

Accnt
Smart home embedded devices based on Zephyr OS
- Size
- 19.7 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 64
- Pads
- 106
- Tracks, vias
- 86, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Dec 2020
- Updated
- 10 Oct 2026
Overview
Accnt is an open-source printed circuit board by hubertmis, from the hubertmis/zathome repository on GitHub. It is a 2-layer board of 19.7 × 23 mm with 18 parts on 64 nets, routed with 86 tracks and 10 vias.
It is built around the MIC5365-3.3YD5-TR and 2N7002E. Its parts include 7 resistors, 3 capacitors, 2 ICs, 2 diodes and 2 transistors.
Main components
2MIC5365-3.3YD5-TR
TSOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators2N7002E
SOT-23-55℃~+150℃ 1 N-channel 2.5V 225mW 3.5Ω@5V 300mA 60V N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETs
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R8, R9 |
| 3 | 2k2 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R10 |
| 2 | 1u | Capacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C1, C2 |
| 2 | 2N7002E | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | Conn_01x04_Male | Connector_JST:JST_ZE_SM04B-ZESS-TB_1x04-1MP_P1.50mm_Horizontal | J2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | Holyiot-18010 | holyiot:Holyiot-18010 | U1 |
| 1 | MIC5365-3.3YD5 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
More from hubertmis/zathome
5- 2 layers17.3 × 39.3 mm

- 2 layers43.9 × 24.3 mm

- 2 layers34.5 × 49.5 mm

- 2 layers24.9 × 43.1 mm

- 2 layers55 × 35 mm

Similar boards
- 6 layers31.7 × 110 mm

Eurorack pmod pcb
apfaudio/eurorack-pmod
A eurorack-friendly audio frontend compatible with many FPGA boards, based on the AK4619VN audio CODEC.
155 parts241 - 2 layers35 × 54 mm

Evoluent
mon/evoluent_better_pcb
PCBs using better sensor for Evoluent VerticalMouse products
30 parts11MIT - 4 layers34.8 × 36 mm

Atmxt2952td breakout
EvanKrall/ipad_touchscreen_driver
A PCB designed to interface with the iPad (A1219) touchscreen
53 parts7 - 2 layers

Aquarium controller
daniestevez/aquarium-controller
Arduino-based Aquarium controller
48 parts6Unlicense - 2 layers98.4 × 93.7 mm

Air Quality PCB
burnettlab/Indoor-Air-Quality-Monitor
2023 Portland State University Indoor Air Quality Monitor Capstone Project
48 parts3GPL-3.0 - 6 layers216 × 127 mm

Pufferfish Controller-1
pez-globo/pufferfish-electronics
Circuit schematics and PCB layouts for the Pufferfish ventilator.
559 parts3 - 4 layers70.1 × 122.2 mm

Gbc cm4-aio
will-tm/gbc-cm4-aio
This project is a drop-in replacement board that fits and Gameboy Color shell and use the same IPS display as used in GBC kits.
130 parts2 - 4 layers62.8 × 172 mm

Intensity pi
JQIamo/PI_wt_hold_for_laser_intensity_lock
PI controller with integrator hold control for laser intensity lock.
127 parts1
Questions
How big is the Accnt PCB?
It measures 19.7 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Accnt use?
18 parts, built around the MIC5365-3.3YD5-TR and 2N7002E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Accnt KiCad files?
From the hubertmis/zathome repository on GitHub, at the commit this page was made from: the board is accnt/pcb/accnt.kicad_pcb and its schematic accnt/pcb/accnt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Accnt design in my own project?
Its repository states no licence, so its author keeps all rights: ask hubertmis before reusing the design.