2 layers35.6 × 66.5 mm
2 layers98.6 × 98.6 mm
Tiny
hulkco/Varios2Varios
- Size
- 98.6 × 98.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 10
- Pads
- 63
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 12 Feb 2022
Overview
Tiny is an open-source printed circuit board by hulkco, from the hulkco/Varios repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 98.6 × 98.6 mm with 22 parts on 10 nets.
It is built around the ATTINY85-20SU and S2B-PH-SM4-TB. Its parts include 12 diodes, 2 ICs, 2 switches, 1 resistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
S2B-PH-SM4-TB
2A 100V, Pitch 2.0mm, 2 Positions Disconnectable Crimp Style, SMD Male Header, Side EntryJSTUncategorised
README
README.mdVarios
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | LED_Small_ALT | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U1 |
| 1 | Battery_3V_Coin | Tiny:S8211R | BT1 |
| 1 | Codi_Coin | Cody_Coin:Cody_Coin | U2 |
| 1 | MountingHole | Tiny:MountingHole_Codi_Coin | H1 |
| 1 | PINHD-1X6 | Tiny:PogoPinSocket_2x03_P2.54mm | JP5 |
| 1 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1 |
| 1 | S2B-PH-SM4-TB | Cody_Coin:JST-S2B-PH-SM4-TB | J2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | SW_Push_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW2 |
The 21 most common of 22 parts.
Questions
How big is the Tiny PCB?
It measures 98.6 × 98.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tiny use?
22 parts, built around the ATTINY85-20SU and S2B-PH-SM4-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiny KiCad files?
From the hulkco/Varios repository on GitHub, at the commit this page was made from: the board is Badges_Pines/Cody_Coin_Boton/Tiny.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiny design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from hulkco/Varios
12- 2 layers38.6 × 69.5 mm
- 16 layers88.3 × 64.5 mm
- 2 layers43.6 × 41.1 mm
- 2 layers108 × 67.2 mm
- 2 layers35.6 × 66.5 mm
- 2 layers50 × 50 mm
- 2 layers
- 2 layers68.6 × 53.3 mm
- 2 layers24 × 22 mm
- 2 layers85.7 × 92.7 mm
- 2 layers40.6 × 38.1 mm
Similar boards
- 6 layers69.7 × 76.7 mm
Amulet controller
EPFLXplore/XRE_LeggedRobot_HW
PCB designs for Xplore Research's robot dog project
414 parts348Apache-2.0 - 6 layers84 × 50 mm
Solar ribbit
Ribbit-Network/ribbit-network-frog-hardware
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.
171 parts107MIT - 2 layers89 × 55.5 mm
Mintypcb
jackw01/pi-tin
Open source raspberry pi handheld retro gaming console
129 parts75CERN-OHL-W-2.0 - 4 layers36.5 × 69 mm
Storm tracker
solderable/storm-tracker-hardware
Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package
102 parts58 - 2 layers100.9 × 62.4 mm
- 4 layers65 × 30 mm
Soleil
protolux-electronics/soleil_hardware
Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi
81 parts22CERN-OHL-P-2.0 - 2 layers61.5 × 25 mm
- 4 layers317.5 × 134.6 mm
Keeb
bandakkalokka/kottoruwa-hardware
An awesome wireless mechanical keyboard with Li-Ion Battery Managemet, 2.4GHz radio and an OLED Display!
233 parts12GPL-3.0