
PWR Control
- Size
- 39.9 × 30.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 30
- Pads
- 121
- Tracks, vias
- 180, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Jan 2022
- Updated
- 22 Sep 2026
Overview
PWR Control is an open-source printed circuit board by Heorenmaru, from the Heorenmaru/Hardware repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 39.9 × 30.6 mm with 56 parts on 30 nets, routed with 180 tracks and 0 vias.
It is built around the MT3608, MAX40200AUK and AO3400A, with the AO3401A among its other parts. Its parts include 22 resistors, 7 diodes, 6 capacitors, 5 ICs and 4 transistors.
Main components
4MT3608
SOT-23-6-40℃~+85℃ 1 1.2MHz 100uA、1.6mA 2A 2V~24V Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC ConvertersMAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)UncategorisedAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdHardware
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R3, R4, R5, R6, R10, R11, R12, R13, R14, R17, R18, R19, R20, R21, R22 +3 |
| 6 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 4 | D | Diode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2, D3, D5 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q5 |
| 2 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2, Q4 |
| 2 | GNDi | TestPoint:TestPoint_Pad_1.5x1.5mm | TP6, TP6 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D6, D7 |
| 2 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U1, U3 |
| 2 | R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R16 |
| 1 | 0R5 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 5V_DC | TestPoint:TestPoint_Pad_D1.5mm | TP8 |
| 1 | CONTROL | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | CUR | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | D | Diode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolder | D4 |
| 1 | EN | TestPoint:TestPoint_Pad_D1.0mm | E1 |
| 1 | FB | TestPoint:TestPoint_Pad_D1.0mm | FB1 |
| 1 | GNDo | TestPoint:TestPoint_Pad_1.5x1.5mm | TP7 |
| 1 | L | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | MAX40200AUK | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | PWR | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USB | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
More from Heorenmaru/Hardware
4- 2 layers55.3 × 35.9 mm

- 2 layers30.4 × 25.2 mm

- 2 layers26.7 × 11.7 mm

- 2 layers17.7 × 19.6 mm

Similar boards
- 2 layers80 × 25 mm

- 4 layers90 × 95 mm

Wiegand bridge
EdgeCoil/wiegand-bridge
ESP32-S3 Wiegand reader bridge for Home Assistant: 4-layer board, BOM and ESPHome firmware.
197 parts1 - 2 layers150 × 40 mm

- 2 layers100 × 73.9 mm

Security Alarm Panel
Matyas604/Security-Alarm-Panel
Home Assistant Smart Home Alarm Control Panel with fingerprint reader, NFC/RFID card reader, motion radar, and touchscreen TFT display. It can control your smart home, not just your home security system.
132 parts1GPL-3.0 - 2 layers109.7 × 95.3 mm

Better pelarboj
obobed/flytboj
(in the real assembled version, the components should be facing down to allow space for the actual original LED board, but here it's the wrong side up in order to showcase the PCB so you can see more than just a blank…
65 partsGPL-3.0 - 2 layers94.9 × 69 mm

ECU
rivotmotors-rnd/ECU_Firmware_V3
RIVOT ECU V3.0 Repo containing STM32F446RE firmware and KiCad PCB hardware designs.
115 parts - 2 layers50 × 50 mm

PCB DRONE
shreejita56/XiZi-PCB-DRONE
So I made a custom PCB based on Esp32 . It holds an IMU and a Barometer for control . It has a normal 4 Motor Layout 2 motors will move clock wise and 2 will be anti-clock wise direction.
68 parts - 2 layers82.6 × 94.6 mm

Questions
How big is the PWR Control PCB?
It measures 39.9 × 30.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PWR Control use?
56 parts, built around the MT3608, MAX40200AUK, AO3400A and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PWR Control KiCad files?
From the Heorenmaru/Hardware repository on GitHub, at the commit this page was made from: the board is VRTrackerPOWER/PWR_Control/PWR_Control.kicad_pcb and its schematic Geiger/geiger/geiger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PWR Control design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).