Skip to the content
2 layers93.5 × 48.2 mmSPACEDOS01, the printed circuit board in 3D

Silicon diode dosimeter optimized for spacecraft dosimetry

Size
93.5 × 48.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
92
Nets
71
Pads
354
Tracks, vias
487, 188
Pours
24
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jan 2019
Updated
16 May 2026

Overview

SPACEDOS01 is an open-source printed circuit board by UniversalScientificTechnologies, from the UniversalScientificTechnologies/SPACEDOS01 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 93.5 × 48.2 mm with 92 parts on 71 nets, routed with 487 tracks and 188 vias.

It is built around the ATMEGA1284P-AU, BMI-S-204-F and BMI-S-210-F, with the OPA2314M/TR, TPS613222ADBV and PCF85263AT/AJ among its other parts. Its parts include 42 capacitors, 19 resistors, 9 connectors, 8 ICs and 2 diodes. It belongs with the sensors and measurement boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

9

README

README.md

SPACEDOS01B - Cosmic-ray spectrometer and dosimeter for unmanned spacecraft missions

SPACEDOS01B is a semiconductor-based dosimeter launched at Sokrat-R (NORAD ID 44404) satellite, currently orbiting the Earth about 500km above the surface. The device is intended for the measurement of cosmic radiation in mixed ionization fields on board satellites. In the case of manned missions look to SPACEDOS02 or SPACEDOS03.

SPACEDOS01B device from bottom side SPACEDOS01B device from top side

The device can be purchased from Universal Scientific Technologies s.r.o. Contact us by email at sale@ust.cz for a commercial quotation.

The main technical parameters are the following

  • Silicon PIN diode detector with ~12.5 mm³ detection volume
  • Measurement environment: vacuum < 3.2×10e−2 Pa
  • Number of energy channels: 250
  • Deposited energy range: from 200 keV to 12 MeV
  • Energy measurement resolution: < 50 keV/channel
  • Power supply: 3.3 V / 3 mA
  • Integration time: 15 s
  • Interface: RS232 TTL
  • Dimensions(HxWxL): 15mm x 41mm x 94 mm
  • Weight 33 g

Technical documentation

References

Parts

92
QtyValueFootprintReferences
20100nFMlab_R:SMD-0805C2, C10, C11, C12, C13, C14, C16, C20, C26, C27, C28, C31, C32, C34, C35, C39 +4
1110uFMlab_R:SMD-0805C4, C6, C7, C8, C9, C21, C23, C36, C40, C42, C50
510kMlab_R:SMD-0805R7, R12, R20, R21, R23
54k7Mlab_R:SMD-0805R9, R11, R15, R19, R22
4470RMlab_R:SMD-0805R2, R3, R4, R5
4HEADER_1x01Mlab_Pin_Headers:Straight_1x01J4, J5, J6, J7
4HOLEMlab_Mechanical:MountingHole_3mmM1, M2, M3, M4
34u7Mlab_R:SMD-0805C3, C17, C43
3BMI-S-204-FRF_Shielding:Laird_Technologies_BMI-S-204-F_32.00x32.00mmM8, M9, M10
2HEADER_2x01_PARALLELMlab_Pin_Headers:Straight_1x02J2, J3
2NFM21PC105-1uFMlab_L:FIR_0805C29, C52
2OPA2314Mlab_IO:SOIC-8_3.9x4.9mm_Pitch1.27mmU1, U2
110MMlab_R:SMD-0805R6
110RMlab_R:SMD-0805R1
110uH - LQH32CN100K23LMlab_R:SMD-1210L1
11kMlab_R:SMD-0805R8
11k2Mlab_R:SMD-0805R10
11nF/NP0Mlab_R:SMD-0805C19
11pFNP0 251R15S1R0AV4EMlab_R:SMD-0805C5
11uFMlab_R:SMD-0805C24
122uFMlab_C:TantalC_SizeC_ReflowC1
12R2Mlab_R:SMD-0805F2
12k2Mlab_R:SMD-0805R13
12n2Mlab_R:SMD-0805C18
13n3Mlab_R:SMD-0805C15
1ABS07-120-32.768KHZ-TMlab_XTAL:ABS07Y2
1ATMEGA1284P-AUPackage_QFP:TQFP-44_10x10mm_P0.8mmU10
1BMI-S-210-FMlab_Mechanical:BMI-S-210-FM6
1BZV55C-5,6VDiode_SMD:D_MiniMELFD3
1DFE252012P-4R7MResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderL3
1HEADER_2x01Mlab_Pin_Headers:Straight_1x02J1
1HEADER_2x01_PARALLELMlab_Pin_Headers:Straight_2x01J19
1HEADER_2x03Mlab_Pin_Headers:SMD_2x03J22
1ISL21080DIH312Z-TK 1V25Package_TO_SOT_SMD:SOT-23U3
1PCF85263AMlab_IO:TSSOP-10_3x3mm_Pitch0.5mmU11
1S2744-09Mlab_D:HAMAMATSU_S11773-02D1
1TPS613222ADBVPackage_TO_SOT_SMD:SOT-23-5U8
1TS5A4594Package_TO_SOT_SMD:SOT-23-5_HandSolderingU5
1TS7211Package_TO_SOT_SMD:SOT-23-5_HandSolderingU4

