2 layers68.7 × 53.6 mm
HapticDriverShield V10
id-studiolab/Arduino-Haptic-Driver-Shield
Arduino shield containing four TI 2605 haptic driver ICs.
46 parts
2 layers68.6 × 53.3 mm
HapticDriverShield
id-studiolab/Arduino-Haptic-Driver-ShieldArduino shield containing four TI 2605 haptic driver ICs.
- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 75
- Pads
- 199
- Tracks, vias
- 304, 24
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 May 2019
- Updated
- 15 May 2019
Overview
HapticDriverShield is an open-source printed circuit board by id-studiolab, from the id-studiolab/Arduino-Haptic-Driver-Shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 47 parts on 75 nets, routed with 304 tracks and 24 vias.
It is built around the DRV2605LDGS. Its parts include 14 resistors, 12 capacitors, 8 connectors, 5 ICs and 4 switches. It belongs with the microcontroller boards boards of this library.
Main components
1README
README.md##Arduino Haptic Driver Shield
Arduino shield containing four TI 2605 haptic driver ICs.
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 4K7 | Resistor_SMD:R_0805_2012Metric | R01, R02, R11, R12, R21, R22, R31, R32, R40, R41 |
| 9 | 1uF | Capacitor_SMD:C_0805_2012Metric | C00, C01, C10, C11, C20, C21, C30, C31, C61 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R00, R10, R20, R30 |
| 4 | 450301014042 | _switch:WUERTH-450301014042-ND | SW00, SW10, SW20, SW30 |
| 4 | Conn_01x02 | _connectors:Phoenix_MKDS_2P_3.81 | J00, J10, J20, J30 |
| 4 | DRV2605L | Package_SO:TSSOP-10_3x3mm_P0.5mm | U00, U10, U20, U30 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C40, C60 |
| 2 | AudioJack3_Ground | _connectors:Lumberg 1503 17 | J70, J71 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C62 |
| 1 | ARDUINO_SHIELD | _arduino_shield:ARDUINO_SHIELD | SHIELD00 |
| 1 | Jack-DC | _connectors:BarrelJack_Wuerth_6941xx301002 | J61 |
| 1 | Jumper_NC_Dual | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | JP60 |
| 1 | LOGO | _logo:Oculus_7.3x4.4 | G*** |
| 1 | LOGO | _logo:TU_6.9x7 | G*** |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U40 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521_CircularHoles | J60 |
More from id-studiolab/Arduino-Haptic-Driver-Shield
1Similar boards
- 2 layers287.8 × 126.7 mm
- 6 layers50.2 × 77.2 mm
Meko
KOEGlike/meko
A linux music player with ddr3, a 70hz e-paper display and a haptic touchpad
274 parts90GPL-3.0 - 2 layers71.1 × 24.1 mm
Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57 - 4 layers82.8 × 33 mm
E ink watch
sandgum/Triangulate-ES_01-Watch
A 5mm thick smartwatch which uses an E-ink display and two OLEDs to display information while consuming very little power
162 parts22 - 2 layers55.6 × 71.2 mm
- 4 layers72 × 75 mm
Nrf52480 Dev board
brendena/Nordic_Pebble_Steel
The goal of this project is to replace the main motherboard in the pebble steel with newer parts. Specifically the cpu will be a Nordic NRF52840.
75 parts9 - 4 layers56 × 48 mm
- 4 layers25 × 50 mm
Print and Place PCB
ollyoid/Printegrated-Circuits
GCode post-processor for integrating PCBs into 3D prints
49 parts5
Questions
How big is the HapticDriverShield PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HapticDriverShield use?
47 parts, built around the DRV2605LDGS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HapticDriverShield KiCad files?
From the id-studiolab/Arduino-Haptic-Driver-Shield repository on GitHub, at the commit this page was made from: the board is hw/HapticDriverShield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HapticDriverShield design in my own project?
Its repository states no licence, so its author keeps all rights: ask id-studiolab before reusing the design.