2 layers160.2 × 60.2 mm
Controler NRF24L01 Exclude
Minorzar/2223_Projet1A_SNES_Controller
This is the repository of the snes project made in the ENSEA by the 2025 promotion.
82 parts1
2 layers
Controller NRF24L01 Include
Minorzar/2223_Projet1A_SNES_Controller1This is the repository of the snes project made in the ENSEA by the 2025 promotion.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 85
- Pads
- 311
- Tracks, vias
- 846, 136
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Apr 2023
- Updated
- 3 Oct 2023
Overview
Controller NRF24L01 Include is an open-source printed circuit board by Minorzar, from the Minorzar/2223_Projet1A_SNES_Controller repository on GitHub. It is a 2-layer board with 90 parts on 85 nets, routed with 846 tracks and 136 vias.
It is built around the NRF24L01, PCA9685PW and MIC5219-3.3YMM. Its parts include 26 resistors, 19 diodes, 13 capacitors, 13 switches and 4 ICs. It belongs with the retro computing and games boards and the STM32 boards of this library.
Main components
3
NRF24L01
QFN-20-EP(4x4)-40℃~+85℃ -85dBm 0dBm 1.9V~3.6V 2.4GHz 2Mbps CRC check function、Automatic response function、Automatic retransmission function SPI QFN-20-EP(4x4) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICs
PCA9685PW
TSSOP-28-40℃~+85℃ 100kHz~1MHz 16 2.3V~5.5V 25mA 5.5V Built-in PWM TSSOP-28 LED Drivers ROHSNXP SemiconductorsLED Drivers
MIC5219-3.3YMM
MSOP-8-40℃~+125℃ 1 12V 3.3V 500mA 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive MSOP-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdSNES Project (Controller)
This is the repository of the SNES project carried out at ENSEA by the promotion of 2025.
In the first year, as part of a three-month project, we will attempt to create our own version of the SNES controller. The aim will be to complete the controller ourselves, both in terms of hardware and software, while adding features that were not present on the original controller. However, this is only the first part of our SNES project, as we'll be continuing the project next year, this time focusing on the console itself. As such, this repository will probably only contain files relevant to the controller.
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26 +3 |
| 11 | SW_SPST | Button_Switch_SMD:SW_SPST_B3S-1000 | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW11, SW12, SW13 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9, R10 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R6, R7 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C13 |
| 2 | 22nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C8 |
| 2 | SW_DIP_x01 | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW1, SW10 |
| 1 | 1.0pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 1 | 1.5pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L3 |
| 1 | 22K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 3.9nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L2 |
| 1 | 33nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | 4.7pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 8.2nH | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L1 |
| 1 | C_Small | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J2 |
| 1 | D_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 1 | D_Small | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | G1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | G2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5 |
| 1 | G3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6 |
| 1 | G4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | G5 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8 |
| 1 | G6 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D9 |
| 1 | G7 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D10 |
| 1 | G8 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D11 |
| 1 | L | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | TP2 |
| 1 | LED_Small | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | MIC5219-3.3YMM | Package_SO:MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | NRF24L01 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | O1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D12 |
| 1 | O2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13 |
| 1 | O3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D14 |
| 1 | O4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D15 |
| 1 | PCA9685PW | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 1 | R | Connector_Coaxial:SMA_Molex_73251-1153_EdgeMount_Horizontal | TP1 |
| 1 | R1 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D16 |
| 1 | R2 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D17 |
| 1 | R3 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D18 |
| 1 | R4 | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D19 |
| 1 | STM32L412KBTx | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | ~ | RF_Antenna:Texas_SWRA117D_2.4GHz_Right | Antenna_nRF1 |
More from Minorzar/2223_Projet1A_SNES_Controller
4- 2 layers36 × 40 mm
Plug NRF24L01 Include
Minorzar/2223_Projet1A_SNES_Controller
This is the repository of the snes project made in the ENSEA by the 2025 promotion.
55 parts1 - 2 layers36 × 24 mm
Plug NRF24L01 Exclude
Minorzar/2223_Projet1A_SNES_Controller
This is the repository of the snes project made in the ENSEA by the 2025 promotion.
39 parts1 - 2 layers38 × 34 mm
Plug NRF24L01 Exclude
Minorzar/2223_Projet1A_SNES_Controller
This is the repository of the snes project made in the ENSEA by the 2025 promotion.
39 parts1
Similar boards
- 2 layers139 × 55.2 mm
- 4 layers85 × 60 mm
- 2 layers136 × 58 mm
- 2 layers82.8 × 63 mm
- 2 layers36.2 × 36.2 mm
- 2 layers100 × 100 mm
- 2 layers52 × 23 mm
- 2 layers324.6 × 115.9 mm
Questions
What parts does the Controller NRF24L01 Include use?
90 parts, built around the NRF24L01, PCA9685PW and MIC5219-3.3YMM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller NRF24L01 Include KiCad files?
From the Minorzar/2223_Projet1A_SNES_Controller repository on GitHub, at the commit this page was made from: the board is Project_controller/Hardware/Kicad/# Unused/Controller_NRF24L01_Include/Controller_NRF24L01_Include.kicad_pcb and its schematic Project_controller/Hardware/Kicad/# Unused/Controller_NRF24L01_Include/Controller_NRF24L01_Include.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller NRF24L01 Include design in my own project?
Its repository states no licence, so its author keeps all rights: ask Minorzar before reusing the design.