is an easy-to-use, all-in-one device that puts the power of e-paper technology in the palm of your hand.
1,348 parts5 - 2 layers294.8 × 119.8 mm
Inkplate 6 SS panel
SolderedElectronics/Soldered-Inkplate-6-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6 designed by Soldered Electronics.
660 parts5 - 2 layers130.6 × 162.5 mm
Soldered Inkplate 5 Gen2 panel
SolderedElectronics/Soldered-Inkplate-5-Gen2-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-5-Gen2 designed by Soldered Electronics.
694 parts4
Questions
How big is the Hccg PCB?
It measures 18 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hccg use?
26 parts, built around the BAT20J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hccg KiCad files?
From the idlehandsdev-backup/samd_hcc_mod repository on GitHub, at the commit this page was made from: the board is hcc_g/PCB/hccg.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hccg design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).