
Leverless controller 3board
IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games

A Leverless Controller for Fighting Games
3board a is an open-source printed circuit board by IceyMu, from the IceyMu/Leverless-Controller repository on GitHub. It is a 2-layer board of 95 × 99.5 mm with 73 parts on 56 nets, routed with 413 tracks and 24 vias.
It is built around the RP2040 and W25Q128JVSIQ. Its parts include 15 capacitors, 9 resistors, 6 switches, 4 diodes and 3 ICs. It belongs with the RP2040 boards of this library.
A Leverless Controller for Fighting Games
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | SolderJumper_2_Bridged | Fightstick_Library:EdgeSolderJumper-2_Left_Half | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14 |
| 9 | , , , , , , , , | ||
| 9 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C8, C9, C10, C11, C12, C13, C14, C15 |
| 5 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4, H5 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4 |
| 4 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | SW17_W, SW18_DOWN, SW19_LEFT, SW20_RIGHT |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C3, C4 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R5 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | TestPoint | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1, TP2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP4 |
| 1 | 12 mhz crystal | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | AMS1117-3.3_SOT223 | Fightstick_Library:LDO_AMS1117-3.3 | U2 |
| 1 | Board | PCM_kikit:Board | B1 |
| 1 | Conn_01x03_Socket | Fightstick_Library:Debug_Points | J2 |
| 1 | DNF | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | Memory Reset | Fightstick_Library:SW_TS-1187A-C-A-B | SW1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX | SW8_DP |
| 1 | USB_C_Receptacle_USB2.0_14P | Fightstick_Library:USB_C_Receptacle_C6332272 | J1 |
| 1 | W25Q128JVSIQ | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U3 |

IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games

IceyMu/Leverless-Controller
A Leverless Controller for Fighting Games





shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.


polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.

Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.


It measures 95 × 99.5 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IceyMu/Leverless-Controller repository on GitHub, at the commit this page was made from: the board is Rev1/KiCAD/3_board - REV B/3board_a.kicad_pcb and its schematic Rev1/KiCAD/3_board - REV B/Buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IceyMu before reusing the design.