Skip to the content
2 layers60.2 × 25 mmLink-434, the printed circuit board in 3D

ISM 434 MHz band communications system

Size
60.2 × 25 mm
Copper layers
2
Thickness
1.6 mm
Parts
60
Nets
60
Pads
239
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
18 Aug 2020
Updated
17 Jul 2025

Overview

Link-434 is an open-source printed circuit board by ian-ross, from the ian-ross/link-434-old repository on GitHub, published under the MIT licence. It is a 2-layer board of 60.2 × 25 mm with 60 parts on 60 nets.

It is built around the SP0503BAHTG. Its parts include 30 capacitors, 9 resistors, 6 inductors, 3 diodes and 3 connectors. It belongs with the Silicon Labs (EFR32, EFM) boards of this library.

Main components

1

README

README.md

link-434

OBSOLETE: THIS WAS ATTEMPT #1. GOING TO TRY SOMETHING A BIT DIFFERENT...

ISM 434 MHz band communications system:

  • Silicon Labs EFM8UB3 microcontroller.
  • Maxim MAX7032 434 MHz transceiver.
  • USB "dongle" form factor.
  • Flexible interface: USB or UART via 0.1" header.
  • C2 programming interface.

Parts

60
QtyValueFootprintReferences
7220plink-434:C_0402_1005MetricC8, C12, C22, C24, C26, C28, C30
30.01Ulink-434:C_0402_1005MetricC23, C27, C29
30.1Ulink-434:C_0402_1005MetricC2, C4, C25
3100plink-434:C_0402_1005MetricC13, C16, C17
322nlink-434:L_Coilcraft_0603CSL1, L2, L4
2100link-434:CAT16101J4LFRN1, RN2
2100Klink-434:R_0402_1005MetricR16, R17
2100p 5%link-434:C_0402_1005MetricC6, C7
24.7Ulink-434:C_0402_1005MetricC1, C3
247nlink-434:C_0402_1005MetricC18, C21
26.8plink-434:C_0402_1005MetricC11, C15
11.5nlink-434:C_0402_1005MetricC19
11.8plink-434:C_0402_1005MetricC20
1100link-434:R_0402_1005MetricR5
110Klink-434:R_0402_1005MetricR4
110nlink-434:L_Coilcraft_0603CSL5
110plink-434:C_0402_1005MetricC14
116nlink-434:L_Murata_LQW18ASxxxx00xL6
117.63416MHz, 4.5pF load cap.link-434:Crystal_SMD_HC49-SDY1
11Mlink-434:R_0402_1005MetricR14
11nlink-434:C_0402_1005MetricC5
122K1link-434:R_0402_1005MetricR10
12K32link-434:R_0402_1005MetricR12
1470plink-434:C_0402_1005MetricC10
147K5link-434:R_0402_1005MetricR11
1680plink-434:C_0402_1005MetricC9
168nlink-434:L_Coilcraft_0603CSL3
1698link-434:R_0402_1005MetricR13
1782422221link-434:Ferrite_0402_1005MetricFB1
1Conn_01x05link-434:PinHeader_1x05_P2.54mm_VerticalJ2
1EFM8UB31F40Glink-434:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalViasU1
1GREENlink-434:LED_0805_2012MetricD2
1Jumper_NO_Smalllink-434:PinHeader_1x02_P2.54mm_VerticalJP1
1MAX7032ATJ+link-434:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalViasU2
1REDlink-434:LED_0805_2012MetricD1
1SFECV10M7JA00link-434:Resonator_SMD_muRata_SFECV-3Pin_6.9x2.9mmY2
1SMAlink-434:SMA_Linx_CONSMA001_VerticalJ3
1SP0503BAHTlink-434:SOT-143D3
1SW_Pushlink-434:PTS526SM15SMTR2LFSSW1
1USB_A_PLUGlink-434:usb-a-edgeJ1

Similar boards

  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 4 layers85 × 56 mmPslab mini, the printed circuit board in 3D

    Pslab mini

    fossasia/pslab-mini-hardware

    PSLab Mini Hardware https://pslab.io

    182 parts1.2kApache-2.0
  • 4 layers55 × 14.7 mmMinCab, the printed circuit board in 3D

    MinCab

    merocle/mincab

    small carrier board for Raspberry Pi CM4

    41 parts180CC-BY-SA-4.0
  • 2 layers145 × 165 mmBreakpanel, the printed circuit board in 3D

    Breakpanel

    monero-project/kastelo

    The Sekura Monero Hardware Wallet

    690 parts115
  • 4 layers60 × 40 mmInkTalk, the printed circuit board in 3D

    InkTalk

    FeralFirmware/TailTalk

    A modern async user space AppleTalk stack with Rust + Tokio

    66 parts103GPL-3.0
  • 6 layers203 × 151.8 mmPDNode Baseboard, the printed circuit board in 3D

    PDNode Baseboard

    DvidMakesThings/HW_PDNode-600-Pro

    The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.

    236 parts86AGPL-3.0
  • 4 layers100 × 180 mmX65-sbc revB1, the printed circuit board in 3D

    X65-sbc revB1

    jsyk/x65

    The 65c02 and 65c816s-based modern retro computer

    344 parts59MIT
  • 2 layers58 × 38.3 mmEsp32-caliper, the printed circuit board in 3D

    Esp32-caliper

    Mew463/esp32-caliper

    It features a built in 150mAh battery and a USB C interface for charging/uploading code.

    44 parts59

Questions

How big is the Link-434 PCB?

It measures 60.2 × 25 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Link-434 use?

60 parts, built around the SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Link-434 KiCad files?

From the ian-ross/link-434-old repository on GitHub, at the commit this page was made from: the board is hardware/link-434.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Link-434 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).