
TempCtrl
charlesbaynham/DigitalTemperatureController
Schematic, PCB and source code for a high-precision digital temperature controller

Eclectronics project 2 breakout board for arduino nano.
Project 2 Arduino is an open-source printed circuit board by IanOlin, from the IanOlin/arduinoBreakoutBoard repository on GitHub. It is a 2-layer board of 39.2 × 31.5 mm with 29 parts on 55 nets, routed with 325 tracks and 38 vias.
It is built around the ATMEGA328P-AU and FT232RL. Its parts include 8 capacitors, 6 resistors, 6 connectors, 4 diodes and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1K | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5, R6 |
| 4 | 100nF | Capacitors_SMD:C_0603 | C1, C4, C6, C9 |
| 4 | D | Diodes_SMD:D_0805 | D1, D3, DX1, DX2 |
| 2 | 10uF | Capacitors_SMD:C_0805 | C2, C5 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C3, C7 |
| 2 | Conn_01x08 | Pin_Headers:Pin_Header_Straight_1x08_Pitch1.00mm | J10, J11 |
| 1 | ATMEGA328P-AU | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U3 |
| 1 | Conn_01x03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch1.00mm | J13 |
| 1 | Conn_01x06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch1.00mm | J12 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch1.00mm | J4 |
| 1 | Crystal_GND24 | p2arduino:TM16 | Y1 |
| 1 | FT232RL | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U1 |
| 1 | Fuse | p2arduino:FuseSMD0603 | F1 |
| 1 | SW_Push | p2arduino:SPSTbtn | SW1 |
| 1 | USB_microB_2040002-1 | Project 2_Arduino:USB_microB_2040002-1 | J3 |

charlesbaynham/DigitalTemperatureController
Schematic, PCB and source code for a high-precision digital temperature controller

charlesbaynham/GP22_RF_Photon_Correllation
Schematic, PCB and source code for a low-cost TDC interface designed for performing RF--Photon correllation for atomic physics experiments

PhirePhly/USB-PiDU
Multiple switchable USB DCP power ports on a Raspberry Pi-sized board

justraven/FlightController
Flight Controller PCB Design, Utilized ATMega328P. Compatible with MultiWii

UCHIC/CIWS-MWM-Logger
Hardware and software for a magnetically-driven smart water meter datalogger

FRC-1721/AccidentCounter
A digital sign hung in the build space advertising days without incident

MCLEANS/AVR-BRIDGE-ATMEGA328P-PCB
PCB design for the AVR-BRIDGE ATMEGA328P test board

It measures 39.2 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ATMEGA328P-AU and FT232RL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the IanOlin/arduinoBreakoutBoard repository on GitHub, at the commit this page was made from: the board is Project 2_Arduino/Project 2_Arduino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask IanOlin before reusing the design.