2 layers100 × 100 mm QuickFeather Enviroment Monitor, the printed circuit board in 3D

QuickFeather Enviroment Monitor

Battery & Solar powered Sensor Hub with ML capabilities and supports a wide variety of Sensors and Communication Modules.

Full screen GitHub .kicad_pcb

Size: 100 × 100 mm
Copper layers: 2
Thickness: 1.6 mm
Parts: 31
Nets: 34
Pads: 164
Tracks, vias: 502, 19
Pours: 18
Routed: Yes
KiCad: KiCad 5 (file 20171130)
Created: 27 Mar 2021
Updated: 3 Jan 2024

Overview

QuickFeather Enviroment Monitor is an open-source printed circuit board by bluetiger9, from the bluetiger9/Breeze-SmartSensorHub repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 100 × 100 mm with 31 parts on 34 nets, routed with 502 tracks and 19 vias.

It is built around the TPS613222ADBV and FPF1107. Its parts include 6 ICs, 6 connectors, 4 capacitors, 4 resistors and 2 diodes. It belongs with the power boards of this library.

Main components

README

Hardware/KiCad/README.md

QuickFeather-Enviroment-Monitor

Category and platform

Power

Project files

Show this board on your page

https://pcbkit.io/boards/bluetiger9/Breeze-SmartSensorHub

The board's own page, for a message or a post.

Source

Repository: bluetiger9/Breeze-SmartSensorHub
Board file: Hardware/KiCad/QuickFeather-Enviroment-Monitor.kicad_pcb
Commit: 14490ab
Licence: Apache-2.0

Parts

Qty	Value	Footprint	References
6	MountingHole	MPAD	H1, H2, H3, H4, H5, H5
4	FPF1107	QuickFeather-Enviroment-Monitor:BGA4C40P2X2_84X84X60N	U1, U3, U4, U5
2	10u	Capacitor_SMD:C_0805_2012Metric	C3, C5
2	nc	Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder	R1, R2
1	100u	Capacitor_THT:CP_Radial_D6.3mm_P2.50mm	C4
1	1u	Capacitor_SMD:C_0805_2012Metric	C1
1	220	Resistor_SMD:R_0805_2012Metric	R3
1	4.7uH	Inductor_SMD:L_0805_2012Metric	L1
1	6.xV	Diode_SMD:D_SMA	D2
1	7k	Resistor_SMD:R_0805_2012Metric	R5
1	Air Quality	QuickFeather-Enviroment-Monitor:MikroBUS-Small	J4
1	Battery_Cell	Battery:BatteryHolder_Keystone_1042_1x18650	BT1
1	CJMCU-3935	QuickFeather-Enviroment-Monitor:CJMCU-3935	J5
1	Communication Module	QuickFeather-Enviroment-Monitor:MikroBUS-Medium	J3
1	LED_Small	LED_SMD:LED_0805_2012Metric	D1
1	MCP73831-2	Package_TO_SOT_SMD:SOT-23-5	U6
1	QuickFeather	QuickFeather-Enviroment-Monitor:quickfeather	J1
1	SolarPanel	Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical	J6
1	TPS613222ADBV	Package_TO_SOT_SMD:SOT-23-5	U2
1	UV CLick 3	QuickFeather-Enviroment-Monitor:MikroBUS-Small	J2

The 30 most common of 31 parts.

Similar boards

4 layers10 × 32 mm
NRF5340-Wearable
bluetiger9/nRF53-Wearable
Ultra-Low Power nRF53 Wearable
33 parts1MIT
2 layers65.1 × 30.1 mm
Photon Power Zero PCB r1 01
DavidMurrayP2P/PhotonPowerZero
A Solar Powered Raspberry Pi Board
56 parts59CERN-OHL-S-2.0
2 layers
SAO speaker and controller
heyspacebuck/kicad_goose

18 parts22
2 layers38 × 200 mm
SPACEDOS02A PCB01A
UniversalScientificTechnologies/SPACEDOS02
Solid-state PIN diode dosimeter for manned spacecraft. Liulin detector replacement.
120 parts8GPL-3.0
2 layers61.5 × 126.8 mm
Badge eda
theparanoids/keyhole-badge
The Paranoids have designed a sound-reactive LED electronic conference badge for DEFCON 2022. This repository contains the PCB design files for the badge and the source code to the firmware that runs on the…
88 parts7
2 layers93.5 × 48.2 mm
SPACEDOS01
UniversalScientificTechnologies/SPACEDOS01
Silicon diode dosimeter optimized for spacecraft dosimetry
92 parts5GPL-3.0
4 layers32 × 80 mm
EROS
Valeria/eRos-Psyche
Open Source Dildo running on the ESP32 Platform
52 parts5
2 layers22 × 42 mm
USB-2242
Embedded-Shark-LLC/USB-2242
Internal USB adapter for M.2 2242 slots
20 parts4

Questions

How big is the QuickFeather Enviroment Monitor PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the QuickFeather Enviroment Monitor use?

31 parts, built around the TPS613222ADBV and FPF1107. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the QuickFeather Enviroment Monitor KiCad files?

From the bluetiger9/Breeze-SmartSensorHub repository on GitHub, at the commit this page was made from: the board is Hardware/KiCad/QuickFeather-Enviroment-Monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the QuickFeather Enviroment Monitor design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).