

Hackster Round
Varios
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 26
- Pads
- 92
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 12 Feb 2022
Overview
Hackster Round is an open-source printed circuit board by hulkco, from the hulkco/Varios repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 39 parts on 26 nets.
It is built around the SPX3819M5-L-3-3/TR, WS2812B and MBRA140. Its parts include 17 connectors, 7 resistors, 7 diodes, 4 capacitors and 2 ICs. It belongs with the ESP8266 boards of this library.
Main components
3SPX3819M5-L-3-3/TR
SOT-23-5-40℃~+125℃ 1 16V 3.3V 340mV@(500mA) 40uVrms 500mA 70dB 90uA Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedMBRA140
SMA(DO-214AC)-55℃~+125℃ 1 Independent 1A 30A 40V 500uA@40V 550mV@1A SMA(DO-214AC) Schottky Diodes ROHSonsemiSchottky Diodes
README
README.mdVarios
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TEST_1P | Hackster_Round:CONN-HEADER-STRAIGHT-P2.54MM-1x01 | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 6 | 10k | Hackster_Round:R_0805_HandSoldering | R1, R3, R4, R5, R6, R7 |
| 5 | WS2812B | Hackster_Round:WS2812B | LED1, LED2, LED3, LED4, LED5 |
| 2 | 10uF | Hackster_Round:C_0805_HandSoldering | C1, C2 |
| 1 | SPX3819M5-L-3-3/TR | Hackster_Round:SOT-23-5_HandSoldering | U2 |
| 1 | 1k | Hackster_Round:R_0805_HandSoldering | R2 |
| 1 | 1uF | Hackster_Round:C_0805_HandSoldering | C4 |
| 1 | 22nF | Hackster_Round:C_0805_HandSoldering | C3 |
| 1 | CONN_01X02 | Hackster_Round:Molex_PicoBlade_53261-0271_02x1.25mm_Angled | J1 |
| 1 | ESP-12 | Hackster_Round:ESP-12S_SMD | U1 |
| 1 | GS2 | Hackster_Round:GS2 | J17 |
| 1 | MBRA140 | Hackster_Round:D_SOD-123 | D1 |
| 1 | ON | Hackster_Round:LED_0805 | D2 |
| 1 | RESET | Hackster_Round:SW_SPST_B3U-1000P | SW2 |
| 1 | USER/PROG | Hackster_Round:SW_SPST_B3U-1000P | SW1 |
More from hulkco/Varios
12- 2 layers35.6 × 66.5 mm

- 2 layers38.6 × 69.5 mm

- 16 layers88.3 × 64.5 mm

- 2 layers43.6 × 41.1 mm

- 2 layers108 × 67.2 mm

- 2 layers35.6 × 66.5 mm

- 2 layers50 × 50 mm

- 2 layers68.6 × 53.3 mm

- 2 layers24 × 22 mm

- 2 layers85.7 × 92.7 mm

- 2 layers40.6 × 38.1 mm

- 2 layers205.3 × 104.2 mm

Similar boards
- 2 layers74.7 × 96.8 mm

- 2 layers73.1 × 87.8 mm

- 2 layers49.9 × 39.4 mm

ATM90E26 Featherwing
whatnick/ATM90E26_Featherwing_KiCAD
ATM90E26 Featherwing with ongoing development in KiCAD
59 parts4 - 2 layers68.6 × 53.3 mm

- 2 layers91 × 154.9 mm

- 2 layers

- 2 layers45 × 135 mm

- 2 layers50.3 × 42.7 mm

Questions
What parts does the Hackster Round use?
39 parts, built around the SPX3819M5-L-3-3/TR, WS2812B and MBRA140. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hackster Round KiCad files?
From the hulkco/Varios repository on GitHub, at the commit this page was made from: the board is Hackster/Hackster_Round/001.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hackster Round design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).