

Main 2.4
My projects
- Size
- 201.5 × 206.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 90
- Pads
- 278
- Tracks, vias
- 588, 26
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2023
- Updated
- 9 Jan 2025
Overview
Main 2.4 is an open-source printed circuit board by hughminhphan, from the hughminhphan/PROJECTS repository on GitHub. It is a 2-layer board of 201.5 × 206.6 mm with 43 parts on 90 nets, routed with 588 tracks and 26 vias.
It is built around the XT60-M, B2B-XH-A(LF)(SN) and B3B-XH-A(LF)(SN). Its parts include 25 connectors, 3 capacitors, 2 resistors and 2 ICs.
Main components
3XT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorisedB2B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board ConnectorB3B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x3P 2.5mm 250V 3 3A 3P 5.75mm 7mm 9.9mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x08_Female | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J10, J14, J17, J20, J21 |
| 3 | 10UF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | XT60-M | XT60-M:XT60-M | J5, J7, J8 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R13, R14 |
| 2 | Conn_01x18_Female | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J18, J22 |
| 1 | A000067 | A000067:ARDUINO_A000067_FLIPPED | A1 |
| 1 | Adafruit_BNO055_STEMMA_QT | 2.3 PCBs:Adafruit IMU BNO055 | U4 |
| 1 | B2B-XH-A(LF)(SN) | B2B-XH-A_LF__SN_:JST_B2B-XH-A(LF)(SN) | J25 |
| 1 | B3B-XH-A(LF)(SN) | B3B-XH-A_LF__SN_:JST_B3B-XH-A(LF)(SN) | J24 |
| 1 | Conn_01x10_Female | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J19 |
| 1 | DC-DC_Buck_Converter_7-24V_to_5V_4A | 2.3 PCBs:DC-DC_Buck_Converter_7-24V_to_5V_4A | U1 |
| 1 | JST-XH M1 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J1 |
| 1 | JST-XH M2 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J2 |
| 1 | JST-XH M3 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J3 |
| 1 | JST-XH M4 ENC | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J4 |
| 1 | JST-XH Screen | B4B-XH-A_LF__SN_:JST_B4B-XH-A(LF)(SN) | J13 |
| 1 | LOGIC_SWITCH | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP18 |
| 1 | Line PCB 1 | Box IDC header 2x3:Box IDC header 2x3 | J9 |
| 1 | Line PCB 2 | Box IDC header 2x3:Box IDC header 2x3 | J23 |
| 1 | Motor Driver 1 Power | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J15 |
| 1 | Motor Driver 2 Power | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J16 |
| 1 | Motor Driver Inputs | Box IDC header 2x5:Box IDC header 2x5 | J11 |
| 1 | OpenMV H7 | Box IDC header 2x3:Box IDC header 2x3 | J12 |
| 1 | TestPoint - 5V | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | TestPoint - GND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | TestPoint - RX | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
| 1 | TestPoint - SCL | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | TestPoint - SDA | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | TestPoint - TX | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | Voltmeter | 5mm Pitch 2-Pin Screw Terminal Block:5mm Pitch 2-Pin Screw Terminal Block | J6 |
More from hughminhphan/PROJECTS
12- 2 layers68 × 23.4 mm

- 4 layers133.1 × 97.6 mm

- 2 layers

- 2 layers

- 2 layers135 × 95.3 mm

- 4 layers142.5 × 86.6 mm

- 2 layers

- 2 layers

- 2 layers99 × 99 mm

- 2 layers89 × 79 mm

- 2 layers206 × 197.4 mm

- 2 layers169 × 150 mm

Similar boards
- 2 layers52.8 × 55 mm

ILDAWaveX16
stanleyondrus/ILDAWaveX16
ILDAWaveX16 is an open-source, high-resolution, wireless laser DAC with SD-card playback, network control, and ILDA output.
95 parts42 - 2 layers197.3 × 121.2 mm

TeensyMaestro Main PCB
rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro
115 parts13CERN-OHL-P-2.0 - 2 layers100 × 65 mm

- 4 layers275 × 240 mm

- 2 layers58.5 × 50 mm

- 4 layers101 × 51.5 mm

Quack core
HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.
138 parts1CERN-OHL-S-2.0 - 2 layers80 × 55 mm

Im01
amuzdgp3-prog/im-01-pulse-device
Отдельный модуль к системе обслуживания аппаратов 2.apixspb.ru. Устройство слушает импульсные выходы монетоприёмника и купюроприёмника, копит показания в FRAM и дважды в сутки передаёт их на сервер по LTE Cat.1.
108 parts - 4 layers62 × 50 mm

Battery monitor rev a
bogdan-kovalchuk/esp32-battery-charging-monitoring
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
66 partsMIT
Questions
How big is the Main 2.4 PCB?
It measures 201.5 × 206.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Main 2.4 use?
43 parts, built around the XT60-M, B2B-XH-A(LF)(SN) and B3B-XH-A(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Main 2.4 KiCad files?
From the hughminhphan/PROJECTS repository on GitHub, at the commit this page was made from: the board is Goku _ Vegeta/2.4/Main 2.4 - GV2/Main 2.4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Main 2.4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.