

PowerSW
- Size
- 26.7 × 11.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 13
- Pads
- 58
- Tracks, vias
- 59, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Jan 2022
- Updated
- 22 Sep 2026
Overview
PowerSW is an open-source printed circuit board by Heorenmaru, from the Heorenmaru/Hardware repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 26.7 × 11.7 mm with 32 parts on 13 nets, routed with 59 tracks and 0 vias.
It is built around the AO3400A, AO3401A and BLM21PG221SH1. Its parts include 7 resistors, 4 capacitors, 2 ICs, 2 diodes and 2 transistors.
Main components
3AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsBLM21PG221SH1
08051 220Ω@100MHz 2A 45mΩ ±25% 0805 Ferrite Beads ROHSMurataFerrite Beads
README
README.mdHardware
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | , , | ||
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4 |
| 3 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP4, TP6, TP8 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 2 | OUT | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5, TP5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 3v3 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CHR | TestPoint:TestPoint_Pad_1.0x1.0mm | TP3 |
| 1 | EN | TestPoint:TestPoint_Pad_1.0x1.0mm | TP7 |
| 1 | L78L33_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | PWR | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | blm21pg221 | Inductor_SMD:L_1806_4516Metric_Pad1.45x1.90mm_HandSolder | FB1 |
More from Heorenmaru/Hardware
4- 2 layers55.3 × 35.9 mm

- 2 layers30.4 × 25.2 mm

- 2 layers39.9 × 30.6 mm

- 2 layers17.7 × 19.6 mm

Similar boards
- 2 layers100 × 62 mm

Analog board
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
138 parts - 6 layers100 × 50 mm

Archive
sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.
92 parts12GPL-3.0 - 4 layers40 × 40 mm

- 2 layers

- 4 layers92 × 88 mm

IOT
Habib-creater/ESP32-IoT-Monitoring-Control-Board
4-layer ESP32-based IoT monitoring and control board with environmental sensing, relay control, USB-C, and Qwiic expansion.
63 parts1 - 4 layers100 × 100 mm

- 4 layers100 × 80 mm

ESP32
Tanmayeers/Projects
Specifications: 1. Operting Voltage: 9V 2. Operating Current: 200mA 3. Output Voltage Swing: 6.5V 4. 3dB - Bandwidth: 100 ± 10 Hz 5. Noise: 5.406mVrms
63 parts1 - 2 layers77.5 × 66 mm

Flight Computer V1
colin-skinner/Cesium
The main goal of this project is not simply to learn, but to focus on following through and finishing each sprint.
92 parts
Questions
How big is the PowerSW PCB?
It measures 26.7 × 11.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PowerSW use?
32 parts, built around the AO3400A, AO3401A and BLM21PG221SH1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PowerSW KiCad files?
From the Heorenmaru/Hardware repository on GitHub, at the commit this page was made from: the board is PowerSW/PowerSW/PowerSW.kicad_pcb and its schematic Geiger/geiger/geiger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PowerSW design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).