2 layers208.5 × 127.3 mm
Leverless controller 3board
IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games
110 parts
2 layers208.5 × 127.3 mm
Leverless controller 3board
IceyMu/Leverless-ControllerA Leverless Controller for Fighting Games
- Size
- 208.5 × 127.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 80
- Pads
- 371
- Tracks, vias
- 559, 38
- Pours
- 22
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Jul 2024
- Updated
- 1 Oct 2025
Overview
Leverless controller 3board is an open-source printed circuit board by IceyMu, from the IceyMu/Leverless-Controller repository on GitHub. It is a 2-layer board of 208.5 × 127.3 mm with 111 parts on 80 nets, routed with 559 tracks and 38 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 20 switches, 15 capacitors, 9 resistors, 4 diodes and 3 ICs. It belongs with the RP2040 boards of this library.
Main components
2
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdLeverless-Controller
A Leverless Controller for Fighting Games
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | SolderJumper_2_Bridged | Fightstick_Library:EdgeSolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP10, JP11, JP12, JP13, JP14, JP15, JP17, JP18, JP19, JP20, JP21, JP22, JP23, JP24 +10 |
| 14 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12, H13, H14 |
| 10 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX | SW2_LK1, SW3_MK1, SW4_LP1, SW5_MP1, SW6_DI1, SW7_HP1, SW8_DP1, SW9_HK1, SW12_THROW1, SW16_SPACE1 |
| 9 | , , , , , , , , | ||
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C8, C9, C10, C11, C12, C13, C14, C15 |
| 4 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4 |
| 4 | SW_Push | PCM_Switch_Keyboard_Cherry_MX:SW_Cherry_MX_PCB | SW10_SHARE1, SW11_START1, SW14_PS1, SW15_TOUCHPAD1 |
| 4 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | SW17_W1, SW18_DOWN1, SW19_LEFT1, SW20_RIGHT1 |
| 3 | Board | PCM_kikit:Board | B1, B2, B3 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP3, TP4 |
| 1 | 12 mhz crystal | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | AMS1117-3.3_SOT223 | Fightstick_Library:LDO_AMS1117-3.3 | U2 |
| 1 | Conn_01x03_Socket | Fightstick_Library:Debug_Points | J2 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | Memory Reset | Fightstick_Library:SW_TS-1187A-C-A-B | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB_A | Connector_USB:USB_A_Receptacle_GCT_USB1046 | J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Fightstick_Library:USB_C_Receptacle_C6332272 | J1 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |
| 1 | ~ | PCM_Mounting_Keyboard_Stabilizer:Stabilizer_Cherry_MX_2.00u | S1 |
More from IceyMu/Leverless-Controller
5- 2 layers95 × 99.5 mm
- 2 layers61 × 96.8 mm
- 2 layers92.5 × 89.5 mm
- 2 layers205.3 × 118.5 mm
Similar boards
- 2 layers42 × 67 mm
- 2 layers181 × 97 mm
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm
- 4 layers102.9 × 96.7 mm
PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm
Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm
- 2 layers44 × 44 mm
Questions
How big is the Leverless controller 3board PCB?
It measures 208.5 × 127.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Leverless controller 3board use?
111 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Leverless controller 3board KiCad files?
From the IceyMu/Leverless-Controller repository on GitHub, at the commit this page was made from: the board is Rev1/KiCAD/3_board - REV B/leverless_controller_3board.kicad_pcb and its schematic Rev1/KiCAD/3_board - REV B/Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Leverless controller 3board design in my own project?
Its repository states no licence, so its author keeps all rights: ask IceyMu before reusing the design.