

- Size
- 52 × 23 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 54
- Pads
- 201
- Tracks, vias
- 892, 63
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Mar 2023
- Updated
- 13 Mar 2023
Overview
STM32F401CCT6 is an open-source printed circuit board by horizonvert1027, from the horizonvert1027/STM32F401CCT6-Development-PCB-Design-using-KiCAD repository on GitHub. It is a 2-layer board of 52 × 23 mm with 47 parts on 54 nets, routed with 892 tracks and 63 vias.
It is built around the MIC5219-3.3YMM and USBLC6-2SC6. Its parts include 19 capacitors, 11 resistors, 5 connectors, 3 ICs and 2 diodes. It belongs with the STM32 boards of this library.
Main components
2MIC5219-3.3YMM
MSOP-8-40℃~+125℃ 1 12V 3.3V 500mA 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive MSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1U,0603 | Capacitors_SMD:C_0603 | C5, C12, C13, C14, C17, C18 |
| 4 | 20p,0603 | Capacitors_SMD:C_0603 | C6, C7, C8, C9 |
| 3 | 20R,0603 | Resistors_SMD:R_0603 | R3, R4, R9 |
| 2 | 0.1uF,0603 | Capacitors_SMD:C_0603 | C16, C19 |
| 2 | 100K,0603 | Resistors_SMD:R_0603 | R7, R8 |
| 2 | 10K | Resistors_SMD:R_0603 | R1, R11 |
| 2 | 22n,0603 | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | 4.7uF,0603 | Capacitors_SMD:C_0603 | C10, C11 |
| 1 | 10U,0603 | Capacitors_SMD:C_0603 | C4 |
| 1 | 1M | Resistors_SMD:R_0603 | R2 |
| 1 | 1U,0603 | Capacitors_SMD:C_0603 | C3 |
| 1 | 32.786K | Crystals:Crystal_SMD_SeikoEpson_MC306-4pin_8.0x3.2mm | Y1 |
| 1 | 4.7K | Resistors_SMD:R_0603 | R10 |
| 1 | 4.7u,0603 | Capacitors_SMD:C_0603 | C15 |
| 1 | 510R,0603 | Resistors_SMD:R_0603 | R5 |
| 1 | 510R,603 | Resistors_SMD:R_0603 | R6 |
| 1 | 8MHz | Crystals:Crystal_HC49-4H_Vertical | Y2 |
| 1 | BLUE_LED | LEDs:LED_0805 | D2 |
| 1 | Conn_01x05_desc | Pin_Headers:Pin_Header_Angled_1x05_Pitch2.54mm | J4 |
| 1 | Conn_01x20 | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J5 |
| 1 | Conn_01x20_des | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J3 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J2 |
| 1 | G*** | crystal:HS_Crystal | HS_Crystal |
| 1 | G*** | crystal:LS_Crystal | LS_Crystal |
| 1 | G*** | crystal:Dot | Dot |
| 1 | G*** | crystal:Meow | Meow |
| 1 | MIC5219-3.3 | TO_SOT_Packages_SMD:SOT-23-5 | U1 |
| 1 | RED_LED | LEDs:LED_0805 | D1 |
| 1 | STM32F401CCT6 | QFN_QFP48 | U2 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USBLC6-2SC6 | TO_SOT_Packages_SMD:SOT-23-6 | U3 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Molex-105017-0001 | J1 |
Similar boards
- 2 layers136 × 58 mm

- 2 layers82.8 × 63 mm

- 2 layers36.2 × 36.2 mm

- 2 layers100 × 100 mm

- 2 layers

Controller NRF24L01 Include
Minorzar/2223_Projet1A_SNES_Controller
This is the repository of the snes project made in the ENSEA by the 2025 promotion.
90 parts1 - 2 layers324.6 × 115.9 mm

- 2 layers80 × 35.4 mm

- 4 layers65 × 73 mm

Questions
How big is the STM32F401CCT6 PCB?
It measures 52 × 23 mm and has 2 copper layers, 1.6 mm thick.
What parts does the STM32F401CCT6 use?
47 parts, built around the MIC5219-3.3YMM and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F401CCT6 KiCad files?
From the horizonvert1027/STM32F401CCT6-Development-PCB-Design-using-KiCAD repository on GitHub, at the commit this page was made from: the board is STM32F401CCT6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F401CCT6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask horizonvert1027 before reusing the design.