Skip to the content
2 layersGlider tx2, the printed circuit board in 3D

Glider using NRF24L01

Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
12
Pads
40
Tracks, vias
101, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Sep 2016
Updated
28 May 2019

Overview

Glider tx2 is an open-source printed circuit board by house4hack, from the house4hack/nrf-glider repository on GitHub. It is a 2-layer board with 12 parts on 12 nets, routed with 101 tracks and 0 vias.

It is built around the LM1117-3.3. Its parts include 4 connectors, 2 capacitors, 2 resistors, 1 IC and 1 switch.

Main components

1

Parts

12
QtyValueFootprintReferences
24k7Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_HorizontalR1, R3
2Conn_01x06_FemaleConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ4, J6
1100nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2
110uFCapacitor_THT:CP_Radial_D8.0mm_P2.50mmC1
14.5V - 9.9VConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalBT1
1BuzzerBuzzer_Beeper:Buzzer_15x7.5RM7.6BZ1
1Conn_01x05_FemaleConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_HorizontalJ1
1LM1117-3.3Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU4
1TRIMButton_Switch_THT:SW_PUSH_6mm_H5mmSW2
1UARTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5

More from house4hack/nrf-glider

2
  • 2 layers45.7 × 31.8 mmGlider RX SMD, the printed circuit board in 3D

    Glider RX SMD

    house4hack/nrf-glider

    Glider using NRF24L01

    22 parts
  • 2 layersGlider mcu, the printed circuit board in 3D

    Glider mcu

    house4hack/nrf-glider

    Glider using NRF24L01

    11 parts

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers52.5 × 36.6 mmESP8266-WebRadio, the printed circuit board in 3D

    ESP8266-WebRadio

    karawin/Ka-Radio

    A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

    52 parts453
  • 2 layers95.2 × 57.2 mmDomesdayDuplicator, the printed circuit board in 3D

    DomesdayDuplicator

    Domesday86/DomesdayDuplicator

    High-speed LaserDisc RF sampler

    66 parts325GPL-3.0
  • 2 layers189.5 × 204.9 mmSmartSpin2k Panelized, the printed circuit board in 3D

    SmartSpin2k Panelized

    doudar/SmartSpin2k

    Transform your spin bike into a Smart Trainer!

    749 parts292GPL-2.0
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 4 layers113.5 × 105.5 mmMultistepper, the printed circuit board in 3D

    Multistepper

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    243 parts208
  • 2 layers275 × 103 mmKeebee, the printed circuit board in 3D

    Keebee

    blakesmith/embedded

    Blake's embedded projects

    159 parts167
  • 2 layers43 × 34.3 mmEspway, the printed circuit board in 3D

    Espway

    espway/espway

    Segway-like robot implemented on ESP8266

    37 parts122LGPL-3.0

Questions

What parts does the Glider tx2 use?

12 parts, built around the LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Glider tx2 KiCad files?

From the house4hack/nrf-glider repository on GitHub, at the commit this page was made from: the board is docs/nrf_glider/glider_tx2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Glider tx2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask house4hack before reusing the design.