

SAO speaker and controller
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 19
- Pads
- 60
- Tracks, vias
- 145, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 May 2021
- Updated
- 28 Nov 2021
Overview
SAO speaker and controller is an open-source printed circuit board by heyspacebuck, from the heyspacebuck/kicad_goose repository on GitHub. It is a 2-layer board with 18 parts on 19 nets, routed with 145 tracks and 7 vias.
It is built around the ATTINY85-20SU and TPS613222ADBV. Its parts include 6 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)TPS613222ADBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 5V 6.5uA 900mV~5.5V Boost Boost Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1 μF | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 1 kΩ | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 0.01 μF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10 pF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 2.2 μH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 22 μF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 4.7 μF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | AT42QT1011-TSHR | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | ATtiny85-20SU | Package_SO:SOIJ-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | D | Diode_SMD:D_SOD-323 | D1 |
| 1 | G*** | label | svg2mod |
| 1 | LOGO | goose:honk_captouch_scaled_v2 | GOOSE1 |
| 1 | SAO Connector | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | SOICbite | goose:SOIC_clipProgSmall | J2 |
| 1 | SP-1609S 8Ω 0.5W speaker | goose:Speaker_SP-1609S | LS1 |
| 1 | TPS613222ADBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
More from heyspacebuck/kicad_goose
2- 2 layers

- 2 layers

Similar boards
- 2 layers65.1 × 30.1 mm

Photon Power Zero PCB r1 01
DavidMurrayP2P/PhotonPowerZero
A Solar Powered Raspberry Pi Board
56 parts59CERN-OHL-S-2.0 - 2 layers38 × 200 mm

SPACEDOS02A PCB01A
UniversalScientificTechnologies/SPACEDOS02
Solid-state PIN diode dosimeter for manned spacecraft. Liulin detector replacement.
120 parts8GPL-3.0 - 2 layers61.5 × 126.8 mm

Badge eda
theparanoids/keyhole-badge
The Paranoids have designed a sound-reactive LED electronic conference badge for DEFCON 2022. This repository contains the PCB design files for the badge and the source code to the firmware that runs on the…
88 parts7 - 2 layers93.5 × 48.2 mm

SPACEDOS01
UniversalScientificTechnologies/SPACEDOS01
Silicon diode dosimeter optimized for spacecraft dosimetry
92 parts5GPL-3.0 - 4 layers32 × 80 mm

- 2 layers22 × 42 mm

- 2 layers100 × 100 mm

QuickFeather Enviroment Monitor
bluetiger9/Breeze-SmartSensorHub
Battery & Solar powered Sensor Hub with ML capabilities and supports a wide variety of Sensors and Communication Modules.
31 parts2Apache-2.0 - 2 layers19 × 18 mm

Unni smartification c6-10.99-constraints
lk-ek/esphome-unni-co2-sniffer
An esp32-c3 based passive data sniffer for Unni CO2 sensor devices
77 parts2GPL-3.0
Questions
What parts does the SAO speaker and controller use?
18 parts, built around the ATTINY85-20SU and TPS613222ADBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SAO speaker and controller KiCad files?
From the heyspacebuck/kicad_goose repository on GitHub, at the commit this page was made from: the board is kicad/SAO-speaker-and-controller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SAO speaker and controller design in my own project?
Its repository states no licence, so its author keeps all rights: ask heyspacebuck before reusing the design.