

My projects
- Size
- 202.9 × 102.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 105
- Pads
- 349
- Tracks, vias
- 837, 97
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Aug 2023
- Updated
- 9 Jan 2025
Overview
Bulma is an open-source printed circuit board by hughminhphan, from the hughminhphan/PROJECTS repository on GitHub. It is a 2-layer board of 202.9 × 102.5 mm with 77 parts on 105 nets, routed with 837 tracks and 97 vias.
It is built around the ESP32-DEVKITC-VE, DRV8870DDAR and PCA9685PW, with the IRLZ44N among its other parts. Its parts include 29 resistors, 18 connectors, 9 capacitors, 9 ICs and 9 diodes. It belongs with the ESP32 boards of this library.
Main components
4ESP32-DEVKITC-VE
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesDRV8870DDAR
HSOP-8-EP-40℃~+125℃ 1 10uA 3.6A 565mΩ Yes HSOP-8-EP Brushed DC Motor Drivers ROHSTexas InstrumentsBrushed DC Motor DriversPCA9685PW
TSSOP-28-40℃~+85℃ 100kHz~1MHz 16 2.3V~5.5V 25mA 5.5V Built-in PWM TSSOP-28 LED Drivers ROHSNXP SemiconductorsLED DriversIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 220R | Resistor_SMD:R_0805_2012Metric | R2, R7, R8, R11, R12, R13, R14, R15, R16, R17, R28 |
| 8 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D4, D5, D6, D7, D8, D9 |
| 5 | 0.1UF20V | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C8 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric | R9, R10, R22, R23, R24 |
| 5 | 200R | Resistor_SMD:R_1206_3216Metric | R1, R3, R4, R5, R6 |
| 5 | 730R | Resistor_SMD:R_0805_2012Metric | R19, R20, R21, R25, R26 |
| 5 | DRV8870DDAR | DRV8870DDAR:VREG_LM5017MR_NOPB | U1, U2, U3, U4, U7 |
| 3 | 150R | Resistor_SMD:R_0805_2012Metric | R18, R27, R29 |
| 2 | 10UF20V | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | IRLZ44N | Package_TO_SOT_SMD:TO-263-2 | Q3, Q4 |
| 1 | 1000U | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C7 |
| 1 | 10UF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 1825116-1 | 1825116-1:SW_1825116-1 | S1 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 2S Li-Po | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J9 |
| 1 | 4S Li-Po | Connector_BarrelJack:BarrelJack_Horizontal | J10 |
| 1 | BOOST CONVERTER IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | BOOST CONVERTER OUT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Cam H7 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J18 |
| 1 | Chi Chi Conn | SSQ-103-01-T-D:SAMTEC_SSQ-103-01-T-D | J7 |
| 1 | Dribbler Motor 1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Drive Motor 1 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Drive Motor 2 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | Drive Motor 3 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | Drive Motor 4 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | ESP32-DEVKITC | ESP32-DEVKITC:MODULE_ESP32-DEVKITC | U5 |
| 1 | GY-521 | Library:GY-521 | U6 |
| 1 | LM1084-5.0 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U10 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U8 |
| 1 | Solenoid | 2 Position Wire to Board Terminal Block Horizontal with Board 0.197 (5:2 Position Wire to Board Terminal Block Horizontal with Board 0.197 (5.00mm) Through Hole | J8 |
| 1 | USONIC1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | USONIC2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | USONIC3 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | USONIC4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J17 |
| 1 | Voltmeter 1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | Voltmeter 2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J12 |
More from hughminhphan/PROJECTS
12- 2 layers68 × 23.4 mm

- 4 layers133.1 × 97.6 mm

- 2 layers

- 2 layers

- 2 layers135 × 95.3 mm

- 4 layers142.5 × 86.6 mm

- 2 layers

- 2 layers

- 2 layers99 × 99 mm

- 2 layers89 × 79 mm

- 2 layers206 × 197.4 mm

- 2 layers169 × 150 mm

Similar boards
- 6 layers16 × 35 mm

- 2 layers60 × 46 mm

Cardboard bot
ColumbiaGadgetWorks/cardboard-bot-v2
60 × 46 mm, 2-layer, 2 oz copper, for a 2S or 3S LiPo on a screw terminal. JLCPCB assembles the SMD parts on the top side; CGW hand-solders the through-hole parts. Nothing goes on the back.
67 parts - 2 layers153.6 × 50 mm

- 4 layers203.5 × 90 mm

BDCMotorController
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
323 partsMIT - 2 layers101.7 × 63.2 mm

New Proj
Nithin1777/PCB_DESIGNS
These are the PCB designs that I made for the robotics club and the department of electronics.
14 parts - 4 layers56 × 85 mm

- 2 layers160.5 × 146.5 mm

Schemav2
rayanyahiaoui13/24PowerLEDsController
The goal of this system is to provide independent and precise control of a 24-LED matrix composed of high-power LEDs to independently illuminate 24 wells of a Greiner plate containing duckweed.
146 parts1GPL-3.0 - 2 layers99.9 × 99.9 mm

Questions
How big is the Bulma PCB?
It measures 202.9 × 102.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bulma use?
77 parts, built around the ESP32-DEVKITC-VE, DRV8870DDAR, PCA9685PW and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bulma KiCad files?
From the hughminhphan/PROJECTS repository on GitHub, at the commit this page was made from: the board is Goku _ Vegeta/REDUNDANT/1.1/Bulma/Bulma.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bulma design in my own project?
Its repository states no licence, so its author keeps all rights: ask hughminhphan before reusing the design.