Similar boards

  • 4 layers90.9 × 50.3 mmUSTSIPIN02, the printed circuit board in 3D

    USTSIPIN02

    ust-modules/USTSIPIN02

    Silicon diode dosimeter and spectrometer.

    174 partsGPL-3.0
  • 2 layers38 × 200 mmSPACEDOS02A PCB01A, the printed circuit board in 3D

    SPACEDOS02A PCB01A

    UniversalScientificTechnologies/SPACEDOS02

    Solid-state PIN diode dosimeter for manned spacecraft. Liulin detector replacement.

    120 parts8GPL-3.0
  • 2 layers60.5 × 40.1 mmPCRD04B, the printed circuit board in 3D

    PCRD04B

    mlab-modules/PCRD04

    Silicon PIN diode cosmic radiation detector

    62 parts4GPL-3.0
  • 2 layers60.5 × 40.1 mmPCRD05, the printed circuit board in 3D

    PCRD05

    mlab-modules/PCRD05

    Silicon photomultiplier based radiation detector

    57 partsGPL-3.0
  • 2 layers60.5 × 40.1 mmPIND02, the printed circuit board in 3D

    PIND02

    mlab-modules/PIND02

    PIN diode semiconductor radiation detector analog front-end.

    58 parts1GPL-3.0
  • 2 layers136.2 × 85.9 mmBATDATUNIT01, the printed circuit board in 3D

    BATDATUNIT01

    mlab-modules/BATDATUNIT01

    Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.

    225 parts5GPL-3.0
  • 2 layers80.8 × 101.1 mmDATALOGGER01, the printed circuit board in 3D

    DATALOGGER01

    mlab-modules/DATALOGGER01

    Universal Arduino based data logger to SDcard.

    90 parts1GPL-3.0
  • 2 layers80.8 × 40.1 mmPCRD03, the printed circuit board in 3D

    PCRD03

    mlab-modules/PCRD03

    Silicon PIN diode cosmic radiation detector

    165 partsGPL-3.0

Questions

How big is the SPACEDOS01 PCB?

It measures 93.5 × 48.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SPACEDOS01 use?

92 parts, built around the ATMEGA1284P-AU, BMI-S-204-F, BMI-S-210-F and OPA2314M/TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SPACEDOS01 KiCad files?

From the UniversalScientificTechnologies/SPACEDOS01 repository on GitHub, at the commit this page was made from: the board is hw/sch_pcb/SPACEDOS01.kicad_pcb and its schematic hw/sch_pcb/SPACEDOS01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SPACEDOS01 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).